Question about Flat Panel Televisions

1 Answer

Factory Reset for JVC LT-32X18 Initial Power On

I had opened a problem last night with a support guy called "welcomejee" but the Laptop I was using flaked out on me, Girlfriend's son's.??? What I need is to get the TV back to the factory default for initial power on. The manual intructs you to choose either Area 1 or Area 2 and then there are different options and procedures for what Area your in. The big problem is the manual doesn't really give you any real information about differences between the two. Area 1 looks like mainly US and Canada but Area 2 is Russia, Eastern Europe and SouthEastr Asia. Since I am in the United Kingdom I went with Area 2 as it defaulted to it when that screen was displayed but now I can't get it to autoscan and find any channels and you can only manual search and fine tune using the Area 1 option. This is a multi-system TV connected to a SKY Plus Digital Cable box via a coax cable from the RF1 Out port to the back of the flat screen. I'm an IT guy with a company called General Dynamics and have lived here in the UK for 11 years, I'm familiar with Video setup and know how to tune in a TV over here and what connections are required, my only problem is I don't know how to get this particular JVC TV back to origianal factory settings so I can start over with the Area 1 option as the Area 2 won't find any channels and after troubleshooting it it seems the solution is to use Area 1.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Try a hard reset first - Unplug TV from power source and remove all cable for about an hour. Then reconnect everything and see if it works..Let me know how it goes.

Posted on Oct 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my Jvc the screen won't power on. When I reset it the lights on the buttons light up...but shut off right away. It has power because the red light on the bottom left corner stays lit.


JVC LT-46AM73 LCD TV Won't Turn On - YouTube

? 3:28
https://www.youtube.com/watch?v=y5j3RGUe4gM
Feb 25, 2015 - Uploaded by Awesome Things
JVC LT-46AM73 LCD TV won't turn on after power outage. ...LCD & LED TV Repair - No Image & Blank Black ScreenFlashlight Test - How to ...

JVC wont turn on - JVC - Streaming Video & TVs

www.tomsguide.com/answers/id-1677424/jvc-wont-turn.html
May 15, 2013 - JVC lcd tv will act like its turning on then the green light after 2 seconds ... wont turn on Forum; SolvedAcer Laptop V4DA2, screen won't turn on.

My Jvc Av-32F476 Tv Won't Power On, The Green On Timer Light Stays ...

www.diyforums.net/my-jvc-av-32f476-tv-wont-power-on-the-green-on-...
Dec 8, 2013 - My jvc av-32F476 tv won't power on, the green on timer light stays on and m. ... On the remote control, look for the buttons PICTURE MODE and DISPLAY, with ... My Jvc Lt24dd52j Won't Turn On The Blue Light Is Flashing But ...
Nov 1, 2014
I Have A JVC LT-42TG30J, Randomly The Tv Has Decided It ...
Aug 29, 2012
I Have No Picture On My 47 Inch On My Jvc Big Screen Just A ...
May 23, 2012
My Dynex 42" Wont Turn On Power Led Is Lit Up But It Won't C ...
May 24, 2011
More results from www.diyforums.net

Jan 18, 2016 | JVC Flat Panel Televisions

1 Answer

JVC lt-42e478 HDMI No Program or Weak Signal, AV works {blurry and oversize}


Nope sorry this does sound like your control board is naffed and needs replacing , it sees the avi as no rf input is needed but will not switch to if to give you vision chroma and sound .

Jul 02, 2015 | JVC LT-42E478 42 in. LCD Television

2 Answers

Factory reset press


Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset
with a lock code of 0000 You may change the code to any four-digit number you wish. To
change the lock code, follow the steps below.
Press the MENU button
To "Initial Setup"
To enter
To "Set Lock Code"
To operate (Password input screen will appear)
Enter the password by using the 10 button
keypad
The Set Lock Code screen will appear
To set the password, use the 10 button keypad
Press the OK button to finish your lock code is now set

Oct 15, 2013 | JVC LT-32E488 32 in. LCD Television

1 Answer

I have a jvc lt-32a220 flat screen and won't power


Power supply or microprocessor in the set---have you tried to unplug set and or box if used from power for a while and then power back?

Do I understand it is a new set?

Dec 09, 2012 | Flat Panel Televisions

1 Answer

Hello my TVC LT-47X579 wont come on the blue power light just flashes after a few seconds


Unplug,replug the tv about hour,the tv should reset itself back to factory setting.The tv should work now,not than the power supply board is dead.That the board,where the power a/c power cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Sep 05, 2010 | JVC LT-42X579 42 in. LCD TV

1 Answer

JVC LT-42E488. No picture. JVC logo comes up for a few seconds.


A firmware update might fix it. Call an authorized servicer, explain the symptom.

Jan 16, 2010 | JVC LT-42E488 Television

1 Answer

No Picture


I am deeply sorry but you will need to replace the backlight bulbs. These are not available.

Look on Ebay for a 32" JVC with a broken LCD Screen. Buy it and use these bulbs to fix your TV. I am sure there will be a few good ones in the broken TV. It's that or list it on Ebay for $50 and expect to get about 200-300.

LCD Panel repair for this problem is $500 for parts so you are stick with repair yourself or sell.

May 27, 2009 | JVC LT-32E478 TV

4 Answers

JVC LT-32P679 Blinking Power Light, Automatic Shutoff


1. Hold [menu] and [vol-] button on the side of the TV
2. while holding these, press the [power] button on the side of TV (NOT remote)
3. blue light comes ON and stays ON
4. wait 10 seconds then let go of [menu] and [vol-]
5. wait another 30 seconds and some type of picture should appear

I think this is right. I got it from the JVC call centers guys so sorry if I missed or messed up a step.

Mar 17, 2009 | JVC LT-32P679 32 in. LCD TV

2 Answers

JVC LCD TV LT-42X688-powers on, blank screen. no picture,no sound


Hi , I have the same problem with my LT-42X688,so i called the service of my extended warranty provider . the TV technician just left and told me the motherboard is the problem. he said its the third one this week he has seen with the same symptoms. he ordered the motherboard and i've got to wait 5 to 7 work days before the part will be in . I will keep you posted when the guy will return.

Jan 02, 2009 | JVC LT-42X688 42 in. LCD HDTV

1 Answer

JVC LT-Z37 SX5


is the power cord good leave it disconect over night try it in the morning or power bar those thing are not good for life hope it work take care cheers

Jan 17, 2008 | JVC LT-37X776 37 in. LCD HDTV

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...