Question about Samsung LN-R409D 40 in. LCD Television

Open Question

Tv won't turn on (lights on/blinking)

My 40inch samsung blacked out, and the light is still on underneath the logo and red light blinks in the bottom right corner. When plugged in, the light stays on and red light continues to blink.

Posted by on

  • Anonymous Apr 05, 2009

    exact same problem as above

  • damallory Apr 26, 2009

    LIGHT BLINKS THEN "TRIPS OUT" FOR 10-20 SECONDS THEN DOES IT AGAIN

×

5 Suggested Answers

  • 298 Answers

SOURCE: Power light blinks

Circuit board problem pawer supply
and or horilz deflection HV
Requires proffessional Service
May be worth repair. you could
get an estimate, and then decide
whether to throw it away or not

Posted on Nov 24, 2007

  • 3 Answers

SOURCE: Power light blinks

I found a solution, Heat. When the set is on and heats up it stays on, but once off for the night it gets cold and can't start, try using a hair dryer on full blast and put the heat around the back top vent like structure and wait for the light to stop blinking, this only takes about 2 min or so

Posted on Jul 30, 2008

  • 1 Answer

SOURCE: Samsung ltm1555B - lcd tv blinking on button

I am having the same problem with the blinking orange light

Posted on Aug 31, 2008

  • 43 Answers

SOURCE: Samsung LCD 40" While LInes, Clicking Noise, Red light blinks

Your LCD has gone bad or their is a high voltage problem that powers the LCD. Usually a inverter board.

Posted on Jul 04, 2009

  • 304 Answers

SOURCE: I cannot get the tv to turn on. The red standby

You either have a bad T-Con bd or a bad Main bd. Have a trained samsung troubleshoot the set.

Posted on Jul 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My lg 52ld 550ub, has a problem . No picture, on lg logo comes on and red blinking light


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

May 18, 2016 | LG 52LD550 52Inch 1080p 120Hz LCD HDTV...

1 Answer

Red light blinking


google to see several posts on projection tv red light blinking from several different manufactures (sony; toshiba; samsung; philips; you name it) and several models.

http://www.avsforum.com/forum/63-rear-projection-units/975795-toshiba-65h81-went-black-blinking-red-light-help.html

Apr 16, 2016 | Televison & Video

1 Answer

Got a Samsung dnie model code spp4251x/data tv when powering up the front light comes on but no picture or anything anyone got some good info??


tv seems to turn on but no picture? - Forums - CNET

www.cnet.com > Forums > Samsung

CNETJun 11, 2015 - ... Samsung Dlp TV (HLR-5067W) it seems like the TV turns on butthere is no picture. ... the lamp is, light is visible from where the lamp is located but no picture. DLP Twon't turn on, blinking green lamp light then shuts dow ...
Jun 11, 2015
Samsung Plasma TV - Won't turn on
Jun 11, 2015
The timer, lamp, and standby/temp. light are flashing?!
Jun 11, 2015
Samsung TV Keeps Shutting Down
Jun 11, 2015
More results from www.cnet.com

TV with Black Blank Screen Repair How to Troubleshoot ...

? 3:16
https://www.youtube.com/watch?v=kFdVi2ejfzA
May 8, 2014 - Uploaded by ShopJimmy.com
TV Repair Help for a TV With a Black No Image on the Screen ...I Have A Sanyo TV I Can Hear But Black Screen Im 14 And Dont Know What To Do ! .... power button the power light goes from red to green, the screen flashes on then goes black ....Troubleshooting LCD Backlight Failure Samsung LNT-4066 ...

Samsung plasma tv repair blinking light no picture ...




Jan 09, 2016 | Samsung Televison & Video

1 Answer

When the TV is plugged in the screen is black,little red power light bottom right corner blink 5x then you hear the sound of power on pause then power off. This continues to repeat and no picture.


Repairing Flat Screen TV - Blacked out with blinking red light

? 12:00
https://www.youtube.com/watch?v=3GmtBthpzDk
Mar 15, 2012 - Uploaded by n1bpd
Repairing Flat Screen TV - Blacked out with blinking red light ...Capacitors are little cylinders with a flat top with an X. If they have failed the X .... picture, no sound, totally black just the red power light blinking on the corner ... hello i have a dynex dx-lcd42-09 the red light blinks as soon as i plug it in i opened ...Missing: 5x

comments on EASY HOW TO FIX SAMSUNG TV- NO POWER

https://www.youtube.com/all_comments?v=hgcmWO7mqmo


Dec 16, 2015 | Samsung 55" UN55D6420 3D LED TV Smart TV

1 Answer

Samsung TV won't turn on. Red light is solid, won't blink when pressed. All capacitors seem fine (none swollen or vented).


That model is covered under a class actions lawsuit settlement over bad power supply boards. You need to contact Samsung about this and get a warranty claim started, even if the original warranty is over the settlement terms will cover parts and labor. You can get additional information about this along with contact information here: http://www.ccl-la.com/blog/index.php/samsung-has-reached-a-settlement-in-class-action-lawsuit-over-faulty-tv-power-supplies/

Sep 24, 2012 | Samsung LN32A330 32 in. LCD TV

1 Answer

How can I connect 3-button remote to my genie intellicode model IS550/A?


The button closest to the Genie logo is the one that works, I just programmed it by pressing & holding the black button underneath the light cover until the red light above the button goes solid then blinks then stops blinking. Next I pressed the same button once and the red light blinks then pressed the button on the remote once then once more and it was all set.

Apr 19, 2012 | Genie Company Genie Series III 3 Button...

1 Answer

Tv will not come on. Red light blinking on bottom left front. Red light blinks 7 times


I have the model Philips 37PF7320A/37 won't turn on and MOST articles on the Internet say it's the Capacitors capictors capictors..I checked all of them. My tv just blinked red lights, had the clicking sound at first power on, but then goes black. No sound. No picture. Nothing. Just blinking red lights.

MINE WAS RESISTOR no. 3318 , a 100 OHM RESISTOR ON POWER SUPPLY BOARD.

I BOUGHT REPLACEMENT FOR .99 CENTS SOLDER IT, AND EVERYTHING WORKED!!!

THAT WAS ALL IT TOOK.

JUST A SUGGESTION..
1. CHECK FOR BULGING CAPACITORS (90 PERCENT OF THE PROBLEM)
2. THEN CHECK FOR RESISTORS WITH MULTIMETER ( FALLS INTO THE OTHER 10 PERCENT OF THE PROBLEM.)

TELL ME IF THAT HELPS..normanw1@yahoo.comj

Nov 01, 2011 | Philips 42PF7320A 42 in. Plasma HDTV

1 Answer

The red "on" light is blinking and the TV


a suggestion: unplug set and try to turn on again; if power light blinks does it blink in a sequence?

3 blinks repeated will mean a problem in the Convergence area.

5 blinks repeated will mean a short on the 140 volt line.

These are the two most common error codes.

SD TECH

Aug 31, 2011 | Panasonic PT-53WX53 53" Rear Projection...

Not finding what you are looking for?
Samsung LN-R409D 40 in. LCD Television Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71611 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1646 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...