Question about Garmin Nuvi 610 GPS Receiver
I used the Garmin webupdater to update my nuvi 610 after I disconnected I turned on the device and realised I had lost my map detail the basemap is still there but none of the small roads are there anymore(I have no gmapsupp.img file). I have a copy of City navigator europe NT v9 which I have viewed with mapsource and it has all the detail I need but I cant work out a way to recreate my original gmapsupp.img file. Hope someone can help i'm desperate
Do a hard reset on the device. Download Garmin Express and install it to your PC. Connect your device to your PC. Garmin Express will identify it and allow you to install all the maps and software that the device has a subscription to.
Posted on May 02, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I'm a little unclear as to what you're trying to accomplish.... you said the Routes are already on the SD card.... It sounds like you are trying to send them to your computer so you can view them there.... Is that correct? Are you able to access the Routes on the SD card using the iQue itself?
I personally use an iQue 3600, so I should be able to get you squared away with a little more info.
Posted on Nov 07, 2007
SOURCE: Garmin nuvi 250 mapsource
Verify that you have the correct basemap for the country that you are in. There are two maps inside a new Garmin. The basemap which shows all the major highways and mapsource which shows all the street. If you don't have the correct basemap try changing 'Navigation' Advoidance to avoid highways and Toll Roads.
Posted on Jan 28, 2008
1. Connect Nuvi3xx to PC vis USB Cable for 7xx to go into
mass storage mode.
2. Slide Power Switch to the right (LOCK Position)
3. Click the "Safely Remove Hardware" icon in system
Tray on PC (Lower Right)
4. Click on "Safely remove USB Mass Storage Device -
Drives(x:and y:)" x: = mass storage for the 3xx and y: = the
SD card if one is installed
5. WAIT for 3xx to Boot UP.
6. After 360 Boots UP slide power switch to center
Posted on Sep 30, 2008
Tips for a great answer:
Jan 18, 2010 | Garmin nuvi 750 GPS Receiver
Dec 20, 2009 | Garmin nuvi 250W GPS Receiver
Dec 12, 2009 | Garmin Nuvi 660 GPS Receiver
Nov 15, 2009 | Garmin nuvi 200W GPS Receiver
Oct 11, 2009 | Garmin nuvi 200W GPS Receiver
Oct 04, 2009 | Garmin nuvi 200W GPS Receiver
Sep 18, 2009 | Garmin nuvi 200W GPS Receiver
Sep 03, 2009 | Garmin Nuvi 360 Bilingual GPS Navigator...
Jun 23, 2009 | Garmin nuvi 260W GPS Receiver
Jan 21, 2009 | Garmin nuvi 200W GPS Receiver
399 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: