Question about Epson Stylus CX6400 All-In-One InkJet Printer

2 Answers

How do i change the ink cartridge on my epson cx6400?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

I am assuming that you already have a replacement ink cartridge.

  • Make sure the printer is on.
  • If the LCD screen says that your ink cartridge is empty than
you can simply press the Color button (the button looks sorta like a diamond with a line in the middle of it).
  • If you wanna change the ink cartridge but the printer does not say that it is empty then
press the setup button, then press the top left button until Replace ink is displayed. Finally, press the Color button.

  • Lift up the scanner section
  • Wait for ink cartridge holder to move to replacement position then open its cover.
  • Identify which cartridge you want to replace. Press in the tab to release the cartridge, then lift straight out.
  • Before unwrapping the new cartridge, shake it gently four times. Then remove from wrapper.
  • Lower new cartridge into holder, press down firmly until clicks.
  • Close cartridge cover
  • Carefully lower the scanner section and press it down until it clicks
These instructions were found in http://files.support.epson.com/pdf/cx64__/cx64__pg.pdf on pg 12.

Posted on Oct 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 94 Answers

You may refer to this link on how to change ink cartridge on your epson cx6400: http://files.support.epson.com/htmldocs/cx64__/cx64__rf/ink_4.htm

Posted on Oct 12, 2008

3 Suggested Answers

jacklee366
  • 541 Answers

SOURCE: epson cx6400. Red exlamation light is on and Printer error.

this means the wast pad is full and the printer needs to be reset let me no if you need the software to reset dont forget to rate

thank you

Posted on Dec 01, 2008

  • 1 Answer

SOURCE: Epson cx8400 Black Ink Cartridge doesn't work on Printing

I put alcohol in inside the printer, where you insert the ink cartruges then cleaned with paper towl and it works for me.....

Posted on Oct 14, 2009

cns assoc
  • 677 Answers

SOURCE: How to change ink cartridge in epsonnx110

Here is what I found on Epson Web site. Click on link below. IF YOU FIND THIS HELPFUL PLS RATE ME. THANKS AND GOOD LUCK......

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&infoType=Doc&oid=128285&prodoid=63083739&category=Products

If you need to change a cartridge before it or any other cartridges are low or expended, run the Ink Cartridge Replacement utility.

You cannot print or copy when an ink cartridge is expended even if the other cartridges are not expended. Replace any expended cartridges before printing or copying.

Leave your old cartridges in the Epson Stylus NX110 Series until you are ready to replace them to prevent the print head nozzles from drying out.

When an installed ink cartridge is more than six months old, you may need to replace it if your printouts do not look their best, even after cleaning and aligning the print head.
Follow the instructions in these sections to check and replace your ink cartridges:
Replace Cartridges Using a Printer Software Utility
For best printing results, use up a cartridge within six months of opening the package. If you need to replace a cartridge when the ink light is flashing or off (before the cartridge is expended), you can run the Ink Cartridge Replacement utility.

1. Windows: Right-click the printer icon in the bottom right corner of your screen (the taskbar) and select Printer Settings. Click the Maintenance tab.
Macintosh: Open the Applications folder, open EPSON Printer Utility3, select your printer (if necessary), and click OK.

You see one of these screen SEE ATTACHMENT BELOW
ee2c8db.jpg
2. Click the Ink Cartridge Replacement utility icon and follow the on-screen instructions to replace your ink cartridges as necessary

Posted on Jan 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you tell me how to change ink on an epson stylus cx400


