Question about D-Link AirPlus DI-524 Wireless Router

4 Answers

I wana put security code on my router what should i do?? no 1 can use this without my parmition...??

Posted by on

  • 1 more comment 
  • ana_l7aly Oct 15, 2008

    guys next door are using my router to download movies and it makes my connection down

    how can i put a code for my wirless router

  • Anonymous Nov 16, 2008

    I am also having similar problem and running out of download quota as next door using my quotas. When I initially set up then I put the new SSID name with secured with WEP key. But recently I have had to manually reset the router to fix other problem and since I couldn't set the new SSID and WEP key for security. Everytime I attempted it asked me to enter user name and password and when I type in user being "admin" and leave blank for password the router doesn't recognise it and keep asking for the same. I also tried by allocating a password still it doesn't recognise my password. Could you help? Appreciated.
    Debannya

  • Anonymous Apr 26, 2009

    i cant put in a passwrd and i have to put i the security code to make a password but i dont know o look what should i do?

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 166 Answers

O.0sorry but wtf u need the ssid for?u just need to open up a intenet browser and type in 192.168.1.1 and you need to be physicaly connected to the router.and when you connect to it the log in info is usually id=admin password=password.thats the way my netgear was setup.also on some routers it tells you the info on the back of them.this website actually tells you pretty well how to assign a wep,ssid,password,and other things. http://resnet.uci.edu/routersetup.asp...i hope this has helped and cleared up the question that should have been easy to answer.

Posted on May 11, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 22 Answers

If you are not using the wireless part I highly recomment disabling the wireless part. Just log into your router web console, click on the wireless button, and select disable. If you are using it you can enable the security, change the SSID, and disable the broadcast of the SSID.

Also, be sure and change the default admin password. Write down the new password and store it in a safe place. If you ever forget it your can reset the router.

Posted on Oct 17, 2008

Whats the ssid..

Posted on Nov 02, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need to know how to put a security code on my router

Posted on Mar 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How Do I get the Security Code


Here is a link where you can view the manual. If you follow the procedures to reset your router (page 5-7 top and page 7-7) then you can use the default username and password along with all the default settings. "To restore the factory default configuration settings without knowing the administration password
or IP address, you must use the Default Reset button on the rear panel of the router.
1. Press and hold the Default Reset button until the power light blinks on (about 10 seconds).
2. Release the Default Reset button and wait for the router to reboot.
If the wireless router fails to restart or the power light continues to blink or turns solid amber,
the unit may be defective. If the error persists, you might have a hardware problem and should
contact technical support.
"Once you are able to log back on, you can configure it the way you want. :http://www.netwood.net/support/manuals/Netgear_WGR614v6_ref_man_20Apr05.pdf

Sep 13, 2014 | NetGear WGR614 Wireless Router

2 Answers

I forgot my pass word and want to change it. My daughter put in her security pass word and can't remember it for a wireless-G 2.4 GHz Broadband rouuter.


Hello
You can do a factory reset.
1 unplug all cables to router.
2 Hold down small reset button behind router,use a pen tip to hold this button in for 30 seconds.
3 Reconnect cables,power cable first.
4 Log into router using default password and username.Which should be......


username=admin
password=password or admin
Once loged in you can reset your username and password to what you want.

Oct 13, 2011 | Linksys Wireless-G Broadband Router

2 Answers

How do i put a password on my lantech wirless router, i am looking to password protect my wireless internet and dont know how to do this. please help


Hello
Open up your web browser and type 192.168.1.1 in the address bar,hit enter.

A small sign in box will appear.
username = admin

password = password or admin

once in the routers homepage navigate to security settings and choose the use a password option.
Put in your password and username.You may want to write it down in case you forget.

Jan 18, 2011 | Routers

1 Answer

I need to put a pass code on my router so neighbors are not using my internet can you help me


This isn't too hard if you take it one step at a time. .
  1. First, get your user guide or download it from here.
  2. Log on to your router per the instructions on page 14 with "Contacting your Router"
  3. Skip to page 16 and perform step 1
  4. Click on SECURITY and skip to page 19.
  5. To keep this easy, choose WEP, Key 1, and generate the key.
  6. WRITE DOWN KEY #1 as you will need this when you connect your PC. Click APPLY.
. Your router is now secure. When you try to connect your wireless PC it shoud now bring up the security screen. Change the security scheme to WEP, key #1 and type in the code from step 6. . Good luck!

Jan 13, 2011 | Gateway Wireless-G WGR-200 Router...

2 Answers

Need help with wlan code


Security Code is configued in Wireless Router itself.

Please open your Wireless router Admin Panel in Internet Explorer. Please follow this steps.

1. Open Internet Explorer and type : http://192.168.x.x and press enter (x is router IP. Generally its 1.1 or 0.1)
2. Go to Wireless Security Tab and look there for Security code.

Now type that Security code in your Ps3 .

You find all details regarding to access router in internet explorer from Product Manual. (you can download product manual from Manufacturer site)

Mar 22, 2010 | Belkin (F5D7230-4) Router (587009)

2 Answers

I have a qwest modem how do i put a lock so other people dont use my internet


You want to secure the wireless network.
Is there any computer connected to the router with the Ethernet cable?
If not then you will need to connect the computer to the router with the cable.
Check the IP address on the computer. Open the router set up page.
Once you open the set up page, you will find the option to make it secured

Click Here for step by step instructions

Jan 19, 2010 | D-Link AirPlus DI-524 Wireless Router

1 Answer

I wana know if i can reset my router password without restarting the router to factory settings


Yes, If you know the routers' administration password, you can log in to the administration settings and change the password. If you are asking if you can change it without knowing the admin password, not likely.

Nov 07, 2009 | Routers

1 Answer

What does the wireless botten look like? i just got wireless today and i just kant find it i dont alwayz wana use the cord to get on the interent


You will need a network cable to attach the wireless router to your computer to set it up. You want to enable security to block others from using your connection (read your manual). Once that is set up, you can disconnect the cable from the router and computer.

In the system tray, lower right of screen, look for an icon of a monitor with or without a red "X". Right click on it and select "View available wireless connections. Choose yours and connect. Type in your security KEY and you will be connected wirelessly to the router.

Jun 23, 2009 | Acer D-Link 2.4GHz Wireless Router 802.11b...

1 Answer

Connecting to a secure wireless router


Try & put a "$" sign (without quotes) at the beginning of the enryption code.

Mar 17, 2009 | Belkin Wireless Cable/DSL Gateway Router

2 Answers

How to change the security code of router


type in the internet explorer http://192.168.1.1  type in the username and pswd or try to put "admin" and password as "password"  if it does't work , find the router manual or see the back of the router to locate the username & pswd...

Jan 02, 2009 | Belkin N Wireless Modem-Router F5D8633au4A

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

Related Topics:

2,715 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...