Question about RCA P61930BL 61" Rear Projection Television

1 Answer

Convergence problems, can't find any access to adjust via menus.

The main problem is the convergence, colours not lining up. I tried with the remote main menu and nothing, I also accessed the service menu by holding down the menu button and pressing power, still nothing to adjust the colours. There is a jumper connection on the PC board that is in the normal position and a space beside it that reads "test" the projuction bulbs have a sliding adjustment on each them, do I adjust it from that?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

NO !! You can't adjust that out. You have a convergence failure. You need to take it to a shop. You won't be able to fix it yourself. The more you adjust it the more ANY shop is going to charge you to fix it. Let me know how it turns out.

Posted on Oct 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red picture tube out of alingment how do you make major adjustment


Its done with the original remote--convergence in the customer menu should be looked at first---call up the crosses or the grid of lines, it has one or the other.

You first want to look to see if red out and then if it will move both up/down and left right where off.

If it will not move in some direction anywhere on the screen the convergence output chips the set uses are bad.

The set will or should have two hidden menus, one will bring up the advanced grid for convergence---input for that with the remote is Mute, 181 or 183----if you call up the wrong one shut set off and try the other number.

It is possible to converge the whole screen there, if memory serves me 7,8,9 change the color being adjusted DO NOT ADJUST GREEN FOR ANY REASON.

two buttons (different on different remotes will move the cursor around the grid (and the remote must have a button somewhere on it with "data" to save the adjustments.

Check in customer menu the convergence first---got movement?

Dec 08, 2012 | Samsung HLP5685W 56" Rear Projection...

1 Answer

Audio but only black screen for video on WS65807


First, the set has a hard reset but it will NOT affect convergence which is stored in a separate area of the set.

Model indicated has 3 hidden menus---all accessed with the Original remote and a 4 digit code.

At your own risk:

This is a V17 chassis that was used in 8 models.

It has 3 hidden tech menus: With set on:

Option menu is 8270 enter---The Option menu reset will return all settings to factory and also will clear any glitches out of the way--it as stated can cause Convergence not to be affected.

Circuit adjust menu: (stay out as one wrong move and fatal things can happen is : 8257 enter.

Convergence adjust menu: (better than customer and SAVES adjustments made in to the DCU or digital convergence unit in the set.

I STRONGLY SUGGEST YOU TRY THE OPTION MENU FIRST, IF NEED DETAILED INSTRUCTIONS I CAN LOCATE THEM FOR STEP BY STEP OF THAT.

SEE IF IT CLEARS THE MAIN ISSUES UP FIRST---IF YOU TRIED TO ADJUST CONVERGENCE IT MAY NOW BE MESSED UP BUT UNLESS YOU GET THE SET BACK TO WORKING SOMEWHAT NORMAL NOTHING TO WORRY ABOUT.

keep in mind I do this here for free and have worked on hundreds of these Mitsubishi sets.

SD TECH------ASK BEFORE YOU LEAP!

Dec 02, 2012 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Resetting eeprom


These sets including this one have 3 hidden menus---OPTION menu which allows a hard reset of everything except the convergence, Adjustment menu--be careful in there, and Convergence menu which adjusts better than customer one and saves better.

Each is accessed with a four number code using the Mitsubishi remote.

I have a list of most of the codes available.

Nov 07, 2012 | Mitsubishi Projection Televisions

1 Answer

How do i reset my mitsubishi television model#ws-55511


First a reset may not help unless I know what your problem is.

If model listed (WS-55511) IS CORRECT: set has 3 hidden menus:

Option Menu (hard reset of all settings to factory)
Technical Menu (Adjustments for various things)
Convergence Menu for adjusting convergence.

THESE ARE NOT ACCESSED FROM CUSTOMER MENU. Each requires Mitsubishi remote and a 4 digit code .......

So, What is your issue with the set?


I have the codes but it depends on model number and what problem with set is, reset is in Option menu but will not cure all problems.


SD TECH

Nov 10, 2011 | Mitsubishi WS-55511 55" Rear Projection...

2 Answers

Hitachi 43fwx20b Convergence Problems


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

Convergence problems are very common on all Projection TV sets including Sony,Samsung, JVC, Philip Magnavox, Panasonic, Akai, Pioneer, Hitachi, Zenith, and others. You can get a convergenece repair kit wiith instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms
  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted or warped
  • No Audio/Video - makes a chirping sound.
Problem #2

Another common problem is dull or washed out video.
Your TV may have one or more of the following symptoms....
  • Dull looking picture
  • White looking picture
  • Halos around objects
  • Red/Orange looking picture

You can see some more examples and find a fix here
bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Feb 25, 2010 | Hitachi 43FWX20B 43" Rear Projection...

1 Answer

Alignment Issue with model 53SDXBA Magic Focus doesn't correct.


A little hard to explain:there is a small micro switch on the front of the main circuit board(very small and usually button on it is blue) this will take the set into the CONVERGENCE MODE---DEPENDING on the number on the remote(CLU5722tsi etc) different buttons on the remote are then used to navigate and to adjust convergence; some buttons will allow you to change from red to blue; others will change the grid that will appear when you engage the micro-switch from fine to coarse---this set should have a remote with clu-615mp marked on the outside of it. If you need full information I can provide a detailed copy of instructions via email for this set and this remote-----after all convergence is aligned you have to use the remote to SAVE the adjustments---if you think this is beyond you---get a tech to do it---these sets are easy to align for convergence(presume you do not have a convergence problem) and it is easy to do after you know how. etower.766@netzero.net

Jul 18, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

I need the convergence code or how to get into the menu to converge my rca p52939 colours are not aligned


Hello,On your remote click the menu button and then go to the screen adjustment section. Once there chose convergence, and use the simple cross pattern to try to adjust your settings. If this does not work then you may have a convergence amplifier problem. For that you will have to have the convergence ICs replaced. I would suggest that you get a qualified TV repair man to do this for a fee. There are many instructions on how to do this on-line.I hope this helps,Regards,Shuttle83http://www.electron-age-technologies-llc.com

Jun 09, 2009 | RCA P52939 52" Rear Projection Television

1 Answer

Toshiba v43j22p 42" red shadows and lines over screen


6b5ee7e.png You may have a convergence problem. Here are some of the most common symptoms.

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.


You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kits for most models. If you don't see a kit for your set send them a quick email and they will put one together for you. Their kits includes photo instruction guides, original Sanyo STK chips, convergence resistors, pico fuses, etc.

Feb 02, 2009 | Toshiba 57H81 57" Rear Projection...

2 Answers

Colour problem


6b5ee7e.png You may have a convergence problem. Here are some of the most common symptoms.

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.


You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kits for most models. If you don't see a kit for your set send them a quick email and they will put one together for you. Their kits includes photo instruction guides, original Sanyo STK chips, convergence resistors, pico fuses, etc.

Dec 31, 2008 | Toshiba 42H81 42" Rear Projection...

1 Answer

Convergence issue


try fixing the convergence 2 after your've aligned the convergence 1 - the second (accessed via the set up control) let's you adjust on 9 different axis to align the red and blue tubes to the green. you select which + sign you want to adust by pressing the corresponding number for the + ie 1 for the top left, and 9 for the lower right corner.

good luck (note - you cant change the green only the red and blue, if the whole edge is a mess try moving the image (you need to be in zoom mode, and then access the position adjustment via the pitcure set up screen.

Nov 05, 2008 | Panasonic PT-47WX49 47" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...