Question about HP Office Equipment & Supplies

1 Answer

Paper jam - HP Office Equipment & Supplies

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

There could be three reasons for this problem
1)the printer cover is not properly closed.
2)either any of the cartridge is faulty.
3)or there is literally the paper jam in the printer.so at the back of the printer there is a assess door just remove that door and you can see inside any paper jam.also look for any minute tiny pieces of paper blocking the gears to forward and it shows paper jam.


thanks.

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i switch on my photocopier tohiba 2860, it asks for service and gives an error code 08221-918100. what could be the problem?


Hi tkasirye,

Welcome to Fixya.

You may need to check again the error code. According to the manufacturer's checklist for error codes, only the following are documented;

  1. Error Codes - Toshiba 2860

  1. "E01" Paper jam inside machine. "E02" Paper jam near the fuser. "E03" Paper jammed inside machine when power supply is switched on. "E04" Front cover open while copying. "E05" Paper jam near the aligning roller "E08" Paper jam at stacking area in the ADU "E11" Paper feeding jam at the ADU "E12" Manual feeding jam "E13" Paper jam from cassette 1 "E14" Paper jam from cassette 2 "E15" Paper jam from cassette 3 "E16" Paper jam from cassette 4 "E17" Paper jam from cassette 5 "E19" Paper jam from the LCF "E21" Paper jam in transport route 1 (LCF) "E22" Paper jam in transport route 2 (COPIER) "E23" Paper jam in transport route 3 (ALIGNING) "E25" Paper jam in transport route 4 (PFP) "E71" Original feed jam in ADF "E72" Original transporting jam in ADF "E73" Original exiting jam in ADF "E75" 2nd original feeding jam "E81" Paper jam before sorter "E82" Paper jam in sorter "E83" Sorter early arrival jam "E84" Paper in sorter when power is turned on "E85" Joint open jam while copying "E88" Paper jam outside the sorter bin "C01" Abnormal operation of the copier main motor "C04" Abnormal operation of the PFP main motor "C05" Abnormal operation of the ADU main motor "C11" Abnormal operation of the ADU side motor "C12" Abnormal operation of the ADU end motor "C13" Abnormal operation of the upper cassette tray "C14" Abnormal operation of the lower cassette tray "C15" Abnormal operation of the PFP upper cassette tray "C16" Abnormal operation of the PFP middle cassette tray "C17" Abnormal operation of the PFP lower cassette tray "C18" Abnormal operation of the LCF tray "C21" Optics carriage initialize error "C22" Lens initialize error "C23" Mirror initialize error "C26" Faulty exposure lamp "C33" Easy set-up is failed "C35" Developer material exists at the transfer separation adjustment "C41" Faulty thermistor or heater "C43" Faulty thermistor "C44" Faulty heater "C45" Sub thermistor is open
Shoulg you not find any of these mentioned error codes, I suggest you contact the tech support especially if the machine is still under warranty.

Hope this helps.

Takasashi

Jul 05, 2011 | Toshiba Office Equipment & Supplies

2 Answers

Error e03, but there is no jammed paper


E, 0, 3
Paper Output Tray is closed / Paper jam


Summary
If the Paper Output Tray is closed, open it. The machine resumes printing.


If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button.
E, 0, 3
Paper Output Tray is closed / Paper jam


Summary
If the Paper Output Tray is closed, open it. The machine resumes printing.


If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button.
E, 0, 3
Paper Output Tray is closed / Paper jam


Summary
If the Paper Output Tray is closed, open it. The machine resumes printing.


If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button.

Techbelkin

Nov 03, 2010 | Canon Pixma Mp250 Allinone Inkjet Photo...

2 Answers

Had paper jammed - removed jammed paper - but nerror light still on


Before you can clear a "PAPER JAM" or "PRINTER JAM" error, you must locate where in the unit the paper is jammed.
First, unplug the machine for safety and disconnect the telephone line. Next, follow these instructions based on where the paper jam is located.


Paper is jammed inside the paper tray:
  1. Pull the paper tray out of the machine.
3-ug-1621.gif
  1. Pull out the jammed paper to remove it.
3-ug-1732.gif
  1. Reload the paper in the paper tray.

  2. Reinstall the paper tray.


Paper is jammed inside the machine:


  1. Remove the jam clear cover on the back of the unit. Pull the jammed paper out of the machine.
chap1230.gif
  1. Re-insert the jam clear cover.

  2. If you can not pull out the jammed paper, lift the scanner cover from the right-hand side of the machine until it locks securely into the open position.

