Question about Quasar VV-1302 13 in. TV/VCR Combo

Open Question

Quasar tv vcr combo

I need to program it with a universal remote but i dont know how!

Posted by on

6 Suggested Answers

  • 579 Answers

SOURCE: Quasar 13" TV/VCR lost remote cannot find menu

You must buy a universal remote and be sure and get one that has a menu button on it.

Posted on Dec 31, 2007

premtech
  • 934 Answers

SOURCE: quasar tv

Try this site:
http://www.remotecodelist.com/remotes/

Bill

Posted on Feb 09, 2008

SOURCE: Older Quasar Video TV combo Model UU1220AW, SN VSOS1226

can you please send me the tv vcr combo code for my philips remote, to the old quasar tv. thank you Genef9@yahoo.com

Posted on May 23, 2008

  • 23 Answers

SOURCE: Quasar 13" tv/vcr combo

Standard universal remotes rarely work well with combination devices. Try programming the TV part in the TV mode and the VCR functions in the VCR mode. If this doesn't work you may be out of luck unless you get a logitech harmony remote. You might be able to find one on ebay for about $50. Depending on the model the usually run $150 - $1000. These remotes need to be set up with a computer but the program is pretty strait forward. This is the only remote that I can guarentee will work.

Posted on Apr 24, 2009

  • 4234 Answers

SOURCE: No Remote control

A fairly common problem with these sets is that the connections to the IR receiver inside the set degrade. Quite often all that is required is a resoldering of the pins of the receiver. This is a 3 legegd part within a small metal box located near the fron of the TV. If you have no experience with TVs, do not attempt this. I would guess that a TV shop would be willing to resolder the pins on this for not much money. Call and ask. It might be a cheap fix for you. Cleaning the lens of the remote will have no effect.

Dan

Posted on May 07, 2010

Testimonial: "Thank you for the information. I did talk with a repair shop and they told me that it would do no good to us a universal remote on these combo tv's as they wouldn't work anyway. Only solution is to find a orginal remote. "

caroldon
  • 17129 Answers

SOURCE: I have a Quasar tv/vcr

Sometimes the universal remotes do not compromise fully with certain models especially with combo models.
So you might a different type of universal type to connect with the Quasar codes, but it is ideal if there is the model mentioned in the manual of the remote.
Volume and channel working is what is most important and should be considered good enough.

Posted on Sep 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A QUASAR VV2008 TV/VCR COMBO AND I DONT HAVE REMOTE AND CANT GET TO NO CHANNELS EXCEPT 60 AND LINE


The remote model number for the Quasar VV2008 is VSQS1570 and can be ordered from Panasonic at 1-800-221-7262 or Go to a Family Dollar store and purchase the grey RCA universal remote for $6.00 about 6 inches in length. When you are ready to program it for the Quasar VV2008 push the code search button then the VCR button and enter 0162 then push enter. The red light should go off and the remote should turn the TV/VCR off and on. It worked for me 4/19/2013

Apr 12, 2011 | Quasar VV-2002 20 in. TV/VCR Combo

1 Answer

I have a Quasar tv/vcr combo, model VV2007, I have no remote and bought a RCA universal remote and none of the 3 codes work, the most I can get out of it is channel and volume, I need to add channels but...


Sometimes the universal remotes do not compromise fully with certain models especially with combo models.
So you might a different type of universal type to connect with the Quasar codes, but it is ideal if there is the model mentioned in the manual of the remote.
Volume and channel working is what is most important and should be considered good enough.

Sep 14, 2010 | Quasar VV2007 20 in. Combo

1 Answer

Quasar 13" tv/vcr combo


Standard universal remotes rarely work well with combination devices. Try programming the TV part in the TV mode and the VCR functions in the VCR mode. If this doesn't work you may be out of luck unless you get a logitech harmony remote. You might be able to find one on ebay for about $50. Depending on the model the usually run $150 - $1000. These remotes need to be set up with a computer but the program is pretty strait forward. This is the only remote that I can guarentee will work.

Apr 24, 2009 | Quasar VV-1302 13 in. TV/VCR Combo

3 Answers

Older Quasar Video TV combo Model UU1220AW, SN VSOS1226


can you please send me the tv vcr combo code for my philips remote, to the old quasar tv. thank you Genef9@yahoo.com

Apr 20, 2008 | Quasar VV-2002 20 in. TV/VCR Combo

1 Answer

Quasar vv2020 remote codes


Quasar tv/vcr 0374 0381 0035 0162

These are the only ones I found for the combo's

Mar 18, 2008 | Quasar VV-2002 20 in. TV/VCR Combo

1 Answer

Quasar VH5280...


Check first 0000, 0374 0381 0162 0035
need to know which remote your using?

Mar 07, 2008 | Quasar VV-2002 20 in. TV/VCR Combo

1 Answer

Quasar 13" TV/VCR lost remote cannot find menu


You must buy a universal remote and be sure and get one that has a menu button on it.

Dec 31, 2007 | Quasar VV-1302 13 in. TV/VCR Combo

1 Answer

Quasar tv


for tv only try 003,054, 070 for vcr try 021,022,125

Sep 20, 2007 | Quasar VV-2002 20 in. TV/VCR Combo

Not finding what you are looking for?
Quasar VV-1302 13 in. TV/VCR Combo Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Quasar Combination Televisions Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Quasar Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...