Question about Home Security

1 Answer

SCC-343P Security camera cant get video out

I bought a samsung SCC-343P cctv camera, however i cannot get any sort of video out of it.

When i have applied 24v to it, the power light comes on and i have plugged the bnc video output into it however the screen is still black.

There is a little 4 pin socket on the back labeled "adj" which i wondered if was a RJ11E output (though it doesnt look the same) either way i havent got the manual with this camera and have no idea if i have to press certain buttons or something to switch between outputs?

can you assist at all?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 423 Answers

I would check the iris on the camera, if it's all the way open, then it's probably not the fault of the camera. What are you using to view the image?

Rob

Posted on Mar 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE 3 DVR SAMSUNG WITH 16 CCTV CAMERAS IN EACH DVR I NEED TOKNOW HOW TO OPERATE DVR SAMSUNG


If this is at your workplace I really think you need to go through your IT & security specialists.

Jul 09, 2015 | Samsung Cameras

1 Answer

Close circuit TV


Have you got the user manual ?
http://www.samsungcctv.pl/instrukcja/00769B_SHR-8162_ENG-NEW-0105-web.BM%281%29.pdf
Have you connected a monitor to the DVD device ?
Single mode would stop video from rotating through each camera

Jan 11, 2015 | Samsung CCTV-GVI SECURITY SHR-8162-1T 16CH...

1 Answer

I need to replace a Samsung SCC-641 can't seen to find any online.


I have two non working cameras with working power control plates if you are interested. Contact pbyer14@gmail.com

Jul 19, 2010 | Samsung Power Supply, Control Plate for ...

2 Answers

I am looking for a Network Workstation with all accessories needed for Video Mangement System for CCTV camera Video Surveillance


Hi,

Go to cctv Video Guard
These guys have great deals. Talk to the person on the website. They are there 24x7. They will give discounts on older models, help you plan and ship within 2 working days.
In case you need real security Guards to watch the cctv 24x7 over the internet for $1/day goto sms Video Guard

Cheers
TeaCii

Mar 14, 2010 | LaCie Ethernet Disk (301298U) 2000 GB...

1 Answer

1fps vs the claimed 30fps


Hi,

Look at the admin settings. Normally you have to specify at what you want to record, irrespective of what the cameras can do. Actually each camera should be able to do 30fps

Check out better hardware if you need it here.

Cheers
TeaCii
Own website? Improve it.
Own cctv? Let real security guard watch it for $1

Feb 26, 2010 | MicroPac Technologies MicroPac USBDVR4 4...

2 Answers

No picture on my tv from cctv camera


it is neither clear what sort of output your cctv cameras produce, nor what sort of input your dvr accepts. but, for the most part, dvrs record digital tv signals, whereas cctv cameras output analogue signals. so, even though you may be able to plug a cctv camera "straight" into a tv via a scart connector, it is unlikely that any scart connectors on a dvr have the necessary circuitry to accept such signals.

May 24, 2009 | Sharp Cameras

2 Answers

I bought a CCTV system for a school but I have some electric problem that the image looks like it's flashing? what is the problem since Iam new to this. IT's like it has brightness


Line loss from the camera to the DVR or monitor and ground loops are the most common problems. If you only see black and white from a color camera, it typically means the cable from the camera to the DVR is too long and/or has high loss caused by a poor BNC connector.

Excessive brightness can mean the video signal from the camera is too strong. This can be caused by an impedance mismatch from using the wrong type of video coax (cabling).

Additionally, a camera power supply plugged into a different electrical circuit (not the same outlet as the DVR or montior) can cause ground loop problems that can affect the video quality.

Dec 14, 2008 | Samsung Color Fixed Security Camera...

1 Answer

Matsui m19lid618


A regular TV will not display a CCTV camera, because the CCTV outputs a 1 Volt peak-to-peak RF signal. A TV uses a broadcast signal, it is different. However, if the TV has a yellow "video in" jack on the back of the set, this will display the camera, as the yellow video in will process and display the CCTV signal on the TV. Let me know if this does not work.

steven.burman@commandtechnologyassociates.com

Dec 05, 2008 | Home Security

Not finding what you are looking for?
Home Security Logo

Related Topics:

468 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Security Experts

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

15024 Answers

yadayada
yadayada

Level 3 Expert

69199 Answers

Are you a Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...