- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First of all thank you for posting your question here at Fixya.com.
My first advice is to confirm if your remote control is working fine by aiming the infrared emitter(sensor) directly to your cellphone camera, while pressing any button key, you can see the flash of an infrared through your camera indicating that the remote is in good condition. Watch the video below for more info.
You are entering the right codes for Apex DVD player. And this remote control has only two 3 digit codes for Apex DVD (147 & 256).
If the two codes didn't work to your player, I would advice you to do the auto code search mode. At this state, the remote control will automatically find the compatible codes available from its memory. Follow the steps below.
> Turn on the DVD player.
> Hold down [SET] and the device you want to set (AUX) so that the red LED light goes on
> Press [SET] again. The LED will start flashing
> Press [POWER] button continuously until the DVD player turn off
> Once the DVD player turned off, press the device key(AUX) you are working with to end the setup
Please be patient while doing this steps because the remote control will try to find the compatible codes listed on its memory.
If the auto search mode didn't work also, this is an indication that this Model no. is not compatible (no compatible codes) to the remote control.