Question about Pioneer DVR-213LS DVD±R Dual Layer Burner

2 Answers

"HDD REPLACEMENT IS NOT VALID..." error message

I install a Pioneer DVR-213LS DVD burner into a Dell computer. in Bios setup, PC recognizes the DVR-213LS, but when booting PC, it always pops up the message "HDD Replacement is not valid .... Strike the F1 key to continue, F2 to run the setup utility...." when run Window XP, the DVD burner seems reading OK (not yet trying to burn anything). Please advise what I should do to get rid of the error message.
PS/ The DVD burner is SATA type.
appreciate that.

Posted by on

  • grobbio Feb 12, 2009

    I have the same problem.
    On a Optiplex 755 Desktop, after I installed a 2nd Hdd,
    the  dreaded message appears..

    don't know what to do..

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi,
Go to http://support.dell.com/support/edocs/systems/latd630/en/AMT/MEBX.htm
You have to disable Intel ME State Control , and you do not get any pop up masages any more.
I hawe that problem with secundary HDD.
Regardes.

Posted on Dec 01, 2008

  • stepman69 May 21, 2011

    I received the "HDD Replacement Not Valid" error on my Dell Optiplex 755 after I installed a second hard drive. The solution is simple - In the BIOS, go to "Post Behaviour" and then "Keyboard Errors" and change the setting to "Do Not Report." The factory default is "Do Not Report." My first impression after making the change was that it wouldn't work cos I didn't think the error fell under the category "Keyboard Error," but it worked!

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check this link out - http://forums.seagate.com/stx/board/message?board.id=ata_drives&message.id=593

Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Pioneer DVR-111 D or DBK or DSV on my PC tower and it's been there for about 2 years. I also had a Sony Burner on the same tower so I could burn from 1 DVD to another. The Sony went out so I...


first make sure that your dvd drive has power. to test just press the eject button. go to device manager, find dvd/cd-rom drives there and expand it. If the pioneer dvr is present and has an exclamation point then just reinstall the driver for that drive. if not there then check in the bios if its there, just got to system information in your bios. If not there then open your tower and unplug and replug the cable connecting your drive to te motherboard. then check again.

Sep 16, 2010 | Pioneer Computers & Internet

1 Answer

System won't allow me to delete below entry HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318 in order to get pioneer dvd drive going again what do I do now thanks


Disconnect the drive from the PC or disable it through BIOS, then boot, remove the entry and, if you disabled the drive reboot the PC and enable it through BIOS, if you disconnected it then turn off PC, reconnect it and Boot.

Nov 18, 2009 | Pioneer DVD Burners DVR-K13 Burner

2 Answers

Computer not recognizing my burner


Hi,
This problem is due to the burning software that you are using.Use the proper software that comes with burner.

Sep 09, 2009 | Pioneer DVR-112D DVD RW Dual Layer Burner

1 Answer

Can't download Roxio Venue Suite that came with my optical drive


Yes, there is something to do with operating system because most likely it only works for 32Bit OS only.

Mar 11, 2009 | Pioneer DVR-213LS DVD±R Dual Layer Burner

1 Answer

DVD RW DVR-K16 does not recognize blank DVD-R


I have a Pioneer DVDRW DVR-K16, in a sony dv81114Notebook. Running Windows XP. It cannot play dvd's and cd's, It will recognize blank CD-R's but when I insert a DVD-R it say's no disc installed. I have firmware version 1.15.

Nov 26, 2008 | Pioneer (DVR-K16) DVD RW Dual Layer Burner

1 Answer

MY NEW PIONEER 215D..........PROBLEMS


try to set BIOS as auto detect
turned off computer & unpluged main power lead
unpluged IDE CD/DVD-ROM if any

Jun 12, 2008 | Pioneer DVR-107D DVD±RW Burner

1 Answer

Computer not recognizing dvd rw


You can get the drivers from the internet via google or yahoo by typing the name and model of your dvd rw and get the drivers.

Apr 23, 2008 | Pioneer DVR-111D (DVR111DBK) DVD RW Dual...

1 Answer

Pioneer DVR-112D disc recognition


what i would do is install one drive as the master on ide 2, and the other as the slave on ide 1 and what OS are you using?

Sep 13, 2007 | Pioneer DVR-112D DVD RW Dual Layer Burner

1 Answer

Wrong DVD/CD drive type


Did the Pioneer come with its own drivers if so then install those if not search google.com for the correct drivers youll find it will recognize the dvd?.

Aug 16, 2007 | Pioneer DVR-111D (DVR111DBK) DVD RW Dual...

Not finding what you are looking for?
Pioneer DVR-213LS DVD±R Dual Layer Burner Logo

4,871 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

David
David

Level 3 Expert

752 Answers

Are you a Pioneer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...