Question about Whirlpool Ultimate Care II LSQ9564J Top Load Washer

1 Answer

Whirlpool ultimate care II will not spin

Washer is full of water and will not spin. I hear the lid switch clicking. When I start it on spin cycle I hear a hum, the tub moves a couple of inches and then stops...shortly after it shuts off.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

You said,washer is full of water and will not spin. You hear the lid switch clicking. When you start it on spin cycle and hear a hum, the tub moves a couple of inches and then stops...shortly after it shuts off.


Some reasons this may happen
Washer won’t drain or spin
n
1. Is the drain hose clogged, or the end of the drain hose
more than 72 inches (183 cm) above the floor?
2. Is the lid open? ............Also the lid switch can be faulty!!
The lid must be closed during operation.
3. Is there excessive sudsing?
Always measure detergent. Follow manufacturer’s directions.
4 If you have very soft water, you might need to use less
detergent.

Sounds to me like the lid switch can be faulty!!Then it acts like the lid is open.
Huuum

Posted on Oct 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Ultimate Care II Washer will not drain


bad lid switch,open the lid a few inches and close it down,if you do this a few times and don't hear a clicking sound the switch is bad.
http://www.youtube.com/watch?v=PZAbg9uftos

Jun 05, 2012 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

My washer is not spinning on the spin cycle...what should I do?


If the lid switch is defective, your washer can't spin and may not function at all. You should hear a click from the switch when you open or close the lid.

Nov 23, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

The spin cycle does not consistently start.


sounds like you may have abad lid switch, not always making contact to tel the unit the lid is closed therefore for safety resons the machine will not spn/ and or drain water.. does it seem to start when you lift and drop the lid assy after checking? you oshould hear a "click" indicating the switch is been made

Apr 23, 2010 | Whirlpool Ultimate Care II GSW9650LW Top...

1 Answer

Our ultimate care ii is not working properly. it


the lid switch is broken,open and close the lid if you don't hear a click that's a sure sign the lid switch is broke,try sticking a pen or something in where the switch is you might get it to spin and drain but you gotta change out the lid switch

Feb 17, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer will work on rinse, then stops, won't drain or spin.


most likely the lid switch is faulty .there is a tab on the washer lid that lines up with the lid switch make sure it is lined up and switch is depressed . should hear a click ,if not replace switch.

Sep 08, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool washer ultimate care II sometimes does not spin.


HI It sounds like the spin basket drive is going bad. If it was the lid switch, you would get no sound. Let me know if I can assist you further.

Thanks
Vic

May 16, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Ultimate Care II - Rinse Cycle does not start


sounds like a lid switch problem. is there a clicking noise when you open and close the lid?
if not then the lid switch may need to be replaced; inexpensive.
this could also be caused by a bad timer.
also try a different speed for the rinse cycle, it may be a bad motor and it is not going into a certain speed. instead of gentle or slow speed try fast or normal, something like that.

Jun 28, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Washer won't start spin cycle


sounds like a lid assy issue, can you hear a "clicking" just before the lid is closed, try opening nad closing a few times listening for a distinct "click" if not the machine doesnt think the door is closed and for safety reasons wont spin and drain.

Mar 16, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9564J Top Load Washer Logo

624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...