Question about Computer Processors

2 Answers

Gateway Model GT5228

My gatewaywas crashing ever once and awhile. The LCD display would break up like glass schattering then it would go dead.

I would have to unplug the power cord for about a minute and it would boot up.

Finally it just would recover. It dead - it powers up but not video, the fans run in the high mode but I don't even get the gateway logo.

ANy suggestions?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

HI I HAVE BEEN HAVING SOME MONITOR ISSUES WITH MY GATEWAY IT ACTUALLY RTGE COLORR SEEMS TO GO AND COME BACK RAMDOMLY,BEFORE IT HAPPENED EVRY ONCED IN WHILE AND NOW ITS JUST STAYS THE SAME ALL THE TIME I AM ABLE TO SEE EVERYTHING JUST THE COLOR GOES AWAY THE RED OR PINKS TURN TO BLUE !!! AND IS REALLY ANOYING ANY SUGGESTIONS>>>??MY EMAIL IS ELECTROID7@GMAIL.COM

Posted on Nov 03, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 45 Answers

It appears that you overheated your video card quite a few times. This can be caused by poor ventilation, a bad heatsink or just a bad video card. In any case, your solution is to replace the video card with a new unit.

Posted on Oct 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lamps went out, can tell display is working


i think its a led backlit monitor. anyway in my experience is one or more capacitor to be replaced. you can find them by checkin the capacitor top; the damaged one have a "fatty top" lookin. http://en.wikipedia.org/wiki/Capacitor_plague. hope it help bye

Nov 29, 2013 | Gateway Zx4800-02 20" Hd Mulititouch...

1 Answer

I think that the wire that connects my LCD to the computer is broken. I cracked my lcd screen so I bought a new one and installed it. The lcd screen worked for about a day and then when i closed the cover...


you have two problem!to see something on a lcd you must have a good inverter or if is led one of them(led) is dead!!!that cable you mentioned "put the pixels on the screen" sort to speak!put uv led flashlight above the lcd very close and try to see if on lcd appear something if yes you have the inverter or one led dead

Aug 18, 2013 | Acer Aspire 5750g-6653 - Core I5 2.4 Ghz -...

1 Answer

My new AMD Athlon II Quad 640 3g Crashes. It crashes almost once a day. All temps seem ok. the setup display says that it suffering fron power surge the cause. I have put a power surge device in the mains....


You might not have your voltage set properly in your bios and/or your power supply is either insufficient or going bad on you. Have someone test all the leads and be sure the voltage produced is as it should be. Also evaluate your system as a whole and compare the wattage -vs- the power supply you have. (i.e. running a powered vid card.. tv tuner.. two hard drives.. extra ram AND a beefy cpu on a 150watt supply is highly unlikely.)

Apr 12, 2011 | Advance AMD Athlon II X4 640 3 GHz...

1 Answer

Gateway pentium 3 boots to where it displays cdrom drive infromation then it pops up a blue window asking for a pass code. What is the code it requests or cause of problem?


Sounds like a bios password thats only thing it can be pre-boot screen. If its a desktop you can dislodge the bios battery for about 3 minutes if its a laptop your kinda screwed. If you can prove ownership of the laptop then maybe Gateway has a master password work around.

Jan 04, 2011 | Gateway Computer Processors

1 Answer

No display even after the system boots


You either have a dead CPU or a dead motherboard or a partially-dead power-supply -- the power-supply should supply different voltages to different computers, i.e., one voltage to spin fans, and a different voltage to power the RAM, and a different voltage to power the motherboard. So, it can be "partially" dead.

Borrow a power-supply, and try that first.
If all else fails, take the computer to a qualified technician.

May 31, 2010 | AMD Athlon 64 X2 3800+ Dual Core Processor...

1 Answer

Gateway gt5404 reads no bootable device pc seemed to siow down some then went black was after micro. soft update ? unpluged twice pulled batt. reconected it worked set clock back worked awhile went black...


Any hard disk that makes clicking or metallic noises is faulty, especially when POST error message no bootable devices detected.
To confirm go into the BIOS setting and see if the hard drive is detected, if it cannot detect the hard drive then it is definitely faulty.
Replace the hard drive and install Windows on the new hard drive to get the computer working again.

Jul 31, 2009 | Gateway Computer Processors

1 Answer

XP-Pro Crash


I don't know why but some systems which have XP (SP1 or SP2) simply can't take the upgrade to SP3. Your system appears to be one of them. For instance our family's computer had XP SP2 and upon upgrading to SP3 we received a fatal crash while XP was loading into normal operating mode.

I managed to resolve the issue by booting to safe mode and restoring the system to a date before I installed SP3. Sorry that the new SP doesn't work for you.

Feb 03, 2009 | Microsoft Computer Processors

1 Answer

GATEWAY GT5228


there is a basic guide i will give ya
1. not all parts are comptable so please check visually before trying to swap them

a. the large to med size board that everthing plugs into is the MOTHERBAORD or mobo for short
b. the cpu central processor unit (usually) is under a heat sink & fan upper left hand when looking at most (most) desktop mobos
c. the ram random access memory is usually to the right of that and may be sd ddr ddr2 depending on age of mobo
e. there should be cables going to the optical drive, cdrom, etc, hard drive or HDD for short wide usually gray is called ide or smal thin sata depends on the mobo
f. sometimes there are parts in the slots on the bottom left of the mobo (these can be anything from vidoe cards to modems to lans no way to tell without more info)

the first thing to look at if you are upgrading is the ram compatable take a tick out of the old unit you will see the catches make sure it is unpluged and you have touched the metal case before touching inside of computer static electrcity can damage a lot on a computer then take a stick out of this one do the slots or notches line up if so more than likley they are compaitble

next look at the cpu repmve the heat sink and fan carfully lift the cpu chip do not bend the pegs or its ruined look at the slotit came out of it will tell you mpg or pga 478 or socket a or socket 482 they would have to match to see if they were ubgradable.

like I said though depends on the age difference most are not that compatible even in the same brands.

Sep 10, 2008 | Computer Processors

2 Answers

Upgrade from 600 MHz to 1 GhZ


According to this review, you can upgrade as far as a 2 GHz P4-M at least; http://www.pcmag.com/article2/0,1895,669029,00.asp Other than that, i have been unable to find the details of your motherboard - if you can post the make and model (should be printed on it somewhere) then I would hope to find a more complete list of compatible and incompatible processors. Gateway themselves no longer offer online info or support for this model, but the motherboard details should enable me to find out what you need to know. Waiting for your post :)

Nov 04, 2006 | Gateway Pentium III , 600 MHz (1515824)...

Not finding what you are looking for?
Computer Processors Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Processors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you a Computer Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...