Question about Televison & Video

2 Answers

HOW DO I REPROGRAM MY NEXXTECH 4 IN 1 UNIVERSAL REMOTE CONTROL.......

I DON'T HAVE THE INSTRUCTIONS TO PROGRAM THE REMOTE FOR THE TV.
I CAN FIND THE CODE BY PRESSING 'P', TV AND PRESS POWER UNTIL THE TV SHUTS OFF, BUT THEN WHAT DO I DO.... I PRESS 'P' AGAIN AND IT DOESN'T WORK. THANK YOU FOR YOU HELP.

Posted by on

  • Anonymous Dec 13, 2008

    i have a 6 in 1 nexxtech universal remote control i need the code list for all t.v.'s.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Step 1: Click and hold "P" till red light remains on
Step 2: Click TV
Step 3: Click "Power" until TV shuts off
Step 4: Click "M" to save the setting
Step 5: Repeat steps 1 thru 4 on all devices

Posted on Dec 18, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

DO-NOT I REPEAT DO-NOT GET ONLINE HELP IT SUCKS!!!!!!!!!!!

Posted on Jan 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instructions to program ge universal to sanyo tv


1. Turn on your Sanyo TV

2. On remote, press and hold CODE SEARCH until indicator lights, then release

3. Press and release TV . Indicator will blink, then remain on

4. Press number buttons for 004. Indicator will turn off

5. Aim remote at TV and press ON-OFF button. TV should turn off

6. If not, repeat steps 2 through 4, pressing number buttons for 013, then repeat step 5

7. If no result, repeat steps 2 through 4, pressing number buttons for 049, 108, 110, 180, and 209 successively, and pressing the ON-OFF button each time

Feb 02, 2013 | GE Televison & Video

1 Answer

How do i programe my dish remote to my Sanyo tv and to my dish reciever


The Dish TV remote control allows you to program the TV, VCR and DVD codes so that all you need is one remote. Most TVs can be programmed into the remote using specific codes in the Dish TV remote manual. But if you don't have a manual or list of codes, you can program the remote manually.


Instructions 1. Using Programming Codes

Find the TV code for your TV in the list from the Platinum Remote Control User's Guide (See References). For example, if you have a Kenwood TV, the three possible codes to try are 506, 573 and 712.

Press the "TV" button on the remote. Hold down the button until the "Sat," "VCR" and "Aux" buttons light up. Release the "TV" button and it will be flashing.

Enter the first code using the keypad. If you want the remote to control all functions on the TV, enter the code and press the # key. The "TV" button will flash three times.

Press the power button to turn off the TV and turn it back on again. If the code was correct, the TV will turn off and on. If the TV doesn't power down or back on, follow Step 6.

Try the next code from the list. Follow Steps 2 through 4 using each code until one turns off the TV.
2. Programming Without Codes

Press the "TV" button on the remote. Hold down the button until the "Sat," "VCR" and "Aux" buttons light up. Release the "TV" button and it will be flashing.

Press and release the "Power" button on the remote.
Press the arrow up key and stop. If the TV doesn't turn off, press the arrow up key again. Continue pressing the arrow up key until the TV turns off. Do not go fast when moving through the codes or you could miss the correct code. Press the arrow key and wait at least 20 seconds to see if the code works before pressing the arrow key again.


Press the # button on the remote control when the TV turns off ot lock the code.
For codes and more details, Visit this site for more details. The site name is (Electro-help). Just type in "electronicshelponline.blogspot" into the search box of your browser, and click search. You can see a site by this name. Pull up older posts there. Sometimes, ads related to each post might give you details about the availability of spare parts and price. It is a blogspot site, in English Language

Jun 27, 2012 | Sanyo Televison & Video

1 Answer

I have a 21.0 IR/UHF PRO remote and I am trying to program it to operate my VR 517 Kenwood surround sound receiver. I would just like to find some codes to try or some directions for having the remote...


bigfootbuz

I have provided instructions on how to program the remote to other equipment. If you have any other questions, please don't hesitate to ask.

Address To Other Equipment Using Power Scan
  • Remote: All Remotes (except Basic)
    1. With the desired equipment on, press and hold the correct Mode button until all mode button back lights illuminate, then release.
    2. Press and release the Power button. AUX Mode: Before pressing and releasing the Power button
      • Press 0 for a TV
      • Press 1 for a VCR/DVD
      • Press 2 for any other device
      Then Press STAR (*)
    3. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
    4. Press the POUND (#) button. Note: If the code entered is valid for the remote, the mode light flashes three times.

