Question about Saniflo SaniPlus-Round SaniPlus Macerator Toilet with Round Bowl

1 Answer

Toilet pan installation procedure

The procedure to join pan to waste pipe without leaking. do i silicone around rubber seal

Posted by on

  • sue1118 May 11, 2010

    Hi

    I tried to put one of those 'blue blocks' which colour the water into the cistern. Unfortunately in doing so I yanked the cover off and broke a plastic circle which connects the plunger button to the it that it operates. Now it is in bits and I don't know how the plunger button connects to the plunger - although I have the bits I don'e know how to put them together as they don't seem to fit!



    Sue

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 171 Answers

Hi muller2012,

I'm Harvey the Master Plumber.

Your question is: the procedure to join pan to waste pipe without leaking. do i silicone around rubber seal?

In 30 years this is the first time I've heard of a toilet "pan". If you're refering to the bowl, it connects with a wax ring and a pair of bolts. You then caulk around where the bowl meets the floor to keep cleaning liquids from getting under and getting stinky. If this is not a standard toilet it would be a good idea to post pictures and give make and model.

Feel free contact me again!
Please give me a rating here at fixya before you sign off
Thank you,
Harvey your Master Plumber

Posted on Oct 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need to remove cover over water cisten


Water leaks from toilets are common on the seal behind the pan. Have a look where the pipe runs from the cistern to the back of the pan. There is a rubber flange gasket which fits over the spout on the back of the pan. These are common to split. The toilet will leak normally when you flush it. After flushing, the leak stops.

Mar 13, 2016 | Home

1 Answer

How do i change the oil pan on a 2007 ford f150 4.2L v6?


4.2L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
    WARNING
    During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure.
  2. Raise and safely support the vehicle.
  3. Remove the starter.
  4. Drain the engine oil. Install the drain plug when finished.
  5. Remove the 4 bolts and the crossmember.
  6. Remove the 3 oil pan-to-transmission bolts.
  7. Remove the 17 bolts and the oil pan.
  8. Remove and discard the oil pan rear seal.
To install:

WARNING
Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools cause scratches and gouges which make leak paths. Use silicone gasket remover and a plastic scraping tool to remove all traces of old sealant. Follow the directions on the packaging.
  1. Clean the gasket mating surfaces using silicone gasket remover, a plastic scraping tool and metal surface prep. Follow the directions on the packaging.
    NOTE
    If the oil pan is not secured within 4 minutes, the sealant must be removed and the sealing areas cleaned. To clean the sealing area, use silicone gasket remover and metal surface prep. Follow the directions on the packaging. Failure to follow this procedure can cause future oil leakage.
  2. Apply silicone gasket and sealant to the oil pan sealing areas shown and install the oil pan rear seal.
  3. Apply silicone gasket and sealant to the rear main bearing cap.
  4. Install the oil pan rear seal.
  5. Apply a bead of silicone gasket and sealant to the oil pan mating surface.
  6. Position the oil pan and install the bolts. Tighten the bolts in the sequence shown. Tighten to 10 Nm (89 inch lbs.).
  7. Install the 3 oil pan-to-transmission bolts. Tighten to 34 Nm (25 ft. lbs).
  8. Install the starter.
  9. Position the crossmember and install the 4 bolts. Tighten to 90 Nm (66 ft. lbs.).


26094896-ivvnvjgd1uemkjtm4rdse3pw-2-1.gif

Feb 15, 2016 | Ford Cars & Trucks

1 Answer

How do i change out the oil pan?


4.2L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
    WARNING
    During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure.
  2. Raise and safely support the vehicle.
  3. Remove the starter.
  4. Drain the engine oil. Install the drain plug when finished.
  5. Remove the 4 bolts and the crossmember.
  6. Remove the 3 oil pan-to-transmission bolts.
  7. Remove the 17 bolts and the oil pan.
  8. Remove and discard the oil pan rear seal.
To install:

WARNING
Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools cause scratches and gouges which make leak paths. Use silicone gasket remover and a plastic scraping tool to remove all traces of old sealant. Follow the directions on the packaging.
  1. Clean the gasket mating surfaces using silicone gasket remover, a plastic scraping tool and metal surface prep. Follow the directions on the packaging.
    NOTE
    If the oil pan is not secured within 4 minutes, the sealant must be removed and the sealing areas cleaned. To clean the sealing area, use silicone gasket remover and metal surface prep. Follow the directions on the packaging. Failure to follow this procedure can cause future oil leakage.
  2. Apply silicone gasket and sealant to the oil pan sealing areas shown and install the oil pan rear seal.
  3. Apply silicone gasket and sealant to the rear main bearing cap.
  4. Install the oil pan rear seal.
  5. Apply a bead of silicone gasket and sealant to the oil pan mating surface.
  6. Position the oil pan and install the bolts. Tighten the bolts in the sequence shown. Tighten to 10 Nm (89 inch lbs.).
  7. Install the 3 oil pan-to-transmission bolts. Tighten to 34 Nm (25 ft. lbs).
  8. Install the starter.
  9. Position the crossmember and install the 4 bolts. Tighten to 90 Nm (66 ft. lbs.).

change-out-oil-pan-v0gljzlk4qz3gwg3khr1r5p1-2-0.gif

Feb 15, 2016 | Cars & Trucks

2 Answers

How to fix a new toilet flange so it will not leaked down onto the drain pipe


Hi Connie.

