Question about Konica Minolta magicolor 2400 Laser Printer

1 Answer

Using refill not intended for 2400W

Can I refill my 2400w with any other refill for another brand or type? What is the difference actually. What about the chip? i dont think we have that here in malaysia.. thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

You need to be careful about the size of the grains in the toner. I would use toners from other printers of the same make and model series, but when you go outside them you really need to know the exact natue (specifications) or the toner you use. The chips just reset the counter that the printer tracks to tell you when you are just about out, but they are not critical for operation, but you must set the print engine to continue on error.

Posted on Nov 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica Minolta 2400 laser printer has a slow, 52 times per minute, yellow lightning bolt flashing on its control panel on the front right of the machine. It seems to be locked up. It wont print or r


Sir bad idea to replace with partial one. Replace with OEM cart Brand New machine counts how many prints for several different parts in the machine when it reaches certain counts on certain part it wants NEW stuff.

Dec 18, 2014 | Konica Minolta Magicolor Model 2400w Color...

1 Answer

Minolta 2400W errors


GO and get 4 Konicminolta image units one for each color and replace them do not use third party. NEVER ever use a vacuum cleaner the static electricity can cause sensors to go bad !!!!!!!!!!!! might have destroyed the chips on the image units SO recommend get all new hopefully you did not destroy the control board with static electricity

Apr 27, 2010 | Minolta magicolor 2400W Laser Printer

1 Answer

The error light stays on


Hi

Try to open the blue cover and close it. Then press a few times the "rotate toner" button. After that powerswitch off and on, should run.
If it´s don´t worked, make sure you have every transport secure away from the cartridges.
The contact`s should be clean in Printer and on cartridges.
If still the same prob, start from first tip.
It´s worked by my 2400W feed new toner

hope it can fix your issue
Thanks for using Fixya

Mar 25, 2010 | Minolta magicolor 2400W Laser Printer

1 Answer

Where can I purchase a replacement fuser for konica minolta magicolor 2400w


Hi,

You could buy it from :-

http://cgi.ebay.com/Konica-Minolta-Magicolor-2400-2400W-2430DL-2450-Fuser_W0QQitemZ180400879568QQcmdZViewItemQQptZPrinter_Accessories?hash=item2a00baf7d0

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Mar 05, 2010 | Konica Minolta magicolor 2400 Laser...

1 Answer

The ERROR light of my Minolta magicolor 2400W Laser Printer stays on. I have inserted a new drum and all the cartridges are full. What do I do?


Try to open the blue cover and close it. Then press a few times the "rotate toner" button. After that powerswitch off and on, should run.
If it´s don´t worked, make sure you have every transport secure away from the cartridges.
The contact`s should be clean in Printer and on cartridges.
If still the same prob, start from first tip.
It´s worked by my 2400W feed new toner.

Nov 25, 2009 | Minolta magicolor 2400W Laser Printer

1 Answer

Magicolor 2400w prints page and then says jammed


It`s possible you`re using too heavy paper, same problem´s with thin sheet´s?

Oct 03, 2009 | Minolta magicolor 2400W Laser Printer

3 Answers

QMS Minolta 2400W doesn't print


try lifting the drum assembly, at the back of the assembly there is a fuse. replace it. hope this helps

May 25, 2009 | Minolta magicolor 2400W Laser Printer

1 Answer

I have been given a 2400w. I did not get an installation dicc. can you help with the installation?


If you mean a Konica Minolta 2400w here youcan find the drivers:
http://printer.konicaminolta.com/support/current_printers/mc2400w_sup.htm#Drivers

Apr 22, 2008 | Office Equipment & Supplies

1 Answer

Konica magicolor 2400W


To clear chip after refilling toner cartriage.
Go to "Tonerfillyourself.com" I bought refill toner and it includes a new chip and it's not hard to replace it. (Comes with instructions)

Apr 09, 2008 | Konica Minolta magicolor 2400 Laser...

Not finding what you are looking for?
Konica Minolta magicolor 2400 Laser Printer Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5729 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

333 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...