Question about Braun SI6285 Iron

1 Answer

Autoshut off red light keeps flashing

My iron is less than 2 years old (Braun Si6285). After I plug in the power for less than one minute with the iron is in stand up position. The auto-shutoff red light keeps flashing and the iron does not get hot. Even I tried to move the iron or unplug and replug the power few times. I think may be the "Moving sensor" module is bad.
I do not know how to get the part or fix it. Need help.
Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 5 Answers

I had the same problem and eventually removed the tilt sensor. This is the molded board that you see when you open the back of the iron. By removing it, you will also loose the timer off function. The thermostat will still be operational.

Posted on Jun 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Iron heating sporadically and sensor lights working sporadically


It looks like the cord has a loose connection and will need to be replace.

Mar 29, 2008 | Rowenta DZ9080 Iron with Auto Shut-off

1 Answer

Iron heating sporadically and sensor lights working sporadically


sounds like a loose connection in the power transfer, some piece of metal may be broken or the cord itself may be damaged in some place, you could try replacing the cord. I would just go and buy a new iron. They aren't all that expensive anymore. Good luck with whatever you decide to do. I hope you solve your problem. If you want any further help or have any other questions, please let me know, otherwise have a Good Day.

Mar 29, 2008 | Rowenta DZ9080 Iron with Auto Shut-off

2 Answers

Philips 8300 steam generator iron keeps cutting out


I have this iron about 2,5 years, work a few times. when i shut down the steam generator the iron stays on. And now in one hour of work it shuts downs about 4 times. the lights on the steam generator are week. what main board i shuld switch?

Mar 21, 2013 | Irons

1 Answer

My rowenta iron which is about 4-5 years old starts blinking the red on-off button after only 2-3 minutes of use. Also the orange button will not stay lit. What is the problem? The red on-off button does...


your iron has a thermostat fault its this thermostat thats cutting in and out that puts the red light on it could be fixed but that wont be a cheap fix best bet is to buy a new iron as that would work out cheaper

Sep 11, 2010 | Rowenta DX6700 Iron

1 Answer

Power Light goes on but iron will not heat


If it is more than 3 years old (no warranty) then you can get it repaired or replaced. The heating coil is broken. The heating coil in the iron cannot be fixed, but must be replaced.

If the iron is less than 3 years old, you can get it repaired under warranty; however, shipping and other costs may not be worth having it repaired. (More than $30).
If you can get an estimate, you might want to have it repaired.

My recommendation? Replace it.

Sep 03, 2009 | Rowenta Irons

1 Answer

My iron worked perfectly and suddenly started beeping and all of the lights went out and it no longer heats up. It is only 2 years old with not much use.


Try wiggling cable at plug and then at iron side if light flashes you have a broken wire.

Tick box if helped

Sep 02, 2009 | Irons

1 Answer

Broun iron (model SI6285) quit working


Small appliances nowadays aren't really designed to be taken apart. Most likely there wont be replacement parts, you are probably better off just buying a new one.

Jun 06, 2009 | Braun SI6285 Iron

1 Answer

Red light flashing


Blinking red light is a standby phase, its not going to get hot like this. Shake it or just start ironing, the red light will go solid and the plate will heat up. The red light will go off when the plate is hot enough. It will go on again (solid) after a few minutes to keep the plate at the right temperature. If you leave it standing around for a while it will begin blinking again (standby).

These irons are known for malfunctioning though, mine stays in standby and the plate never heats up! Hopefully yours is fine.

Feb 07, 2008 | Braun SI6225 Iron

Not finding what you are looking for?
Braun SI6285 Iron Logo

Related Topics:

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Braun Irons Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

kakima

Level 3 Expert

98914 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you a Braun Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...