Question about Philips 55PP9401 55" Rear Projection Television

1 Answer

SET WON'T POWER UP

TV POWER IS TURNED ON AND POWER LIGHT IS ON, BUT SET DOES NOT POWER UP. AT FIRST SET WOULD COME ON AFTER 5 TO 30 MINUTES OR SO. NOW SET MAKES THE SOUND YOU HEAR AS POWER COMES ON, BUT NO PICTURE OR SOUND AFTER THAT.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

I hate to tell u but maganvox bigscren are not ment to be repaired so now i said that i need the model number on the tv to help u but most all magbavox phillips and sylvania tvs most of them are big screens u have to buy the hole board from magnavox and it cost as much as the tv did. but i will try and hp u if u get me the model number and i need to know if u turn the set on and wait 2 mins and trun it off do u see and thing on u screen at all please let me know marty

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv won't turn on. It turned off after a few minutes and won't turn back on. We opened it up and replaced the fuse.Didn't change anything. A friend said that it just seems to not be getting any...


does the power light flash three times slowly then stay off? If so chances are its just the CP150, cp120 and CP114 capacitors. There is the RCA repair kit by that same name available from www.tvrepairworld.com which has the capacitors and the CD with repair instructions

Oct 25, 2011 | RCA HD52W56 52" Rear Projection HDTV

2 Answers

I have power but it will not turn on. unplugged from power cord overnight then plugged into wall worked fine until i shut it off again, now it keeps blinking the delay light


go to turn tv on,hear a poping noise,once then tv standby lite blinks 3 times repeatily but no picture or audio.can you help me out with this thank you

Feb 14, 2010 | Sony FD Trinitron WEGA KV-36HS510 36" TV

1 Answer

Sstandby light blinks & doesn't turn on.


Unplug TV from the power outlet and let it sit for a few minutes, then plug it back. It sould work normally after that.

Apr 28, 2009 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

Tv won't power on


I trashed the set and bought a new one.

Jul 02, 2008 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

Hitachi 50UX58K-V8F001238


our hitachi did the same thing. It cost us 300.00 to tell us that there were two bad solder joints and they caused a power surge or something.

Apr 17, 2008 | Hitachi 50UX58K 50" Rear Projection...

2 Answers

Code for the one forall for a sharp tv


You do not need a code...
Heres how to set up your remete..
Turn on the devise you want to set up.
Press the set up key on the control firmly until the red light lites up and stays lit. Now press the key for the devise you are trying to set up(dvd, vcr, tv etc..).. the red light will now turn off.
Now facing the devise, begin pressing the power button several times until the devise turns off. Be careful not to press the power button any more after it turns off. After it turns off , you must immediatly press the enter key in order for the control to save the code. Now your control is set up. If this does not work , it is because you pressed the power button once more after the tv turned off....
This process might take you anywhere from 3 to 5 minutes.
despino1@hotmail.com

Jan 10, 2008 | Sharp 27C-240 27" TV

1 Answer

Takes about 5 minutes for picture to appear... Then every one to two minutes the picture disappears. It comes back on for 1 - 2 minutes then repeats. When set if first turned on, the stereo/stand-by...


Takes about 5 minutes for picture to appear... Then every one to two minutes the picture disappears. It comes back on for 1 - 2 minutes then repeats. When set if first turned on, the stereo/stand-by light (red) flashes on/off until just before picture first appears .if your tv is very old than it might be due to crt getting weak crt base loose loose contact in power supply thanks

Sep 09, 2007 | Sony KV-32S12 32" TV

Not finding what you are looking for?
Philips 55PP9401 55" Rear Projection Television Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...