Question about Televison & Video

1 Answer

Philip's TV Repair

I have a Philip's 43p8341a projection TV. When opened up to clean the board that controls the power sound & channel I think is called the keyboard. was broke. The part # s on the board when checked on line what I got back was the answer this part is no longer available. Can you Help ?

Posted by on

  • sg600 Oct 13, 2008

    No it is broke in3 places.Any help would greatly be helpful.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 211 Answers

Is the board repairable. A person can sometimes solder and jump broken traces on a bracked board if it's not too bad. As for replacement boards, I suffer the same sitution as you are coming up with on parts. Seems the manufactors don't care much about fixxing, they just want to sell new, so I doubt I can help either. I am out of town at the moment but will be returning in a week, so when I am back at my shop, I will check my inventory and see if I may have something that will work in it's place. If you don't hear from me in a week or so, you'lle know I couldn't help.
Have a great day and good luck on your problem.
Ed Meshechek
NC Electronics
Mills, Wyoming
307-266-4675

Posted on Oct 13, 2008

  • Ed Meshechek
    Ed Meshechek Oct 13, 2008

    I'll be sure to check my stock for any boards that may help. If it broken that bad, I doubt it's repairable.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace control board?


RCA/Westinghouse HV320WXC1007061 T-Con Boards ...

? 4:35
https://www.youtube.com/watch?v=5jO_TZfplR0
Jan 21, 2013 - Uploaded by ShopJimmy.com
RCA TV Repair Westinghouse TV Repair T Con Board Tutorial & No Picture ... Top Common LCD TV problems for bad TimingControl T-Con Boards: .... VR-3215 with no picture no sound but the power LED is solid green, any ...

RCA 276046 Power Supply Unit (PSU) Boards ... - YouTube




Nov 24, 2015 | RCA P52927 52" Rear Projection TV

2 Answers

Samsung rear projection TV, is changing channels by itself and turning on and off by itself. it was purchased about june 2005


Hi Lochness,

My best guess is some moisture has gotten around the controls and is shorting out the buttons making it change channels and Turn on and off by itself.

You need to get some contact cleaner and a can of Air spray.  Gain access to the circuit behind the controls, carefully of course, power turned off.  Clean the buttons, and the circuit board thoroughly.  This should put you in business. Please do not run keep the Television plugges in until you do this as further damage could occur.
I have had this happen to almost every television that I had.  Eventually enough dust and lint will collect, then somehow someway moisture gets into the dust, lint, and circuits.  Just grit your jaw muscle and dive in. 

Oct 25, 2007 | Samsung HL-R6167W 61" HDTV

2 Answers

When powered up-TV continually changes channels---RCA P52937SG MFG 2003


look at the control board circuit -are there and signs of heat damage if so replace board

May 02, 2009 | RCA P52937 52" Rear Projection Television

1 Answer

My tv jumps from channel to channel and turns itself off you can be watching bbc1 and it goes off and comes back on to itv


It sounds like the circuit board that controls the channel/volume/power/etc. is shorted out. You'll probably have to contact the manufacturer and see if the set is still under warranty. If not, contact a local TV repair shop and tell them what the problem is and if they can give you a quote over the phone to fix it. You can then either get a second opinion from another repair shop, or weigh out the price of a new TV against the cost of repair. Hope this helps...

Sep 08, 2008 | Televison & Video

1 Answer

Philips TV model 20PT9007D/17B immediately shuts off after powering on. Pressing channel change keeps the set on but then shuts off when stop pressing channel change.


Sounds like you may have had some fluid go from the screen to the buttons on the main board...like Windex or something, and is causing a short in the buttons. The only way to repair it is to have the main board removed and cleaned or have those buttons replaced.

Jul 22, 2008 | Televison & Video

1 Answer

My tv has sound and no picture


This is a common problem with older Philip Magnavox projection sets. Over time one of the IC chips on the main power board begins to fail. You can find replacment chips and repair instructions on www.magnavoxhelp.com.

Jun 26, 2008 | Philips 60PP9202 60" Rear Projection...

2 Answers

Have power but no sound or picture


Do you have high voltage? Check by turning up one of the screen controls to see if you have retrace lines.(pinstripe diagonal lines across the screen) If present turn the screen control back down until the lines just disappear. Check diodes 6003, 6012, 6025, and resistor 3669. If you don`t get a retrace line by turning up the one of the screen controls, check for missing voltages or shorted components in the horizontal output and power supply circuits. Note: Philips TV`s can be tricky even for experienced technicians. Good luck

May 22, 2008 | Philips 50P8341 50" Rear Projection...

1 Answer

Mitsubishi Power Problem -turns itself off.


Sounds like CRT coolant leak onto signal board = check
for work....................................................T.

Nov 10, 2007 | Mitsubishi WS-48613 48" Rear Projection...

1 Answer

No sound no picture


This is a common problem with older Philip Magnavox projection sets. Over time one of the IC chips on the main power board begins to fail. You can find replacment chips and repair instructions on www.magnavoxhelp.com.

Mar 28, 2007 | Philips 50P8341 50" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69804 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6384 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...