Question about Televison & Video

1 Answer

Model #KCL8806DT under cabinet tv- volume works fine -no picture on tv. Remote works with volume, will not chnge channels on tv. Channels will change if channel button on tv used. Menu button will not show anything.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

The bad thing about your gpx tv is that it is made by apex and u cant get any parts for them they are a throw away units. now that i gave u some bad news now lets see if we can do anything to help u.u will not see a on screen menu if the lcd is not on ok. there is nothing u can do for this tv . it only sales for 70- $80.00 if the unit is under warranty u can send it back and get anotherone. i am sorry but when u buy and off brand unit this is what u deal with when it goes out.they donot make it so it can be repaired.

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error message on screen that says PO 1.15 V100


The error is likely to be from the satellite as the set model listed does not have that kind of error.

Nov 29, 2012 | RCA P52926 52" Rear Projection Television

1 Answer

My television set is stuck on one channel....the audio changes with the channel but the picture stays blurred on one channel...whats wrong with it?


Lots of possibilities. If you are using the remote, try also using buttons on the TV to change channels. If TV buttons work, the remote is broken or perhaps try changing batteries and cleaning battery contacts on the remote. If neither work, lots of other things to try. You may need to set preselect channels, so your TV thinks there is only one channel out there until you do. If you are on a cable box you just need channel 3 and change channels on the cable box. I can't tell what you mean by "audio changes with the channel" ... if you mean that when you try to advance channels, it increases volume and moving down in channels lowers volume that would be strange -- if you are using a programable remote it might not be set correctly (try another programming code). The "blurred" picture is probably symptomatic of having the set on the wrong channel, and if you could set channel it might clear up ... I'd start with getting channels to change. If you need more help, give the brand and model of TV, say if you are using a remote (original or programable), and what the 'audio changes' comment means in more detail. Probably worst case is that your tuner circuit is fried, but don't assume that without more diagnostic.

Aug 29, 2011 | Televison & Video

1 Answer

Hi, remote not working and unable to change channels using tv buttons. other buttons on tv - volume etc are working fine


if your remote is for cable, then you have to push the cable button, then change channels. volume will work only on tv mode.

Oct 06, 2009 | Sampo PME-50X7 50 in. HD-Ready Plasma...

3 Answers

Volume lock of philips vardan tv


I hv philips 21RF vardaan TV ,there is sound on AV channel. and the picture is blinking. even some menu setting have changed.. i tried using the service menu but cudnt understand anything. 2 new av channels have come.. av2 and front which were not present before. sound is not coming even on the other channels but picture is fine on them. only on the av1 channel it is blinking., the philips technision had solved this prob once by pressing some code by remote and i don't know the system code

Sep 10, 2009 | Philips 20DV6942 20 in. TV/DVD Combo

3 Answers

Why does my RCA TV cycle through channels on its own?


this is the same type of problem happening with other rca models and I know it is the EPROM CHIP but why this is failing is either because of design flaw , dirty enviroment that they were made in , to much voltage or current to the chip or too much of a draw from the chip causing it to fail . Or even a random frequency from the IR sensor or its circut I'm still investigating and testing.
leave the tv unplugged for at least 3 weeks durring this time resolder any solder that don't look good , I did this and it lasted for about 6 months(always plugged in to the wall) before it started doing it again. model # 27v412t

Oct 04, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

Ghosts?


re- program...................................................

Jan 25, 2008 | RCA F32450 32" TV

1 Answer

Intermittent snowy pictures under Channel 51


Probably needs a new tuner or something associated with the tuner.

May 31, 2007 | RCA F36673ET 36" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72214 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

69014 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...