Question about Panasonic PanaFax UF-490 All-In-One Laser Printer

2 Answers

Resetting lbp fuser

Hi, printer error 021 shows on the machine, read that fuser reset shall be done. how is resetting done?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 284 Answers

You need to do a lbp fuser reset and lbp error log clear
-----------------------------------------------------------------
fuser reset

function- 7- monitor button 4 times slowly- then press * "start" button, should say service mode, then press 7- start- down arrow - start- then yes

log clear

function- 7- monitor button 4 times slowly- then press * "start" button, should say service mode, the press 6 - use the down arrow to get to lbp log clear.

if this does no work you need the fuser replaced

good luck

Posted on Nov 24, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The machine dp8060 shut down after fuser reset but don't turned on, what can i do?

Posted on Jan 12, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dell 3115cn printer will not connect to the network (it still works on USB cable), hard to believe it's broken, so can the printer system be reset?


Try turning off the printer and disconnecting power plug from wall. Hold power on button for about a minute. Then replug unit and turn power on - it should then attempt to hook up to your existing network.

If no go, try reinstalling the software that initially came with printer and was used to set up the network

Jan 10, 2017 | Dell Office Equipment & Supplies

1 Answer

HOW DO I un-lock the scanner on a Brother MFC 7420?


Unfortunately, the MFC-7420 doesn't have a physical lock switch. You need to turn off the all-in-one and wait for the unit to clear its memory. If the error recurs after you press the power button again, wait 30 minutes and try again. (Note: you will lose any faxes that are in memory. See the User Guide page 11-5 to save this information.) You can find the manual on the Brother support page for the MFC-7420: https://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7420 . Click on the Manuals & Documents tab. Then click on the Manuals on our Online Solution Center for the English version of the manual. The direct link to the User Guide is currently: http://download.brother.com/welcome/doc000387/ALLFB_UsaEngUsr_B.pdf .

You can also try unplugging the all-in-one for several minutes to reset the error codes. If the error persists, contact Brother if the MFC-7420 is still under warranty (1 year). If it isn't under warranty, consider replacing the unit. The repair costs may be unreasonable.

I hope this helps.

Cindy Wells

Jan 09, 2017 | Brother MFC-7420 Printer

1 Answer

Sharp ar gives me error number h4 how to let it work again


The error H4 stands for the heater roller H3 (Fuser) temperature is low and probably burnt out. You need to call for service.

Jan 08, 2017 | Sharp Office Equipment & Supplies

1 Answer

Bizhub C250 using to much toner. Images are very dark. Ink can even be rubbed off pages. How do you adjust?


Check that the fuser is not in enevople mode. two green handle up not down. check the files

Oct 28, 2016 | Konica Minolta bizhub C250 All-In-One...

1 Answer

My printer brother dcp7065dn disply 71 and72 error


This is codes for the ink cartridge. The code means there is a problem with the cartridge. Change them both and restart the machine.

Jan 13, 2015 | Office Equipment & Supplies

1 Answer

We have forgotten the Administration password for our EStudio 350 & 450. Is there any way of resetting? Thanks Ben


The default password is either 12345 or 123456.
If neither of those work then, turn machine off then power on while pressing the 0 & 8 keys then enter 263, then press Start. It will then display the Admin Password.

Mar 17, 2014 | Toshiba Estudio 200L Copier

1 Answer

Hp laserjet m1522f error 5 turn off and on


Hi, Error 5 is a Scanner error. When turning the printer on, have the lid up so you can watch the scanner movement. Does it move smoothly? It should go through a warm up and you should be able to watch the scanner movement. If there is a problem with the scanner, there isn't a lot you could do except. The service manual says the scanner assembly should be replaced. If it was my printer, I would try to take a closer look at the scanner assembly and check to see if the scanner unit is bound up somewhere, or maybe a drop of 3 in 1 oil on the scanner rails. Let us know what happens.
thanks

Oct 02, 2013 | Office Equipment & Supplies

1 Answer

Prinnter not printing but showing 'put custom in manual tray'


There is still a print job in the queue. Place a sheet so it prints or kill the job.


Open Printers and Faxes. Open printer. Highlight jobs and Right click > Cancel, or Documents > Cancel.
For those stubborn jobs, Right click My Computer > Manage. Choose Services and Applications > Services > Print Spooler. Right click and stop. Then start. This may have to be done from the Print Server if it's network printer. Contact IT to kill.

Nov 09, 2012 | Office Equipment & Supplies

1 Answer

"Error sent to printer" problem with ZDesigner TLP 2844


have you gone to printers in control panel and made this printer with a tick in it so its the one the computer recognises

Dec 24, 2011 | Office Equipment & Supplies

2 Answers

We have forgotten the Administration password for our EStudio 350 & 450. Is there any way of resetting? Thanks Ben


restart machine ,then press the 0 & 8 keys,enter 263, then press Start. You should see admin password on the screen.

May 05, 2009 | Toshiba Estudio 200L Copier

Not finding what you are looking for?
Panasonic PanaFax UF-490 All-In-One Laser Printer Logo

Related Topics:

550 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5729 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...