Question about HP Pavilion dv1000 Notebook

1 Answer

Screen still dosen't work after installing.

Hi this is manny . i followed all the steps to install the lcd screen and did everything as i supposed to do but it not turning on or nothing comes up on the screen and i know the laptop turn on . i also try using a external monitor by using vga output through my laptop but still nothing shows up . any help will be helpfull . thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

The battery which is inside ur laptop is dead.i am not talking about the battery which runs uur laptop i am talking about the battery which is inside ur laptop and it is responsible for fkeeping the pc date and time up to date.take the machine to any sevice centre and ask them to change the battery.if that doesnot work then ask the technician to reset the bios jumper which is present inside the mothereboadrrd..the location of that buttom varies from motherebiard manufracture.which laptop u r using.has problem started after any hardware or software change.how old is ur laptop.does during boot it produces any beeps.if it produces three beeps during the boot then u have a faulty ram.

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just want to you that how manny salary provide to complete cisco ccent exam ,m


ok sir ..

step 1: My 1st Reason for Re install Windows Xp 2.RPU 3.1 not working.
So I am bhuvnendra re install windows xp2 this machine.
Step 2: install java+RPU 3.1
Step 3: SATA DVD drive disconnect .
Step 4: ON the system
step 5: safe mood black screen are display.
Step 6: any mood select booting o.s
Windows continue restarting.


my solution


Step : SATA DVD drive connect


system are properly booting and proper working.


please give me what is real problem in this machine.

Oct 13, 2012 | Cisco Advanced V3 Ccent Ccna Ccnp Home Lab...

1 Answer

When I press the OSD reset button to get the screen to optimize the display, the displayed image moves 3 inches to the right (so I get 3 inches of black screen on the left) and the display looks washed...


Hi Mdamon,

Please follow the below steps to solve your problem :-

Your LCD panel has the settings button which you need to use to adjust your LCD screen to the center and make sure there is no black strip remaining after appropriate settings,

To make things easy for you , click on the below to download the manual directly so that you have a complete idea of the steps that are supposed to be taken for the screen adjustment.

There are many factory settings of different settings that are preset and can be activated using the panel.

Tip :- Try changing the screen resolution via the display properties from your desktop as an incorrect resolution could result in bad images or blurred images.

http://bit.ly/lMjygS


Hope this helps, your feedback would be appreciated.

May 13, 2011 | Envision EN9410 19" Flat Panel LCD Monitor

2 Answers

Hwo to instal windows 7


Hi,

Welcome to FixYa.

Please elaborate your problem providing us with more details.

Thanks for using FixYa.

Nov 26, 2010 | Polaroid FLM-3732 Television

1 Answer

How do I remove the defective display screen and install a new one for the HP G71-340US notebook?


Hi, Plz click the following link for the details. Here it showing HP Pavillion dv900 screen replacement.. All the model having smiler steps to replace the screen
http://www.insidemylaptop.com/remove-lcd-screen-inverter-board-hp-pavilion-dv9000-laptop/

Sep 13, 2010 | HP VM114UA notebook

2 Answers

Laptop New LCD Screen Cycling Colors


It's probably the wrong screen, cable ,or inverter; in spite of what the repair shop tells you .
Also, sometimes the cable gets pinched if not installed carefully, or the cable connector may need to be re-seated.
Is your laptop a Dell Precision M60 ? I'll see which screen it's supposed to have.

Jul 28, 2009 | Dell Precision M60 Notebook

1 Answer

The phone screen has gone white, i can't see anything...


your phone lcd need to replacing.in some cases connectors have problem,it must test with a new lcd & then problem will solve.

Jun 04, 2009 | Nokia N70 Cellular Phone

2 Answers

Everything works but the touch screen.


caring for the touch screen includes touching the screen with clean and DRY hands., if your phone fell in the water, it will likely damage the touch screen.. contact your nearest LG repair center.. i hope your phone will soon be fine..