  3. Remove the jammed paper.


    3-ug-2033.gif

  4. Check the print head's position. In the example photo the print head is positioned at the left hand side of the platen area.

    scr1.jpg


  5. Gently move the print head to the center.


    scr2.jpg

    Note Be careful to not force the print head to move.
    If the print head is positioned at the far right hand side, you cannot move it. Please contact Brother Customer Service from "Contact Us".



  6. Examine under the print head. If anything is found, remove it.

    scr3.jpg

    Note Use a flashlight if necessary to check thoroughly.





  7. Lift the scanner cover to release the lock. Gently push the scanner cover support down and close the scanner cover.




    3-ug-21.gif


  8. Reconnect the power cord and telephone line.

Note To prevent paper jams, do not put multiple kinds of paper in the paper tray at the same time.

If the message continues to appear on the LCD, the machine will require repair. Please contact Brother Customer Service from "Contact Us".



Thanks for using fixya......

Oct 26, 2010 | Brother Office Equipment & Supplies

2 Answers

I have a Epson stylus CX9400fax a piece of paper is jammed way inside the machine, I can't even see it to try and get it out! I've tried turing the machine on/off numerous time (still not expelling the...


If paper is jammed, a Paper jam message will appear on the control panel display.

Follow these steps to clear the jam:

  1. Gently pull any jammed paper out of the output tray or sheet feeder.

  2. If the paper is stuck inside, turn off the Epson Stylus CX.

  3. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus CX back on.

    alert_note.gif Note: Be sure to check the far left of the carriage area when checking for jammed paper. Paper that is jammed there may be hidden from view.
If paper jams inside the Automatic Document Feeder, clear the jam as follows:

  1. Open the Automatic Document Feeder cover and remove any jammed paper.

    pm_paperload_215_er.gif

  2. If necessary, lift the document cover and remove any paper that has jammed inside.

    pm_paperload_216_er.gif

  3. Press OK to clear any messages on the display screen.

Jun 02, 2010 | Epson Stylus Multifunction Inkjet Printer/...

2 Answers

Stylus CX9400 Photo Printer: paper jammed inside printer...


If paper is jammed, a Paper jam message will appear on the control panel display.

Follow these steps to clear the jam:

  1. Gently pull any jammed paper out of the output tray or sheet feeder.

  2. If the paper is stuck inside, turn off the Epson Stylus CX.

  3. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus CX back on.

    alert_note.gif Note: Be sure to check the far left of the carriage area when checking for jammed paper. Paper that is jammed there may be hidden from view.
If paper jams inside the Automatic Document Feeder, clear the jam as follows:

  1. Open the Automatic Document Feeder cover and remove any jammed paper.

    pm_paperload_215_er.gif

  2. If necessary, lift the document cover and remove any paper that has jammed inside.

    pm_paperload_216_er.gif

  3. Press OK to clear any messages on the display screen.

May 18, 2010 | Epson Stylus CX9400 Photo Printer

2 Answers

My canon MP620 Paper Jam Pull out the Jam Paper Al


There are pieces of paper stock on the sensor, when the paper jam happened then you pull out the paper did you get the whole page of the paper or have missing pieces? open the paper guide, turn off and on the printer and observe the unusual objects in the roller, this error is caused by objects in the sensor.

Oct 20, 2009 | Canon PIXMA MP620 All-In-One InkJet...

1 Answer

Getting the error on my HP 4345mfp - TOP OUTPUT BIN, PAPER LATE JAM. 5017-Oct-2009 02:02 PM18209913.09.0048.081.2TOP OUTPUT BIN, PAPER LATE JAM 4917-Oct-2009 02:00 PM18209613.09.0048.081.2TOP OUTPUT BIN,...


my experience says jamming in duplex area using card stock. this may occur if default is duplexing. set default to single side and / or try same job using plain a4 80gm2

Oct 20, 2009 | HP LaserJet M4345 MultiFunction Printer

2 Answers

Canon error code 6000 in mx308


please help me. i have canon print mx308. the have paper jams. paper has the full out from print. how i can finish the problems?

Jul 25, 2009 | Canon Pixma MP450 All-In-One InkJet...

1 Answer

Paper Jam


Good day, Check the table below about the problem of paper jams.

Display and Meaning

[Paper Jam 0] - Paper has Jammed in the feeding area of the paper input tray.
[Paper Jam 1] - Paper has jammed in the fuser area or in the manual feeder.
[Paper Jam 2] - Paper has jammed in the paper exit area.

hope it will help you.


Jun 04, 2009 | Samsung SCX 4200 All-In-One Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...