Jun 24, 2011 | DISH Network IR Remote Control

1 Answer

Hello I have a universal remote control for tv sanyo but I lossing de manual instruction and Iand ree program my tv. only I need how cam progarm my remote control pleaswed thanks.


Here is the steps on how you can reprogram your RCA tv remote control:


1. Turn the television on by pressing the "Power" or "On" button that is located on the set.
2. Press and hold down the "Code Search" button located on the RCA TV remote. 3. Press the "TV" button on the RCA TV remote. Once you press this button, you can release the "Code Search" button
4. Start pressing the "On/Off" or "Power" button that is located on the RCA TV remote. Keep pressing the button until the television shuts off. 5. Press "Enter" on the RCA TV remote to save the code on the remote. The remote will then control the television.

Apr 07, 2011 | RCA Universal Remote Control

2 Answers

How do you program an RCA "RCR 615 DCM1" universal remote? Any instructions out there?


I know this is an old post, however if anyone else needs to know how to program the RCA RCR 615 DCM1 universal remote here is how: Turn on the device you wish to program, dold the device button you wish to program (tv, vcr, dvd, etc.) While holding the button with one hand, press and hold the power button with the other, hold both buttons until the device button lights up and stays on then release both buttons at once. Light should remain on. Point remote toward the device and press play button every 5 seconds until device shuts off. Once the device shuts off, with remote still pointed toward the device, slowly hit the reverse button (rewind button) until the device turns on again and then hit stop button. Now your device should be programmed. Repeat for each device. Hope this helps someone, because I had this problem myself and I played around with the remote until I figured it out . This may work for other RCA RCR----- remotes as well.

Apr 29, 2010 | RCA Universal Remote Control

1 Answer

I can't find the code for samsung t.v.


I would suggest trying the following steps:
1. Turn on the tv. On the remote control, press "tv" once. 2. Press and hold the "set" button until the red LED blinks twice, and then release "set." 3. Enter the digits (using the keypad on the remote) "9-9-1." The LED should blink twice. 4. Aim the remote at the tv and slowly alternate between pressing "power" and "tv." Stop when the tv shuts off. 5. When the tv turns off, press and hold "set" until the led blinks twice, then release the button.
This is to program the remote for your tv. If you want to program another device into the remote, use the same steps but, instead of pressing "tv," press the key corresponding to the device you want to control. I hope this helps! Sincerely, Der Strom

Apr 09, 2010 | One For All URC6011 Remote Control

2 Answers

Rcr311w need help and advice on programming


WHAT BRAND OF TV ARE YOU TRYING TO PROGRAM

Jun 03, 2009 | RCA Universal Remote Control

1 Answer

Rca remote


Finding a code for one TV could take a long time, here's what you do
1. Press the TV button once 2. Press and hold "Code Search" until it lights up 3. Point the remote at your TV with the TV on, and keep pressing the power button until the TV shuts off 4. Press the TV button once more.

Jan 21, 2009 | RCA Universal Remote Control

1 Answer

I have a phillips universal CL034 remote control and i dont know the code or how to program it to my television


without knowing the brand of the tv i have to give you generic instructions on how to program the remote without knowing the codes:

  1. Turn your tv on manually
  2. on the remote press TV once
  3. Press and hold the set button until the LED red light blinks twice, then release the set button
  4. enter 9-9-1. the led will blink twice
  5. aim the remote at the tv and slowly alternate between pressing POWER and TV. Stop when the TV turns off after pressing power.
  6. lock in the code by pressing and releasing the set button. the led will blink twice.

Jul 02, 2008 | Televison & Video

1 Answer

NEXXTECH 2 IN 1 BIG BUTTON Universal REMOTE CONTROL TV code for sansui tv


Have a solution for you.Turn your TV on then Press and hold 'P' on remote until light stays on. Press device to be controlled (TV/Cable) light will flicker but stay on. Now keep pressing channel up (up to 300 times) until device changes channel. Then press Enter to save code. Hope this helps

Jun 08, 2008 | Big Button TV Universal Remote

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

4,976 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74887 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5266 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...