Sylvania dvd/vhs combo srd 2900 - Sylvania SRD3900 DVD Player/VCR

You can't do it without its remote control.

You should try Funai codes ( and possibly Symphonic) as these are probably the manufacturer of that set.

Check ur RCA cable setting might have a short in the cables.

you'll probably get a solution faster if you put this in the DVD/VHS combo. This is only the DVD combo

When you put the player into rewind, is it at the beginning of the tape that it ejects? If so, it may be because you have the machine in timer mode. If you have a pre-recorded tape in a VCR, it will automatically eject the tape because you`ve not to record on a pre-recorded tape. I hope this help, Ian

!st) The antenna INPUT::RF (black wire usually from "cable TV", "Dish TV", even ANTENNA air wave reception,etc.) into INPUT of VCR\DVD, OUTPUT of VCR\DVD to TV RF input.
2nd) If you have INPUT\OUTPUT to what are called " RCA " jacks on your TV, on the front or on the back, then any & all output jacks from VCR\DVD goes to INPUT\OUTPUT of the TV.
In other words:: output of audio on VHS\DVD to input of audio on TV( RCA jacks). Output of video on VHS\DVD to input of video (RCA jacks)
Hope this helps

Does anyone know how to convert a regular US dvd player into a Multi Region Dvd Player. I have a Sylvania Combo DVD & VHS Player. Thanks

my vhs/dvd combo sylvania shows error 2 how do i fix this

Even if you do get it connected you cannot copy from vhs to dvd as you have bought a vcr recorder with dvd player, not a dvd recorder. You can only record to the vcr tape from a dvd, in the players controls.