Question about Computers & Internet

2 Answers

I keep getting a Printer Error 110 and my WP documents won't print. I have rebooted and can't figure out what to do. Have downloaded 2 fix problems but they want $$ to fix.

Posted by on

  • Jeff Strader
    Jeff Strader May 11, 2010

    please include your make and model number of the printer and which operating system is installed on the computer.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 52 Answers

Did you get walked through the checking of the ports and properties?
there are a lot of steps to correcting the problem which takes time..this is why the charge the $$$
it would take a few pages of what to do first and next and next and next to get to the root of your problem.
the best way, and fastest is to uninstall the printer and reinstall it or restore your computer to the time before the problem started.
I would try restore first. A printer file may have been lost or corrupted. go to start on the bottom of the page. select all programs, then accessories, then systen tool,then system restore. select a date before the problem started. click ok and let it run. just follow the instruction from there.
if this doesn't correct the problem uninstall the printer and reinstall it..if you do NOT have an installation disk you will have to go to to EPSON website and download the program from there,

Posted on Oct 14, 2008

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 34 Answers

Hi rj, try updating your printer drivers:

Create a new folder on your desktop and name it newhpdrivers(substitute your manufacturer in new name). Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop. Power down your computer. Reconnect the printer to the computer and turn printer on. Power on pc. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done


ttt

Posted on Oct 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In WP my print button is not highlighted so I can print a document. Can anyone help?


This sounds like a driver problem.
I suggest you disconnect your printer from the system, delete it from the Control Panel, restart the computer, turn on the printer, then connect it (USB?) to the computer.
Win should recognize that 'new' device and locate the right driver for it.

If it fails to do this, you should try downloading a new driver from the Net for Win 7 and whatever printer brand/model you have.

If the driver is not able to self-install, you will have to go back to the Control Panel and take the 'Add new device' path.

Good luck-

Oct 14, 2014 | Microsoft Computers & Internet

1 Answer

Printer keeps saying busy printing another document


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer (if USB connected)> reboot your pc > unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer (if USB connected). Then try to print again once the computer fully recognizes the USB connection or when the WiFi light on the printer turns solid green (if WiFi connected.).


If that doesn't help, try the steps below:

  1. Disconnect the USB cable connecting the printer from your computer.
  2. On your computer, go to Control Panel > Printers and Faxes.
  3. Delete the Lexmark print object.
  4. Reboot computer.
  5. Re-brick your printer by pulling out the power supply - black box where the power cord is plugged into on the back of the printer, and re-plug after 30 seconds.
  6. When the printer turns on, reconnect it to the computer.
  7. Wait until your computer fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, try to print a document to verify that the problem is fixed.

Feb 10, 2012 | Lexmark X4580 InkJet Printer

1 Answer

My printer will not print


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print a document again to verify that the problem is fixed.


You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/aNGYmW. Select your operating system, download and execute the file. After the install process, try to print a document again to verify that the problem is fixed.

Oct 23, 2011 | Lexmark X2600 InkJet Printer

1 Answer

Lexmark x7550 won't communicate with computer to scan


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print a document again to verify that the problem is fixed.



You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/ngaKcu. Select your operating system, download and execute the file.

Oct 19, 2011 | Lexmark X7550 InkJet Printer

1 Answer

Cant download update driver for X3580 error message 1001


Try removing the command to startup the lexmark printer monitor from the startup file. Just run "msconfig" and uncheck the command. Then reboot and try the update again.

Jun 20, 2009 | Lexmark Office Equipment & Supplies

1 Answer

"Document Failed to Print" - printer is "receiving data" but nothing ever comes out


Have you tried restoring to a previously known date that all worked well?

Go into System Restore and try there.

Sep 22, 2008 | Brother MFC 7420 All-In-One Laser Printer

1 Answer

Printer won't print word perfect doucments


try a different pint driver such as a pcl4or5e.

Apr 15, 2017 | Office Equipment & Supplies

5 Answers

Printing problem "PCL XL error"


Dear Sir

My printer is laserjet 1320

PCL XL error
Subsystem: KERNEL
Error: Illegal Tag
Operator: 0x1b
Position: 6




Pls. This problem solution give me.

May 29, 2008 | HP LaserJet 1320n Printer

7 Answers

Printing problem "PCL XL error"


PCL XL ERROR subsystem: Kernel Error: Illegal Tag Operator :0 x 1b Position: 6

Apr 12, 2008 | HP LaserJet 3030 All-In-One Printer

3 Answers

"please insert card'


reboot pc and unplug printer

Nov 13, 2007 | HP Photosmart 8250 InkJet Printer

Not finding what you are looking for?

Open Questions:

Computers & Internet Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...