Question about Televison & Video

1 Answer

Curtis mathes tv - model cm25020s

Tv shuts off, cable goes out. hit side of tv comes back on. it is the control board in back of tv that the cable and audio all hook up to. what is the part no. or where can i get replacement part. it is a small circiut board that controls picture pick up and sound. it will lose picture but not sound. part # may be aa64-00892y

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had the same problem if you have any skills with soldering open it up and check on the pins on the thing in the back lefthand corner. On mine the solder has a circular crack around one of the pins that when the back was on on it pushed the chip itself up and cause that one pin to not touch. The thing i refer to is the black tower that has 2 philip type "screw" that you turn to change the defalt color or somthing like it. well hope what i said help if you have not trashed it or got a new tv... or both.

Posted on Aug 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I reset the parental control on a curtis mathes model number cmc19101


Download the user manual to your TV from net. It will have all details. To download it, click here.
Actually Daewoo and Curtis Mathes TVs have same motherboards inside.

May 26, 2012 | Televison & Video

1 Answer

I have a curtis mathes model cmf2710s that lost all sound, with and without a control. help!!!!


First you do is to check the speaker if good or not.If the speaker is deffect replace it, and if the speaker is good the problem is in the sound amplifier that located in the board of your television.Maybe the sound output ic is deffective.Need for repair and troubleshoot by the authorized tv technician.

Jul 09, 2011 | Curtis-Mathis CM27101S TV

1 Answer

While moving my parent's Curtis Mathes Cm19001 TV produced in 1999, I touched the channel button which took the TV off of channel 3. We've tried to use the channel buttons to return to channel 3,...


I have one of this tv model too.Just used a RCA component cables like Y,R,W hook one side to the tv Video IN INPUT holes and the VCR the other end of the cable to VCR Video OUT INPUT holes.Now just pushes a channel manual button up or down a couples for the tv go into VIDEO Mode.Play the dvd player it will work.Or try Remotes.com to buy a tv original remote.Return the universal remote.

Jun 18, 2011 | Curtis-Mathis CM19011 TV

1 Answer

Need code for Cable remote to work tv


Try
http://www.remotes.com/

Thanks
Frank
Live-Tech
1-888-361-8511
http://www.mylive-tech.com.

May 15, 2010 | Curtis KCR2610 7 in. Portable Television

1 Answer

How do you reset your Curtis Mathes Tv after the


TIME TO GET OUT YOUR USER'S MANUAL AND YOUR REMOTE.IF YOU STILL HAVE A PROBLEM CALL A SERVICE TECH.

May 14, 2010 | Televison & Video

1 Answer

Need code to program Zenith remote control


Try these codes for your remote and TV. The are the Zenith codes for a Curtis Mathes TV.

CURTIS MATHES.....002 103
............................. 112 502 506
..................... 512 601 701 704

These should work.

Regards,

Mike

May 09, 2009 | Curtis-Mathis CM25011 25" TV

4 Answers

Curtis Mathes TV Remote Control Codes for Programming the remote to the TV


I own a One-for-All universal remote, and my booklet says the setup code for a Curtis Mathes TV (without a built-in DVD or VCR) is one of the following numbers: 0030, 0047, 0054, 0060, 0093, 0145, 0154, 0166, 0451, 0702. I can not guarantee these numbers will work with your remote, but it is worth a try.

Jul 03, 2008 | Curtis-Mathis CM32010 TV

1 Answer

Remote control codes for general instruments cable box


i have a curtis mathes tv called an itronics and i need a remote controll code for it

Jan 15, 2008 | Nikon MC-EU1 LCD Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...