The Epson Stylus CX6400 is an all-in-one printer that also features a scannermag-glass_10x10.gif for scanning and copying. The Epson CX6400 prints with ink via four separate ink cartridges in black (high or standard capacity), cyan, magenta and yellow. The cartridges sit in slots in a cartridge holder underneath the scanner. As cartridges run low, or cartridge print quality problems arise, ink cartridge replacement become necessary. As each cartridge snaps effortlessly into the cartridge holder, changing cartridges doesn't require much effort beyond unsnapping the old cartridge from the holder and replacing it with a new one. jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Instructions
  1. Step 1 Turn on the CX6400.
  2. Step 2 Check the ink levels for each cartridge. Press the "Setup" button to enter the setup mode. Press the topmost button on the left side of the LCD repeatedly until you reach the Ink Levels screen and then press the "Color" button to see the ink level percentages (for example, 0 percent or 50 percent) scroll across the screen for each cartridge (C for cyan, M for magenta, Y for yellow and K for black). Press the "OK" button to exit.
  3. Step 3 Select the empty cartridge or low cartridge option on your printer. If you're dealing with one or more empty cartridges, press the "Color" button. If you've decided to replace low ink cartridges, press the "Setup" button, press the topmost button on the left side of the LCD repeatedly until you reach the Replace Ink screen and then press the "Color" button.
  4. Step 4 Reach into the slots on both sides of the printer under the scanner unit. Lift the scanner unit up carefully to reveal the cartridge holder on the right side of the printer. Lean the scanner back to rest on its hinges.
  5. Step 5 Grip the unhinged end of the cartridge cover near the back of the printer and then pull the cartridge toward you. If this is done correctly, the cover should flip back and hang slightly out from the printer on a hinge.
  6. Step 6 Press your fingertip against the grooved tab on the cartridge that you're changing to unlock the cartridge from the holder. Once it is unlocked, pull the cartridge straight up and out of the printer and set it aside for disposal.
  7. Step 7 Shake the new replacement cartridge in its sealed packaging four to five times using a rapid side-to-side motion and then remove it from the packaging without touching the green circuit boardmag-glass_10x10.gif.
  8. Step 8 Insert the replacement cartridge in the holder and push down on it until you hear the grooved tab click, locking the cartridge in place. Remove and replace any other cartridges as needed.
  9. Step 9 Flip the cartridge cover over the cartridge holder and push down on it to lock it in place. Grasp the sides of the scanner unit and lower it gently into its previous position. Wait for the "Charging" message to disappear from the LCD and then begin printing.

Read more: How To Change Ink Cartridges for an Epson CX6400 | eHow.com http://www.ehow.com/how_6656725_change-ink-cartridges-epson-cx6400.html#ixzz0tZtUa2CB

Jul 04, 2010 | Epson Stylus CX6400 All-In-One InkJet...

1 Answer

Hi, my cyan cartridge has ran out of ink and now it wont let me print until its been replaced even though im printing in black and white? and advice?xxxx


Epson will not let you print unless you have all the cartridges in with ink. Even though I was printing in Black, I noticed all my cartridges were running out of ink, so I sent Epson an email. Got a response, and they explained, that it has to have in all cartridges.
Weird eh? Crooked, if you ask me.

Good Luck.

Nov 04, 2009 | Epson Stylus CX6400 All-In-One InkJet...

1 Answer

I put new ink cartridge and is not printing


clean cartridge if you are not active print docoments then change printer head

Oct 31, 2009 | Epson Stylus CX6400 All-In-One InkJet...

1 Answer

I was changing an ink cartridge on my epson cx6400 and it stopped at the chearge step. Now all that happens is an 'error mesage and nothing works. I have rebooterd the computer and the printer. Thanks


have you tried installing and reinstalling your ink cartridges?, if so their might have been a physical defect on the ink cartridge itself, this may occur if the inks you installed are 3rd party ink cartridges where the handling is not that good

Oct 15, 2009 | Epson Stylus CX6400 All-In-One InkJet...

1 Answer

Acts like it's printing, ink is good, but nothing prints out on paper.


Nothing at all? Poor you are. The pump may damage or lost electricity.

May 31, 2009 | Epson Stylus CX6400 All-In-One InkJet...

1 Answer

Nothing prints out on paper.


Did you remove the little sticky tabs from each new cartridge? They allow air in, and ink out.

May 31, 2009 | Epson Stylus CX6400 All-In-One InkJet...

1 Answer

Acts like it's printing, ink is good, but nothing prints out on paper.


Have you removed the tear off tape from top of cartridges, it lets the air in and ink flows.

May 28, 2009 | Epson Stylus CX6400 All-In-One InkJet...

2 Answers

Won't rege ink


how to reset ink cartridge for epson stylus cx6400 I have 2 sets of cartridges half full of ink and it will not print it just keeps saying out of magenta

May 16, 2009 | Epson Stylus CX6400 All-In-One InkJet...

1 Answer

Epson Stylus CX6400 All-In-One InkJet


try doing 4 head cleans and then leave the printer powered up over night. Don't print or anything else after the head cleans until the morning then do one more head clean (this soaks the print head in ink overnight and then the final head clean should clear any obstruction. If the printer still refuses to print in colour, you could try replacing the cartridges anyway as they can be faulty. The only problem is thaty sometimes it's cheaper to buy a new priner. (how silly is that!) By the way, are you using compats or epson original ink carts?

Nov 03, 2008 | Epson Stylus CX6400 All-In-One InkJet...

2 Answers

Ink Cartridge


Some of Epson's cartridges went bad that way. It may be a bad cartridge. Get a new one, pull that one out and see what happens. If it works, call Epson for a refund. They had a class action suit for that type of thing, they lost and paid off. I would think they will help you right away.
C

May 31, 2008 | Epson Stylus CX6400 All-In-One InkJet...

Not finding what you are looking for?
Epson Stylus CX6400 All-In-One InkJet Printer Logo

1,101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...