Question about LG WM-2277HW Front Load Washer

1 Answer

LG Font Load Washer flashing error code FE - LG WM-2277HW Front Load Washer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,543 Answers

FE is Fill Error. If door is closed and washer is plugged in, FE means water is too high and water pump will turn on.

This happens most often when a water fill valve will not shut off completely, allowing water to continue to fill washer, sometimes very slowly. If you shut off one valve (where the hose comes from the household plumbing) at a time you may be able to tell which valve is the culprit. The hot is a single coil valve, the cold is a multi coil valve. Both are the part where the hoses connect onto the machine.
To access valves, remove 3 phillips head screws at the back of the washer holding the top cover in place. Slide the top back about two inches and lift it off.

Posted on Oct 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Front load washer LG wm2140cw with error code up side down FE. Any ideas what this means? Will start to run then error code shows up and it stops.


A tE error code on the display of the washer indicates a heating error, usually caused by a faulty thermistor.
  1. Unplug the washer from the power outlet for 10 seconds.
  2. Plug the washer back in and press the POWER button and then the SPIN SPEED button until No Spin is selected. Press the START/PAUSE button.
  3. Once the washer has drained, restart the wash cycle.
  4. If the tE error code appears again, close the water taps and unplug the washer. The washer will require repair service.

Apr 06, 2015 | LG Washing Machines

2 Answers

Code fe on lg what does this mean


This fe error or fault code indicates that the washer is overfilling due to a defective water inlet valve. The valve is not repairable and will need to be replaced.

Mar 01, 2014 | LG WM-2077C Front Load Washer

1 Answer

LG front load washing machine WM2233H Error code is FE


I found this information on the internet. I hope that it helps.
" Getting fe code on lg washer.
"This means that the washer is overflowing. This is a built in fault that turns on the drain pump so that the water doesn't get so high that it gets into the floor. If water is continually flowing into the washer you will get this problem. If this is the case the water valve is most likely the problem. To confirm unplug the washer and if the water doesn't stop flowing into the washer the water valve is the problem.

Thank you,
Shawn"

I hope that this helps you out

Apr 21, 2011 | LG WM2233H Front Load Stacked Washer /...

1 Answer

My LG washer TROMM displays the code FE what does that mean?


Overflow error.
Water level frequency is over 213
If FE is displayed the drain pump will kick in to prevent flooding.
Might be a bad water valve OR it could be a clogged water pressure tubing (from tub to control)

Your tech service manual and some notes are HERE

Oct 19, 2010 | LG WM1812C Front Load Washer

1 Answer

Error code FE


From the manual ,FE means Water level is too high due to a faulty water valve. hence the possible leak

Dec 22, 2009 | LG WM2277H Front Load Washer

1 Answer

WASHING MACHINE DOES NOT GO ON


Check your display panel again- there is no such error code for the LG WD-3245RHD. You can have: "dE", "tE", "FE", "PE", "CE", "LE", or "dHE" but there is no "D5" error code.

Aug 24, 2009 | LG WD-3245 Front Load Washer / Dryer

1 Answer

LG Sense Clean DD error code "FE" front loader washer/dryer combo


my lg senseclean wash mashine shows the sign Cl on the display and the door cannot be open what does it mean?

Jan 03, 2009 | LG 4.0 Cu. Ft. 7-Cycle Front-Load Washer -...

1 Answer

FE code displays


Yes, the water valves are easy to locate and replace.  Just remove the top panel to get access to them.  There are 2 of them.  You need to know which one to replace before ordering the correct part from LG.

Mar 05, 2008 | LG WM2277H Front Load Washer

Not finding what you are looking for?
LG WM-2277HW Front Load Washer Logo

1,081 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...