Question about Lexmark Printers & Copiers

1 Answer

While installing my wireless printer,I had connetivity problems .Now that is solved how do I proceed in completing my install

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 352 Answers

Updating your printer drivers:

Create a new folder on your desktop and name it newhpdrivers(substitute your manufacturer in new name). Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop. Power down your computer. Reconnect the printer to the computer and turn printer on. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done


anaanymous

Posted on Oct 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I get total pages printed off HP Pro 8610? I am on Windows 8. Thanks,


When you did install the correct HP programs that came with the printer I think it should work. Uninstall the olde HP programs and doe a complete reinstall, before reconnecting the printer. That should solve the problem.
Always FIRST install the software, then connect the device to the computer.

Mar 28, 2015 | HP Officejet Pro 8610 Wireless All-in-One...

2 Answers

Vista driver


The print driver solution for this product is included with the Microsoft Windows Vista operating system and is already on the computer. No special driver download is necessary for this product.
Please follow the simple instructions below to easily get the product working with Microsoft Windows Vista Operating system.

Installation Instructions

Direct Connection (Parallel & USB connector)

  1. Verify that the printer is turned ON.
  2. Connect the Universal Serial Bus (USB)/ Parallel (IEEE 1284) cable to the printer and to the computer
  3. Click on the Close button when the message "Your devices are ready to use" is displayed in the screen.
  4. The printer is now ready to accept the print job.

Wired Network & Bluetooth Connection

note.png
NOTE:For Bluetooth connected printer, please ensure that the printer's access mode is set to public mode for detection.
  1. Verify that the printer is turned on.
  2. Click Start > Control Panel and then select Printers .
  3. Click on Add a printer .
  4. Click Add a network, wireless or Bluetooth printer . A list of detected wired network or Bluetooth printers will be displayed.
  5. Select the printer you want to install and click Next . Follow the on screen installation instruction to complete the printer driver installation.

Wireless Connection

  1. Verify that the printer is turned ON.
  2. Ensure the printer's wireless network setting is set to the correct wireless profile matching the local wireless network/computer's wireless card setting.
    If you have previously configured the printer's wireless network setting, matching local wireless/computer's wireless card setting, please proceed to step 3.
    if you have NOT previously configured the printer's wireless network setting to match local wireless network/computer's wireless card setting, please follow the steps below.
    To set wireless network settings in an infrastructure network
    Connect the printer to the computer with the cross cable (included with the printer) or connect the printer to the network with a network cable.
    Press the configuration button once to print a configuration page.
    Open web browser, and type in the IP address that has been assigned to the printer.
    Configure the printer's wireless setting to match local wireless network/computer's wireless card setting.
    Unplug the cross cable/network cable.
    Activate the printer wireless network, activate the computer's wireless network profile.
    Proceed to step 3.
    To set wireless network settings in an ad hoc network
    Do the following to reset the printer's network settings:
    1. While pressing the Configuration Page button, press (Resume button) three times.
    2. Wait about 20 seconds, and then press (Power button) to turn off the printer.
    3. Disconnect the power cord from the printer.
    4. Wait about 20 seconds, and then reconnect the power cord.
    5. Press (Power button) to turn on the printer.
    6. Open the configuration utility for the computer's wireless network card, then create a new wireless profile with the following values.
      • Communication mode: ad hoc
      • Network name (SSID): hpsetup
      • Security (encryption): disabled
    7. Activate the wireless profile.
    8. Wait two minutes for the printer to obtain an IP address, then print a wireless configuration page to verify the following for the printer's network settings.
      • Communication mode: ad hoc
      • Network name (SSID): hpsetup
      • The IP address is NOT 0.0.0.0
    9. If one of the above conditions is not true then repeat the preceding steps. Proceed to steps 3 below.
  3. Click Start > Control Panel and then select Printers .
  4. Click on Add a printer .
  5. Click Add a network, wireless or Bluetooth printer , a list of detected printers will be displayed.
  6. Select the printer you want to install and click Next . Follow the on screen installation instruction to complete the print driver installation.

Dec 15, 2013 | HP DeskJet 450wbt InkJet Printer

1 Answer

I want to install the program HP PSC series 1410


Since you want to install the printer software/program to your computer and if you don't have the setup disc for it what you can do is to download the printer software from this link and then run it to install the complete software for the printer to your computer.
Just click HERE and proceed with the download of the software and once done run it to install the complete software for the printer.

Mar 04, 2011 | HP PSC 1410 All-In-One InkJet Printer

1 Answer

I just bought this HP Officejet 6500 Wireless All-In-One Inkjet and I completed the installation and I can't get the printer to print via the computer nor the fax to work. HELP!!!!!! Before I take it back!


There are two explanation for your issue. The printer might not be installed properly through your network because of firewall, anti-virus or spyware or the printer might need to be installed first through usb connection then wireless connection. If your printer falls in the first issue then I would suggest to uninstall the printer software first before reinstalling it. Before proceeding with the installation turn off the firewall, anti-virus and spyware. connect the printer to your network first then proceed with the installation process. If this would not resolve the issue then you need to uninstall the software again and reinstall first throught usb connection. After successful installation reinstall the printer to your network. It should work.

Oct 26, 2009 | HP Officejet 6500 Wireless All-in-One...

1 Answer

Printer Installation Failed Lexmark Z2320


I 've lexmark printer z2320, and I've download softwer from internet, but after installed, not appear the driver of z2320 but z2300, i want to download the driver propely

Apr 19, 2009 | Lexmark Z2320 InkJet Printer

1 Answer

INSTALLATION OF EPSON SX600FW


http://support.epson-europe.com/onlineguides/en/sx600series/html_z/p03.htm

this is the web site that explains how to connect to the network. i hope this helps.

please rate good.

Mar 01, 2009 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Canon Pixma MP190 will not install on my computer.


i just bought these printer pixmamp190 and i cant get it to work it says that it is not conneting to try again and i do it still wont work.

Jan 17, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Install Hp F4185


you have to put the driver cd which come with the printer, then click on install then follow the instruction on the screen when it ask you to connet the printer then only connet it to pc,then rest you follow the instruction

Jun 25, 2008 | Printers & Copiers

1 Answer

PC won't detect MFC-210C Printer


TRY THIS, remove or uninstall the printer from your computer and turn it off.

Now, before you switch back ON the computer, remove the USB connection of your printer.

When the computer is done loading. Install the Printer using the CD that comes with the printer.

When the installer ask you to insert the USB connection of the printer,
that's the only time you should insert it to the USB port... switch ON the printer... Installation should proceed smoothly until completed.

That should solve your problem
.

Jan 21, 2008 | Brother MFC 210C All-In-One InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...