Question about Sharp VC-A410U VCR

1 Answer

Sharp VCR vc-a41 tuning to TV

Hi, Have just moved to a new town and had to retune my TV (which is all working) but have been unable to tune my VCR (can't find the manual).

Can anyone tell me what I need to do to tune my VCR?? I have tuned a TV channel for the VCR (so that is all good) it is just the actual VCR that I need help with.

Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,285 Answers

Do you have cable? if yes both tv and vcr should be on ch #3 (to record).......ok no cable you are already set up look at tv right....just need to record..you need your vcr remote.....turn on vcr...press the menu...go to ch settings..auto scan will look for and lock in your channels...also make sure the air/cable selection is on air (unless connected to cable)....hope this helpful....feel free to rate

Posted on Jul 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Auto tuning digital tv lcd Sharp LC-32LE345X


Maybe your Sharp TV wants you to go back to setup and go through the whole routine again.

Nov 21, 2013 | Sharp Televison & Video

1 Answer

Would like to tape from tv.


this should help jar your memory some....if your vcr is set/tuned to ch 3...and tv is set to ch 3....cable/dish box is your ch selector (tune to any ch u wish) put a blank tape in press record if you want to record....(you are not home, you must set the timer on the vcr /menu/timer recording settings)...make sure the cable box is set to the ch you wish to record...or else you will miss your recording you want.

Jul 10, 2010 | Sharp VC-A582U VCR

1 Answer

Can not find my instructions book to turn my freeview tv into my video recorder


If the TV has a scart then you don't need to tune it. All you need do is connect a scart to the VCR and TV. Then when you want to record anything, set the VCR to an AV setting instead of channel 1 etc. You need to set it to the one with the scart, as the VCR will have more than one AV looking at it's picture. You then just press record. You won't be able to change channel, or the VCR will record that channel instead.
If this is a problem, get a freeview box and just have it connected direct to the VCR.
If the TV has only one scart, you can get one of these boxes below.

97c8177.jpg

Feb 09, 2010 | Sharp VC-H812U VCR

1 Answer

I have a Sharp VC-MA31 vhs recorder and I can not tune the channels of my t.v. into the VCR so I can not tape any channels.


you need to put the antenna cable to the vcr first then connect the vcr to the tv the tv gonna be on the 3 channel, and put on the vcr the channel you wanna record

Jul 07, 2009 | Televison & Video

1 Answer

Need to retune Sanyo VCR VHR-610.


On the Sanyo VHR-610 you start the TV auto tune by holding down both the CHANNEL ( +, - ) buttons on the VCR simultaneously for more than 2 seconds.
The TV stations in your area will be automatically preset in order starting from programme position number "01"

When all available stations have been preset, the function will stop and the TV station preset to programme position number "01" will be tuned on your TV screen.

In other words after holding down the two buttons, leave it alone for awhile (takes some time) till it ends back at 01.

Cheers

Apr 07, 2009 | Sanyo Televison & Video

1 Answer

No remote


Check e-bay for SHARP RRMCG1236AJSA TV/VCR REMOTE

There are some for under $10 total

Jun 15, 2008 | Sharp VC-A410U VCR

1 Answer

Tv/vdr/cable box


Your hookup is correct- Your VCR needs to be tuned to channel 3 or 4, to match the cable box.

Also, the VCR channel output needs to be matched to the TV. If VCR menu options are displayed on the TV then this part is right. If not, then set either the VCR or TV to the correct channel.

May 11, 2008 | Sharp VC-A420U VHS VCR

1 Answer

Grundig TV - Tuning DVD & VCR


Hi there!
If the DVD recorder has an RF out then you should be able to tune it on UHF bandwidth. The cable should run from the RF Out on the recorder to RF on the TV. Switch the recorder on, put in a DVD and press play before tuning. Some DVD's require a disc before a Menu appears. Good Luck, Regards, JUS004

Mar 23, 2008 | Grundig GF70-600 TV

1 Answer

TV, freeview, DVD and video set up.


Hi.
Modern day freeview boxes rarely have A modulator in them so you can not tune it to a channel on your tv it must be connected using scart lead.
Most freeview boxes have 2 scart sockets one for VCR & one for TV plug your scart leads in to the scart sockets of freeview they will be labled TV & VCR.
The scart labled TV goes to scart socket on the TV labled AV1 or 1
The scart labled VCR goes to scart socket on VCR labled AV or IN
Now the aerial leads From wall socket to ANT in on freeview.
Then from RF out on freeview to ANT in on VCR.
Then RF out on VCR to ANT in on TV doing this will enable you to put TV on 9 to watch tapes.

The final scart will be from DVD to TV socket marked AV2

You will need to put TV on AV channel to view freeview.
To record freeview you must put VCR to EITHER line.av,aux. it will be one of those different manufacturers call them by varying names.
I have done this banking on your tv having 2 scart sockets if it only has 1 let me know & I will tell you how to wire it differently.
Please state make & model of TV set & VCR & what connections are available EG scart, Phono, Svhs etc.

http://dysonmanuals.llc.nu/

Chris..
0d03403.jpg

Jan 20, 2008 | Televison & Video

2 Answers

Tuning a Funai 31B-250 VCR to a Wharfedale L22T11W-A LCD TV


i have a wharfdale L22T11W-A LCD TV. have got sound but no picture, any ideas?

Dec 22, 2007 | Televison & Video

Not finding what you are looking for?
Sharp VC-A410U VCR Logo

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...