Question about Canon PIXMA MP150 All-In-One InkJet Printer

1 Answer

Waste ink absorber is almost full

I have a Canon Pixma MP 110 and after 2 years it says that the waste ink absorber is almost full.
It still prints untill now.
I read the solutions on the internet to reset the waste ink counter but I didn't manage to fix that with the descriptions of the types indicated.
Is there a way to fix it with the MP 110?
If I managed that I will manually try to clean the felt pads.

Posted by on

  • akroneman Oct 23, 2008

    Just the last part was slightly different.

    Click Copy - everything. Waste dropped to zero ; This didn't work but I could put the counter to zero myself manually.

    Thanks a lot.

  • julie-bobmc Oct 24, 2008

    My printer is telling me that my ink absorber is getting full and to press the tool button, but when I press the tool button nothing happens, and my printer is not working

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 74 Answers

Try this:
Resetting overflow error code for Printer Canon Pixma MP110

  1. Turn on the printer.
  2. Click Menu, and then Scan, Copy and Scan again. All - entered the service mode.
  3. Select Counter
  4. Click Copy - everything. Waste dropped to zero.
  5. Turn off the printer POWER button.
Good luck

Posted on Oct 14, 2008

1 Suggested Answer

komguy
  • 2306 Answers

SOURCE: HOW DO I REPLACE MY CANON PIXMA MP 110 WASTE INK THANKS VERY MUCH

Replacing is not the only problem, Canon didn't make any parts available for that machine and there's no way to reset the error code.

Posted on Dec 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Canon Pixma MP 130/110 Printer. Machine is not printing. Have been through all the recommended cleaning/ maintenance procedures several times and fitted new ink cartridges all to no avail. Message...


Pixma IP3000
1. Turn off printer.
2. retaining button Resume/Cancel press button POWER - indicator it will catch fire by green color.
3. let go button Resume/Cancel, continuing to retain POWER.
4. press button Resume/Cancel of 2 times, retaining POWER, after which let go all buttons.
5. when indicator will be lit BY GREEN - press button Resume/Cancel of 4 times!!!
6. turn off printer by button POWER.

Mar 06, 2011 | Canon PIXMA MP130 All-In-One InkJet...

1 Answer

Pixma MP 130/110 Printer/Copier/Scanner waste ink absorber full, It neither prints nor copies


Cleaning the waste ink pads is easy.

Are your ink tanks empty and have you been using non Canon cartridges?

Regards,
Worldvet

Aug 01, 2008 | Canon Printers & Copiers

2 Answers

Canon pixma ip8500, on third print head in about 4 years. will not print yellow despite repeated head cleaning cycles, now waste ink absorber is full. need instructions for emptying/replacing said...


the waste ink absorber cannot be replaced mate. you have to buy new printer.the waste ink absorber is the sponge part where head cleans all its ink. its a common problem in cannon.

Oct 01, 2010 | Canon PIXMA iP8500 InkJet Photo Printer

1 Answer

My printer shows E 2 7. how can i fix it?


i believe on this model the error code means that the ink tank is full...
http://www.mediafire.com/?s2pa54m5z2wqwru
this is a link to my hosting site where you can download the software reset tool for a the MP models...
To reset waste ink counter at printers canon pixma MP150, MP160, MP170, MP180, MP450 and MP460 there any 2 choice, that is :
  • Start with printer on then run this software
  • Click Reset Main (main) to reset waste ink counter and then click Reset Platen button (additional)
Additional information error codes for the MP models...
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

Aug 07, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

HOW DO I REPLACE MY CANON PIXMA MP 110 WASTE INK THANKS VERY MUCH


Replacing is not the only problem, Canon didn't make any parts available for that machine and there's no way to reset the error code.

Dec 04, 2009 | Printers & Copiers

1 Answer

My Canon Pixma MP 170 tells methe waste ink absorber is full...


It is a shop repair since you have to use Canon diagnostics to reset the count and clear the error. The new part is around $10.00 only.

Jul 01, 2009 | Printers & Copiers

1 Answer

MP 450...Waste Ink Absorber Full..Does not print


1.Go to: http://www.usa.canon.com/consumer/controller?act=SupportIndexAct
2. Menu 1, select "Multifunction"
3. Menu 2, select "Inkjet"
4. Menu 3, select "PIXMA MP450"
5. Click the "Go" button.
6. Under "Search Our KnowledgeBase", type: "Waste Ink Absorber Full"
7. Click the "Search" button
8. In the search results, select "1. ');includeTableSubmitItem(12835, 'ERROR LCD: The ink absorber is almost full. Press [OK] to continue but early replacement recommended. '); return false;" class="midredlink">ERROR LCD: The ink absorber is almost full. Press [OK] to continue but early replacement recommended. <See manual>"
9. In the next page, select "1. Ink absorber replacement options - MP450". A page will be displayed describing how to fix this problem.

May 16, 2009 | Canon Pixma MP450 All-In-One InkJet...

1 Answer

Cartridge jammed / Waste Ink absorber almost full


Hi,
Waste ink pad or pads are full and need changing.
Under your ink carraige cradle it is,
It will be full, bit of a dirty job.

Hope this helps
Ric.


Apr 17, 2009 | Printers & Copiers

1 Answer

Printer says ''waste Ink absorber is full'' see service center


This is what the manual says: Ink used for cleaning is absorbed in a waste ink absorber placed in the machine. Press [OK] to cancel the error so that you can continue printing. Once the waste ink absorber becomes completely full, printing cannot be done until the waste ink absorber is replaced.
Canon recommends to contact a Canon service representative as soon as possible.

Nov 12, 2008 | Canon PIXMA MP150 All-In-One InkJet...

4 Answers

Canon printer mp160 e27


how can i get my ink absorber to be unful and work agian so i can print again WANALI

Aug 26, 2008 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

1,835 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...