- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, Did you set this printer as the default printer? To do this go to Start - Printer and Faxes, right click on HP printer, select Set As Default Printer. If you are not see your HP Deskject F340 there, that mean your printer driver is not installed. Please install your printer driver. If you already set it as the default and it is still not printing. Restart your computer to try solve problem. You said that printer scans so the connection between your computer and printer is fine. Problem is your computer doesn't take the printer as it's printer device yet. Hope this will help. Thanks for reading
go to your mac hard drive on your desktop go to applications if you installed the drivers correctly you should have a hp folder if not I suggest installing the drivers for your os check your os version by clicking on the apple icon top left and go to about this mac, In the hp folder you looking for scan pro and you can use that for scanning
start, settings, printers, right click printer you are wanting to share out. Click on properties.Click "sharing" tab. Click on network setup wizard. Follow the instructions from there. You should be able to print to the printer from another computer once your computer network is setup to share resources like printer or internet connection.
> start-->run, type services.msc
> double click on print spooler and click on stop and then click on start. press ok and close all the windows.
> unplug the usb cable from the printer
> now go to control panel and open printers and faxes.
> right click and delete all the printer icons related to hp deskjet f300 series.
> now plug the usb cable back to the printer
> wait for few minutes while it installs the driver automatically.
> thats it... now try printing
You have a paper jam. get a torch and thoroughly check doen behind unit where paper goes after removing all paper. Oopen cover, let carriage move, once settled, check everywhere her too, all around, rollers, near carriage, teeth, sides, etc, and remember it can be the tiniest slip easily missed. Good luck.