- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. Go to: http://download.aopen.com.tw/Default.aspx 2. In the drop-down menu labeled "select a product", select "Motherboards". 3. In the drop-down menu labeled "select a Model", select "AX4SPE-N". 4. In the drop-down menu labeled "Category", select "Manual". 5. Download the first item on the list: "English Manual for AX4SPE-N 6. On page 22 of this manual, there is a connection diagram for the front panel connections, which you refer to in your question.
Generally you don't need to know jumper settings in newer motherboards. What you may be referring to is the front panel i/o connector. This has the power switch, reset switch, power LED, hdd LED, and etc.
To download the motherboard manual, please go to http://download.aopen.com.tw/userdownload_List.aspx?RecNo=6027&Model=435
go to the manufacturer's website, if you know it, or google it if you
do not know the web address. Then, if you find it go to supprt and with
careful searching you should find it
If this does not work try googling your motherboard's model number
with the phrase "user manual" as a suffix, e.g. soyo sy6bb user manual
or a210dgms user manual, etc This should work.
If it has not found your motherboard try www.motherboard.org
ftp://ftp.aopen.com/pub/manual/mb/mx4bs/mx4bs-ol-e.pdf here is the manual that you needs i found it on the www.aopen.com website
it says for the front panel switches
attach the power led,empi,speakers,power and reset switch connectors to corresponding pins. If you enable suspend mode item in bios setup the acpi and power led will keep flashing while the system is in suspend mode
locate the power switch cable from your atx housing. It is a 2 pin female connector from the housing front panel. Plug this connector to the soft connector marked spwr
there is a diagram to show you how to hook it up if you need anymore hesitate plz give me a shout and i willl be able to assist you more