Question about Konica Minolta magicolor 2400 Laser Printer

1 Answer

Magicolor 2400w color low. how to allow printing in black without need to replace the color toner? I mean, i only need to print in black only so at the moment i can ignore the color low warning.

Posted by on

  • malaymixed Oct 13, 2008

    I guess that is the only way to do it..thanks

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

Its not possible as whast u required.because all the cartridges should be shown full for printing whether you use the colour or dont use.
but you can get your cartridges refilled at any local stationery shop or at the local refilling center.
and this will not cost u as new cartridges.its exactly less then half cost of new cartridges.

thanks.

Posted on Oct 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica Minolta 2400 laser printer has a slow, 52 times per minute, yellow lightning bolt flashing on its control panel on the front right of the machine. It seems to be locked up. It wont print or r


Sir bad idea to replace with partial one. Replace with OEM cart Brand New machine counts how many prints for several different parts in the machine when it reaches certain counts on certain part it wants NEW stuff.

Dec 18, 2014 | Konica Minolta Magicolor Model 2400w Color...

1 Answer

How to deactivate toner colour errors?


if any toner ends in a printer, then replace it.otherwise error will show continuously.

Apr 22, 2010 | Konica Minolta magicolor 2400 Laser...

1 Answer

My new Magicolor 1600w Printer hasthe toner light


Probably. Most color images have some black in them as well.

Aug 09, 2009 | Printers & Copiers

3 Answers

Konika Minolta 2430 DL won't let me print


Look through the menus on the printer for a setting for "Low Toner" -- the choices of what to do are usually either "continue" or "stop" or something similar (my 2430DL has this option setting) -- set this option to "Continue".
My 15 year old HPs also have a similar setting. However, this will keep it printing when the black runs out, so you will need to check your print production run visually as you go along to make sure the quality is what you need

Jun 22, 2009 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

Error light flashed when trying to print with Magicolor 2400W


Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Jan 20, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Magicolor 2400W error


This happens to me every few months, I have to do a VERY detailed cleaning of all toner sensors. The knowledgebase on KM's website is actually very good about walking you through which sensors to clean and pictures indicating where they are located. This has fixed me up every time. GOOD LUCK!

Jan 19, 2009 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

Printing black/white when color toners are low


Try taking the color toner containers out of the printer and shaking them a bit. Put them back on and try again. This could confuse the sensors into believing that you still have some toner left.

Good luck

Dec 13, 2008 | Konica Minolta magicolor 2300DL Laser...

3 Answers

Toner Not Installed - After replace black


pleas clean toner chip reader, remove pc drum and all toners, under the toner rack there is a 3 pin chip reader, use pressure air to clean it. if the new BK toner is not original, it will say only not genuine toner but will print.

Jun 23, 2008 | Konica Minolta magicolor 2400 Laser...

1 Answer

Rotate Toner Button and Replace Cartridge Messages


Hello
take out all toners and pc drum, use pressure air to clean chip reader under the toner rack (right side) also use some alcohol to clean chips on toners and reinstall.

May 20, 2008 | Minolta magicolor 2400W Laser Printer

Not finding what you are looking for?
Konica Minolta magicolor 2400 Laser Printer Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...