Hoping I'm visualizing this properly. The stand pipe under the house is generally pointing upward and has a flange on it. The toilet will have an indent on the bottom that is somewhat larger that the flange diameter. Then there will be a wax ring that is seated around the neck of the flange right before the toilet is placed down on top of it. The general process is that a new wax ring is placed, the toilet is lifted and, as carefully as possible, lowered straight down over the floor bolts. Once it makes contact on the floor, the toilet is gently rotated a small bit clockwise and counterclockwise to make sure that there is a good solid contact with the wax. The toilet is set square to the wall and, hopefully, with the floor bolts centered on the slots. Someone sits down carefully on the toilet to put pressure on the wax and seal it (this should not be done on a cold day, as the wax may not flow, and may even crack and leave a gap).

From what I saw you write, my questions would be whether the wax gasket was installed. if not, pull the toilet, obtain a gasket, and try again. if one was installed, were the remains of the old gasket thoroughly cleaned away from flange and toilet bottom? if not, the old wax may have cause uneven flow/sealing with the new ring (too much wax in the space).

You can also check that the leak isn't coming from higher up, like at the join from bowl to tank. If it's leaking there, depending on your toilet model, it might leak once the flapper is lifted in the tank, flow down the back outside of the toilet, and down under the house. In that case, it could be a bad seal, or the tank-to-toilet bolts not having been tightened.

Hoping this gives you some ideas

D

Dec 01, 2015 | Home

1 Answer

How to fit seal on fluidmaster flush valve


before you replace the seal: inspect the bottom seal by running your finger around and inside the rim. not likely but could be a burr. If the seal is OK, install a new flapper bulb. while the old one may look fine, the rubber may have hardened and thus will no longer seal properly. It's an easy fix, just be sure to get the correct replacement bulb. AND/OR, buy some silicon plumber's grease. A small container costs $3 or so. Spread the grease on the bulb and the seal-rim; where the two pieces meet to form the seal. Should provide a better seal.

Jul 05, 2014 | Plumbing

1 Answer

Need to know how to remove oil pan with engine still in vehicle on 96 Ford Wind Star 3.8 engine. What will I have to remove to get access to it.


3.8L Engine Fig. 2: Oil pan assembly - 3.8L engine 89693g43.gif
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle safely.
  3. Drain and recycle the engine oil.
  4. Remove the oil filter.
  5. Remove the dual converter Y-pipe assembly.
  6. Remove the starter motor.
  7. Remove the engine rear plate/converter housing cover.
  8. Remove the retaining bolts and remove the oil pan. To install:
  9. Clean the gasket mating surfaces thoroughly.
  10. Trial fit oil pan to cylinder block. Ensure that enough clearance has been provided to allow the oil pan to be installed without sealant being scraped off when pan is positioned under the engine.
  11. Apply a bead of silicone sealer to the oil pan flange. Also apply a bead of sealer to the front cover/cylinder block joint and fill the grooves on both sides of the rear main seal cap. NOTE: When using silicone rubber sealer, assembly must occur within 15 minutes after sealer application. After this time, the sealer may start to harden and its sealing effectiveness may be reduced.
  12. Install the oil pan and secure to the block with the attaching screws. Tighten the screws to 80-106 inch lbs. (9-12 Nm).
  13. Install a new oil filter.
  14. Install the engine rear plate/converter housing cover.
  15. Install the starter motor.
  16. Install the Y-pipe converter assembly.
  17. Lower the vehicle.
  18. Fill the engine with oil.
  19. Connect the negative battery cable.
  20. Start the engine and check for leaks. prev.gif next.gif

Oct 15, 2010 | 1996 Ford Windstar

1 Answer

Continually pumps


Probably the waste pipe blocked, it should have a rubber join that has worm screw clips securing it, I connect a hose to the"up" pipe and flush the blockage out.

Dec 19, 2009 | Saniflo & Saniplus& Macerator Pump

3 Answers

Water leaking through the seals on my 93 mx5, what


buy and install new seals ar try and see if window is adustablie

Sep 07, 2009 | 1993 Mazda MX-5

1 Answer

My master bathtub is leaking


Yes the weight of someone in the tub plus the water can push the tub down far enough to cause the leak.
Unscrew the flange in the tub that holds the drain to the tub. Get some plumbers putty and make a bead to fit between the tub and flange.
Make sure the rubber gasket is clean ..use a bit of plumber's putty on this as well. Get an assistant to stand in the tub while you snug things up.
Snug it up tight.... replace if the threads are stripped as you said.
Plus if your house is less than a year old, I'd talk to the contractor/builder if possible about warranty work...most reputable builders will cover their work for the first year.

Jun 22, 2009 | Lefroy Brooks Bath Waste Trap for Exposed...

2 Answers

Waste trap under bath leaks


put the putty under the flange where it makes contact with the inside of the bath, push the flange to the bath & tighten nut underneath. Trim off excess. Have an overflow pipe [not intergral] make sure the top & bottom of the collar have rubber seals
If the whole lot is plastic there may well be a leak down & along the thread of the waste.[it comes from the o/flow pipe collar] Silicone the thread and tighten nut. make sure it's dry first - silicone & water do not make a happy couple

Jan 26, 2009 | Lefroy Brooks Bath Waste Trap for Exposed...

Not finding what you are looking for?
Saniflo SaniPlus-Round SaniPlus Macerator Toilet with Round Bowl Logo

Related Topics:

411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saniflo Home Experts

Brad Brown

Level 3 Expert

15212 Answers

paulcarew

Level 3 Expert

2398 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Saniflo Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...