Question about QuietLine WD-9900 Front Load Washer / Dryer

1 Answer

Hotpoint BWD129 1200 spin - unwanted drying cycles

My hotpoint washer/dryer is adding a drying programme to every wash I do even though it is not being selected... I have tried resetting the machine iaw the instructions by holding the start button in for 5 seconds but the problem persists... Any help would be much appreciated

Posted by on

  • Anonymous Nov 10, 2008

    exactly same problem

  • nanselms Dec 21, 2008

    my BWD129 adds an unwaned drying cycle randomly, i.e. some times it does not. But there is no system to the madness.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is more a workaround than a solution. When you choose the washing programme (say "D") and push the on/off button, two lights will flash, the "door locked" and the "drying" one. Now turn the "drying programme" button until the "drying" light stops flashing (in my case, this is true when I set the drying programme to 40°C). Then start the washing mashine.

Seems like the function of the drying programme button has shifted against the settings written on the button...don't ask me why! Of course, no guarantee but works for me. Please let me know if it does for you.

Posted on Dec 22, 2008

  • Kevin howley Sep 16, 2011

    If every wash programme ends with drying cycle then it's very likely the drying switch is disconnected from main pcb by connector and wiring (spin cycle effect over time). Open washing powder door, undo 2 screws at top and remove front cover carefully by pulling to left and then off. Easier if you can take top off but a simple workaround

  • Kevin howley Sep 16, 2011

    I had same issue and resolved by disconnecting the wiring on back of switch,cleaning contacts and the restoring connectivity

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Have a WDL540 can you explain the symbols on the right hand side of the machine has mins and other symbols. Don't have an instruction book. A wash takes 2 hours at 40 degrees its too long.


Do you mean a Hotpoint Aquarius WDL 540 washer? The wash cycle timing is available in the manual on page 8 of the manual (see link below). A normal-sized cottons wash at 40 degrees C takes about 150 minutes (2 1/5 hours) if you have good water pressure and do not use too much detergent. The coloreds cycle is shorter (just under 90 minutes). The indicator lights on the very right hand side (in a downward slash pattern) give the cycle status information. The top light is wash, and the next one down is rinse. The rest are Spin, Dry and End of Cycle. See page 7 of the manual. The function buttons, below the wash temperature and drying time/humidity selection knobs, are from left to right: Super Wash, Extra Rinse, Mini Load, Slow Spin. These are given on page 9. The dryer dial gives you the choice of selecting a dry time from 40-180 minutes or by humidity. The humidity options are Iron (leaves clothes slightly damp), Hanger (ready to put away) and Cupboard (to dry heavy items like towels to a very dry stage). Note the dryer can't manage as large a load as the washer function does. You may need to split the load after doing the wash.

The manual for the WDL 540 is available on the product page: https://www.hotpoint.co.uk/appliances-1/washer-dryers-3/hotpoint-aquarius-wdl-540-p-.c-washer-dryer-white/F064656/ . The picture of the washer shows the function buttons when you zoom in on the control panel. The direct link to the manual is http://docs.hotpoint.eu/_doc/19512781900_GB.pdf .

I hope this helps.

Cindy Wells

Feb 02, 2018 | Washing Machines

1 Answer

My Hotpoint Aquarius WD440 smells of hot rubber when it is on the M (drying) programme and the clothes come out smelling of rubber. Can you tell me why this is happening. Everything is working fine...


Hotp[oint Aquarius WD440 washer /dryer - Has a distinct smell from clothes when washed like stagnant water is lying somewhere in the machine, It has all benn stripped down but cannot find anything wrong. Whats the solution????

Aug 11, 2011 | Hotpoint Aquarius WD63 Front Load...

1 Answer

I have a Hotpoint BWd129 washer/dryer. When I


I have a similar Hotpoint model to this, that does something very similar now and again, usually when trying to set a delayed start.

The only way I have found to "fix" it is to turn the machine off for at least 5 minutes, and then try again.

Hope this helps.

Jan 13, 2010 | Zanussi WJD1257W Front Load Washer

1 Answer

I want to use just the washing machine but not teh dryer what do i do


Just use the wash programmes, make suire you do not select a dry programme.
The informatioshould be in your user handbook.
Hope this helpos.

Dec 03, 2009 | Hotpoint Washing Machines

2 Answers

Hotpoint washer


common problems with timer which work like a clock and goes though the cycle, bad timer will cause it not to go through its cycle. it very cheap and easy to replace everything is all plug in.

Nov 14, 2009 | Hotpoint WMA40 Front Load Washer

1 Answer

Door Locked. Cannot open. Washine inside.


Try buttons "dry" & "spin" together for a few seconds. This is the child lock display.

Or press "end of cycle" for over 3 seconds.

Or press "options & select" till the light goes off.

Works for other machines..............And please rate me if helped

Mar 16, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Instruction Manual for Hotpoint washer dryer wd420


Try this link:
http://www.hotpointservice.co.uk/hs/pages/manual/manual/search.do

Enter the model number in the search box, and download instructions.
Please rate my solution.
Thankyou.

Mar 02, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Wash programme won't finish


this happened to my machine, I had to get a repair guy out in the end and he said it was the heating element had gone and that was why the cycle wouldn't move on as it could not heat the water to right temp.
he charged me £60 to repair and for part, still a lot cheaper than hotpoint though. try to get a local guy, hotpoint charge £100 basic.

Feb 15, 2009 | Hotpoint BWM12 Front Load Washer

Not finding what you are looking for?
QuietLine WD-9900 Front Load Washer / Dryer Logo

785 people viewed this question

Ask a Question

Usually answered in minutes!

Top QuietLine Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Brad Brown

Level 3 Expert

17173 Answers

Are you a QuietLine Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...