May 01, 2009 | LG Vu Cellular Phone

1 Answer

F380 All-In-One won't print


first of all you need to install the software..these are the steps to install the software please follow the steps below

Two installation options are available when installing the software and drivers from the product CD. The recommended install installs everything your device requires to work, including a suite of software recommended for your installation. The custom install allows you to choose what software to install. The recommended install is designed to work for most users. Use the custom install only if you have one of the following reasons:
  • Low hard disk space on the computer.
  • You do not want the additional software.
  • Errors occur during the recommended installation. NOTE: If errors occur during the recommended install, fix them before doing a custom install.
Recommended install Complete the following instructions to install the software: CAUTION: Do not connect the USB cable until prompted to do so during software installation. HP recommends using a USB cable that is less than 10 feet (3 meters) long. NOTE: Choose unblock or accept on all firewall messages or the install will fail.
  1. Insert the software CD into the CD-ROM drive of the computer. The software installer starts automatically. NOTE: The User Account Control screen might display. Click Continue .
  2. Click Install on the Thank you for purchasing from HP! screen.
  3. Click Next on the Welcome to the Install Wizard... screen.
  4. Click Next on the Do Not Block HP Install Wizard Processes screen.
  5. Select Yes or No on the Automatically Check For Updates screen and then click Next .
    • Choose the Yes (recommended) option to check for updates through an Internet connection.
    • Choose the No option if you do not want to check for updates.
  6. Select Recommended on the Installation Options screen, and then click Next .
  7. Follow the instructions on the screen that displays to finish installing the software.
Custom install CAUTION: Do not connect the USB cable until prompted to do so during software installation. HP recommends using a USB cable that is less than 10 feet (3 meters) long. NOTE: Select unblock or accept on all firewall messages or the install will fail.
  1. Insert the software CD into the CD-ROM drive of the computer. The software installer starts automatically. NOTE: The User Account Control screen might display. Click Continue .
  2. Click Install on the Thank you for purchasing from HP! screen.
  3. Click Next on the Welcome to the Install Wizard... screen.
  4. Click Next on the Do Not Block HP Install Wizard Processes screen.
  5. Select Yes or No on the Automatically Check For Updates screen and then click Next .
    • Choose the Yes (recommended) option to check for updates through an Internet connection.
    • Choose the No option if you do not want to check for updates.
  6. Select Custom on the Installation Options screen, and then click Next .
  7. Select which software to install by selecting or clicking to clear the check box next to each item on the Custom Installation screen. Click an item to see its description and the required disk space. NOTE: You must install the drivers and the HP Imaging Device Functions for the buttons on the front panel to be functional.
  8. Follow the instructions on the screen that displays to finish installing the software.
  9. once the software installation is complete try to print that should work

Mar 09, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

Can not config the size


if the screen is big, try to change the screen resolution, or install the video driver from the manufacturer drivers disk that you would have,,,

refer to help and support in your computer for guidance on how to reduce the screen resolution,,,

click on start >>>> help and support, then on the search box type how to change the screen resolution
2. how to install the video driver
you will have step by step instructions, and you could get it resolved,

follow those steps clearly

Feb 14, 2009 | Acer AL1912 19" LCD Monitor

1 Answer

Fix system error


Hi,
Please click on the below link or copy the URL and paste it in your web browser. Follow the steps..
http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:93:0:0&docid=ENUS547
OR

If you are getting any type of 'CLEAR SYSTEM ERROR' on the LCD screen of the printer, please follow these steps:
1) Remove the power cable for 2 minutes and the USB cable from behind the printer.
2) Press and hold down the stop clear button and reconnect the power cable back to printer.
3) The printer LCD screen should clear the memory error.
4) If the same error message persist on the LCD screen, please follow the instructions below.
5) Unplug the power cable for 2 minutes and USB cables from behind the printer and open the printer cover and remove both ink carts.
6) Repeat step 2 and Install both cartridges then the screen will display Cartridge's clean, press start.

Thank you........

Sep 28, 2008 | Lexmark X63 InkJet Printer

Not finding what you are looking for?
HP Pavilion dv1000 Notebook Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...