Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Flashing lights I started a wash cycle. I interupped it to add something and now the lights keep flashing and I can't get it stated again.. Lights have flashed all night long. I have tried puching every button on the machine! Please help!

Posted by on

Ad

1 Answer

I've also been having problems with my Whirlpool. Try to turn off the power (unplug, flip breaker whatever) let the machine "re-boot". Then start the cycle again.

Good Luck!

Posted on Oct 17, 2008

  • Jake2771 Jan 05, 2012

    I am having this problem repeatedly; turning off does not help; serviceman out 3 times; help!!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lights keep flashing and door locks without finishing cycle


Kenmore HE2 Plus Front Load Washer Keeps unlocking ...

www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
flashing prewash and add garment lights My HE2 Plus will fill with water, but when ...Kenmore HE3 2plus wont finish cycle Washer wont finish the last1 minute of cycle. ...We ran a load twice and it still did not unlock. du is the code for cannot ... Why does the door keep unlocking and locking in between the drum rotating?

Admiral, Whirlpool, Maytag - Washer Repair - Not ... - YouTube

? 5:51
https://www.youtube.com/watch?v=oBihToN6dxs
Sep 6, 2013 - Uploaded by ApplianceVideo.com
Troubleshoot your Admiral Top Load Washer that has these following symptoms: Not Completing all Cycles ...

Washing machines - Ariston



Jan 05, 2016 | Washing Machines

1 Answer

Kenmore HE2 flashing lights


did the technician point out wat needs to be repaired

Aug 24, 2008 | Kenmore 46462 Front Load Washer

1 Answer

MY BRAND NEW SAMSUNG DISHWASHER HAS POWER BUT WONT START THE WASH THE WASH CYCLE THE TWO CYCLE LIGHTS JUST KEEP BLINKING


What 2 cycle lights? Samsung dishwashers indicate problems and errors by making different lights light up and/or flash. We would need to know the model number too.

Oct 07, 2014 | Samsung DMR78AHS 6 Cycle Stainless...

1 Answer

Lights keep flashing


I would check the water pump for a blockage, there could be something in the pump preventing it from doing its job as the machine cant go to the next cycle until the water has been expelled before the machine can continue eric

Jan 16, 2018 | Indesit Washing Machines

1 Answer

My hotpoint aquarius wmf540 keeps beeping 3 times every 10 mins or so. The cycle finishes with no obvious problems. Is this a warning?


Yes your washing machine is trying to tell you something-somethings wrong-are there any flashing lights while the beeps are happening-also do you have the owners manual-this is always a good place to start-cheers Denny

Oct 20, 2013 | Washing Machines

1 Answer

Start matsui washing machine


Check the washer drain hose for clogs.

Jun 19, 2017 | Washing Machines

1 Answer

Kenmore HE2 washer will not automatically advance through all the cycles


I had this same /similar problem with my machine and found that the micro-computer board on the top rear near the cover of the machine are very prone to having bad electrical contacts on the board where the wire connectors go. The answer simply was to remove this board and add solder to each and every solder pad that goes to the connectors. The board is not bad (defective) just poor electrical connections.The repairman probably just wiggled the 1 with the issue and it worked for you for months as described! Perhaps you could get away with just disconnecting the electrical connectors and plugging them back in -it could buy you some more time before fixing it permanently with solder!

Good Luck!
Rich Lilja

Mar 05, 2017 | Kenmore HE2 Plus Front Load Washer

1 Answer

All lights flash on indesit washing machine soon after switch on


Indesit washing machine lights come on briefly when awitched on at mains and then no power

Feb 17, 2010 | Indesit W 123 Front Load Washer

20 Answers

Kenmore dishwasher wont start blinking clean light


today January 9, 2009...blinking clean light, kenmore dishwasher would not run,,,the solution on Fixya ..."keep hitting normal -heated wash-normal -heated wash buttons over and over...unlocked the blinking green light problem. Dishwasher is running as I type this....will post again when I see the results of another washing tomorrow. H.T. Las Vegas Nv

Jan 18, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...

2 Answers

Ariston Washing machine A1636 - Flashing lights


what 2 lights are flashing each light that flashes gives a differant fault code . Get back to me

Jun 20, 2007 | Ariston Technologies AW149NA Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

Related Topics:

586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal De

Level 3 Expert

2667 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...