I would like to get operating instructions for a model 5L laser printer which I purchased used.

Go to the HP web site and type in your model. From there you should be able to download the driver.

Download 5L user manual here

download the cd instruction software 4rm da site www.samsung.com or www.d4all.com or 4rm google site u will surely get it.

You can download the drivers from this link.

Just select the operating system of your computer.

Good luck!

The L80 printer guts are very similar to the HP 5L and HP 6L printer (Not well known, but the printing engines on many HP printers are made by Canon). In fact it is almost possible to use a 5L/6L toner cartridge in the L80, but as I recall there was a plastic nub that prevented it from fitting properly. This is probably meant to force the user to buy more expensive Canon toner carts instead of using cheaper generics for the 5L/6L. Try HP PartSurfer and you may be able to locate the part that you need.

http://www.partsurfer.hp.com/cgi-bin/spi/main

Try with other applications like Ms Word to check.

First of all, I wouldn't spend 10 cents on this printer at this point, but is there a toner cartridge installed? It could be empty, and it's probably not going to print very well after all this time anyway. Try giving it a few shakes side to side to loosen any toner that may be inside, if that doesn't get it going, then pick up a new laser printer for $70-$100 (basically the price of a replacement toner cartridge)

I have an HP 5L and Vista Premium also. If you would tell me where you did find the driver, I will install it on my computer and possibly solve both of our problems.
Thanks

To all Lexmark owners with the lost disk problem.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website, or use the disk and run the install file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

If you instead want to purchase a new disk, bear in mind that Lexmark does not distribute replacement install disk for all models.

Contact Lexmark here, to see if the disk for your printer is available.


Note:some printerdoes not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

Fusing Assembly is available, You can remove the drum and take the unit and slowly remove the fuser unit from the assembly and fix the new one fusing assembly