My NDS top screen's picture is on the bottom screen
I bought a new top screen from powergamingparts.com and the top screen's picture is on the bottom screen with the bottom screen's picture, so it is messing with the colors and I don't know how to fix it. Any advice would be helpful
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes, this can be fixed. You will need to replace the top LCD screen of the NDS, as the cable attaches directly to it. The speakers will need to be soldered to the new top LCD screen, as the top replacement screens usually do not come with speakers attached to it.
i think you have answered that question yourself but what i would do, find a game repaireshop near by, and they will repair anything to do with game consoles, it should cost too much either, so its either them or the trash or try your pot look, learn a bit more and you might probably be able to fix it yourself, dont give up just yet, believe in yourself and concentrate
you have to (obviously) open it up and solder in a new one. I've done it, but it's not trivial. I have lots of experience soldering and it went well, but I would not anticipate that someone without lots of time spent with a soldering iron will be able to do it without burning or lifting traces off the circuit board. The switch is available from many places. I bought mine here: http://www.powergamingparts.com/nintendo-ds-and-nds-lite-on--off-power-switch.html
Hi I have a problem with my bottom screen as well. I was replacing the case as the hinge was broken. When i was putting it back together i noticed a slight tear in the ribbon cable which is attached to the board and the bottom screen. When I turned it on I found I had poor colour and contrast in the bottom screen however the top screen was fine. Where this ribbon cable is attached to the board there is two small cables attached to the board beneath it, maybe one of these has come away and needs repositioning or your bottom screen needs replacing.Try this site for diy tipshttp://site.powergamingparts.com Cheers Chris