Question about Projection Televisions

1 Answer

HLM6517W 61' SAMSUNG DLP TV HAD GOTTEN 3 FLASHING LIGHTS ON FRONT SENSOR REPLACED BULB WORKED FINE THE NITE WE REPLACED IT WOULD NOT START IN AM TRIED BUT WOULD END IN 3 FLASHING LIGHTS AGAIN? IS IT NOT THE BULB THAT IS THE PROB?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

NEW BULB, NO SCHREETCHING NOISE, WANTED TO WORK BUT SOMETHING WAS NOT FIRING.... TRIED A NEW BALLAST! AND YES IT WORKS TURNS OFF AND TURNS ON!!!

Posted on Oct 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I dont have an answer yet


A number of Samsung projection TV and LCD TV had bad capacitors. There was even a class-action lawsuit (which is over). It happened to one of mine. If you open up the TV and find the control board you will fine 1 or 2 capacitors that have split on top like a little mushroom. I have them replaced and the TV woks just fine. Amazon even has kits if your a DIY person and can soder.

May 16, 2014 | Samsung HLN617W 61" Rear Projection HDTV

1 Answer

Tv shuts off after 1 min and the timer light lamp light and power light flash on and off


Hi, My samsung dlp 46 tv did the same thing, it was the lamp bulb needed to be replaced.
It is easy to replace, we replaced it twice. I paid I believe $85.00 on ebay store, discount tv lamps
hope this works!

Jun 08, 2011 | Samsung HLT6187SAX 61" DLP HDTV

2 Answers

Shuts off after a few minutes


This is a common problem for samsung DLP tvs and is due to the age of the lamp.

See this article for some solutions to extend the life, but in the end, you need a new tv or a new lamp.

http://www.ehow.com/how_4802985_fix-samsung-dlp-tv.html

Mar 07, 2011 | Samsung HL-S5087W DLP TV

1 Answer

My t.v was working now all of a sudden it comes on and all i can hear is the sound but no picture


need a new bulb shut down the tv and wait a few minutes if the light flashes red or green for a few seconds this is a code that you haveto read eg if 3 flashes then start again it means there is a problem read in between the flash code go to google put in the model number of the tv and the flash eg. hlt6187sax blinking codes

Jan 27, 2011 | Samsung HLT6187SAX 61" DLP HDTV

2 Answers

I have a 67 DLP samsung TV that recently started turning it self off after just a few minutes of being on. When it turns off about ten seconds go by then you hear a click and the two green LEDs on the...


It could be the temp sensor going bad. This sensor sits on top of the metal housing which the bulb assembly slides into. The bulb assembly will have a hole on top and this is where the sensor is above. There is a small blue and white wire that plugs into it. If you pull the wire out and put a paper clip or wire in the coupling you will basically bypass the sensor connecting the blue and white wire. If your tv turns on then that is your problem. Its cheap too. Here were my symptoms..1] Turn tv on 2] Bulb would light up..(which eliminates the ballast) regular picture would show up (which eliminates the bulb and color wheel) 3] 30 seconds later tv would shut down with 3 flashing lights. After bypass the tv turned on as always and hasnt shut down yet. Always un plug tv first. Get the replacement part to avoid overheating and possible fire

Jan 07, 2011 | Samsung HL-67A510 67" DLP HDTV

2 Answers

My Samsung DLP model HL-P6163W keeps turning on and off and now lights are flashing. We replaced the color wheel last year and about two years ago the lamp.


could still be the lamp but it could also be the Ballast for the lamp has failed. I've replaced a lot of Ballasts on DLP machines.

Nov 17, 2009 | Samsung 61" Slim-Depth DLP HDTV

2 Answers

My samsung dlp tv model#hln617w keeps turning off. Only stays on for 2 minutes. I replaced fan #2. Thunking that was the problem.


Why did you replace the fan was it noisey and did that cure the noise. These sets commonly have problems with color wheels-do you get motor noise at startup?

Sep 30, 2009 | Samsung HLN617W 61" Rear Projection HDTV

1 Answer

Samsung 61" DLP 3 Blinking lights.


all 3 lights blinking means lamp has a fault the service manual says replace the lamp. If you need the service training manual for that model let me know and I will post the link as the training manual has excellent trouble shooting breakdowns for that model DLP

Mar 26, 2008 | Samsung HLN617W 61" Rear Projection HDTV

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61292 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...