Question about JVC HD-61FH96 61" Rear Projection HDTV

1 Answer

Jcv rear projection tv modal# hd-61fn97

The front power light is blinking and the tv is not coming on.

Posted by on

  • 1 more comment 
  • martano1 Nov 22, 2008

    Both lights are blinking on front of tv, no picture or sound...

  • martano1 Nov 22, 2008

    Lights on front of tv are blinking and no picture or sound...

  • Anonymous Jan 10, 2009

    won't come on both front panel lights flashing and a clicking sound

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No picture and no sound blue and red light flashing continually cannot turn off unless we unplug it.

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

JVC Modle HD-61FN97 2006 65 inch tv light went out replaced it now can not adj brightness


Aside from the customer controls you might be able to turn the screen controls up a bit to get more brightness, they are on a black block inside the set.

Nov 29, 2012 | JVC AV-65WP55 65" Rear Projection...

1 Answer

Tv wont turn on, the power indicator nor the remote receiver light does not light up, the 3rd circle on the front of the tv blinks red!! But it wont come on regardless, tv is only 2 years old, what to...


The blinking red light means set is in shutdown because of a short inside the tv.

Someone to begin would have to open it and check power supply voltages inside the set....that is the first step.

Mar 18, 2012 | Televison & Video

1 Answer

I have a Panasonic cinemavision HD TV rear projection. It turns on and then shuts off as soon as the picture comes up. Can this be fixed?


Almost anything can be fixed.

When it shuts off does the power light on the front blink in a sequence like 3 or 5 blinks then pause and repeat?

Jan 21, 2012 | Panasonic Televison & Video

1 Answer

I have tried to turn my television on and the status light blinks for about a minute, you can hear the TV try to start up and then the whole system shuts down without anything actually powering up. Also...


Unplug the tv for about a minute - plug it in and press the reset button on the front of the tv - hold it until the light blinks. The set should come on in a minute of two - if not try the same routine again.

Jan 16, 2011 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Sony HD Projection TV KDP-57WS550, timer light blinks 5 times and repeats sequence. When power button is pushed sound comes on briefly, no picture, then TV goes off. Please advise.


Mine did this after a power flash. Lights blinking 5 or 6. They blink fast lol. I have sound till tv powers back down. Front yard bond fire? Or any ideas? Thx.
10_18_2015_2_55_53_pm.jpg

Dec 25, 2010 | Sony Grand WEGA KDP-57WS550 57" Rear...

1 Answer

When i turn power on the power light comes on but no picture the lamp light comes on then starts blinking?


The tv projection lamp has not been replaced in this tv like 1 1/2 or 2 years?The tv been on an watches tv like 4 or 5 hours a day?Yes,than the projection lamp life is over.The tv require a new projection lamp.

Oct 12, 2010 | JVC HD-52G886 52" Rear Projection HDTV

2 Answers

I turn the tv. on , the green light comes on then


When you turn it on and it shuts off---ON THE FRONT OF THE SET PRESS AND HOLD BOTH THE MENU AND INPUT(DEVICE) BUTTONS TOGETHER FOR AT LEAST 5 SECONDS AND RELEASE BOTH BUTTONS.

Power light should blink a two digit error code---for example: 2 blinks, a pause and 2 blinks--This is the most common error code.


Let me know what error code you get and I will tell you what it means and if 2-2 what the problem is.

If this information helped you, rate this solution as I do this here for FREE.

SD TECH

Nov 12, 2009 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Can't turn tv on


TV DOES NOT COME ON, RED POWER LIGHT BLINKS ON THEN OFF

Jun 21, 2009 | Hitachi 43UWX10B 43" Rear Projection...

Not finding what you are looking for?
JVC HD-61FH96 61" Rear Projection HDTV Logo

Related Topics:

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73073 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...