Question about Audio & Video Receivers

1 Answer

I have no sound when i plug in my speakers - Audio & Video Receivers

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 70 Answers

Make sure you are plugging into output at the back of receiver/ not input. Also make sure you set receiver on corresponding output on menu. If your playing a cd make receiver is set to cd and the output on back of receiver is on the same setting.

Posted on Oct 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The speakers no long produce sound after using the headphone jack,,disconnected jack , still no sound


When you plug in the headphones, the jack itself routes the signal away from the speakers. When you unplug the headphones, the jack has contacts that close again, routing signal to the speakers. If the jack contacts are dirty, they won't close correctly. I suspect were you to clean the contacts, you'd solve the problem.

Feb 25, 2015 | RCA Rt2760 Home Theater Receiver

1 Answer

Technics stereo


These units are known for having bad solder connections develop over time. Would have to check bottom of main board for bad connections especially around amp ic's and voltage regulators.

Apr 26, 2013 | Audio & Video Receivers

1 Answer

No sound


Make sure the speaker are plugged into the "audio out" ports. Black negative, red positive.
If a dvd players or other system is hooked up, the speaker should hook into that unit, then the unit is hooked to the auxiliary port(s), or the proper ports for each unit: ex: cd/dvd should be plugged into vd/dvd; same for vcr, game system - auxiliary is for pretty much any unit not listed on the backing of the receive - however, some units will still work while plugged into the ports other than auxiliary.
Make sure the receive is selected to the desired device.
If you simply have the speakers plugged into the speaker ports, make sure the speaker themselves are still good - try hooking them up to another source such as a a dvd player equipped with surround sound or speaker adapters that will suffice your speaker wiring.
Please let me know if you need further assistance.
carsandcomps,
Guru, Premium Expert @ Fixya.com

Jun 28, 2010 | Onkyo TX-SR606 Receiver

1 Answer

No sound out of the main speakers. sound will play in center or rear speakers


are you sure you have them plugged into the main speaker (Front) not speaker B? or make sure you dont have speaker B turned on only.

May 11, 2010 | Onkyo TX-SR502 Receiver

1 Answer

No sound from speakers. Everything else OK.


If headphones work then so does the amplifier. When did this problem start? From what I can find it almost sounds like it thinks you have headphones plugged in, which would disable the speakers.

Apr 24, 2009 | Audio & Video Receivers

1 Answer

No sound out of speakers (Marantz SR5200 receiver)


sounds like you might need to open it up and check the speaker wires that you plug your speakers up to it might be lose or something else like that cause it happened to me before and that was it.

Feb 21, 2009 | Marantz SR-5200 Receiver

1 Answer

Pioneer VSX-815 speaker wiring


You can hook them up either way, the banana jacks are good for hooking two speakers to one terminal (ie one through the botton, one banana) but the electrical connection is the same either way. Sometimes the banana capable jacks are on speakers A and speakers B, and the surround don't accept banana plugs, your stuck with how your reciever is wired.

Dec 08, 2008 | Pioneer VSX-815-K Receiver

1 Answer

We have the sharper image wireless indoor outdoor speaker and when we plug everything in there is nothing coming out of the speaker. Are we able to get it to pick up satellite radio?


The wireless speakers do not pick up a wireless signal outside of the round wireless broadcaster that came with the speakers. You will need to connect that to your satellie radio to broadcast to the wireless speakers. Make sure the wireless broadcaster component is plugged into the sound source you want to make wireless. After you've connected the broadcaster to the sound source and turned everything on then push the Auto tune button to connect to the broadcaster and recieve the sound.

Nov 27, 2008 | Audio & Video Receivers

1 Answer

I HAVE NO SOUND ON MY GATEWAY GT5660E. i HAVE TRIED EVERYTHING


Do you have the speakers plugged into the correct plugs in the sound card? Make sure speakers are not plugged into the mike jack. Do you hear any static as you remove and replug the jacks? Do the speakers have a power light?

Open Control Panel ->Sounds and click on Sounds tab. Do any sounds play? Click on the Audio tab and make sure Default device is your sound card. Click on Volume tab and then Advanced. Make sure nothing is muted.

Assuming you have Windows, check the sound card in Control Panel->System, Hardware, Device Manager. Check for correct drivers. If necessary, uninstall sound card and let Windows detect it again and install drivers.


Sep 16, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...