Question about Dishwashers

1 Answer

Dishwasher will not turn on. It is a jen air .

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

I little more information is needed to get specific, like model number and what is actually happening. But the basics need to be covered like:  Check the circuit breaker on the panel to see if the circuit breaker is on and working Move the on/off switch to see if there are mechanical problems with the switch itself  Read the manual for specific things that you can do to get your dishwasher to start Make sure that the door is closing properly and the door lock is working properly Check the bottom of the dishwasher to make sure that nothing has fallen out of the lower rack into the tub and gotten onto the heating element or jamming the float
Hope this helps.

Posted on Oct 12, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Jen air dishwasher not draining

Are the dishes clean at the end of the wash cycle?

Jan 29, 2013 | Dishwashers

1 Answer

Jen air dish washer not shutting water

Open the door to the dishwasher. there should be a circular peice on the left or right side of the tub. it maybe stuck. if its stuck. the water won't shut-off.

May 28, 2012 | Jenn-Air Dishwashers

1 Answer

Out of the blue our Jen-aire jdb1105aws doesn't want to power up. No lights, no cycles etc. Checked the plug etc and no tripped fuses. Any thoughts appreciated.

If there is power present on the controller but not outputting to the circuits then it is possible toi have the controller faulty which can be getting error messages/fault messages from the sensor or a failure of the main board..

Sep 11, 2010 | Jenn-Air JDB1105AWS Stainless Steel...

1 Answer

We have hard water, is there a way to add something to our Jen air dishwasher to avoid the spotting?

Any Rinse-Aid product should work. We have domestic water at my house and it is a bit on the hard side. Will notice a difference when the Rinse-Aid is empty. You may check to see if it working on your unit. If it is extremely hard you may consider a water softening system.

Jul 14, 2010 | Jenn-Air Dishwashers

1 Answer

I can't get my dishwasher to turn on. The small

You appear to have a defective control board. You should have a Jenn-Air tech come out and test the control board. How old is the machine? Usually those control boards run $250+!! Compare the cost of the machine to the repair total.

Jan 29, 2010 | Jenn-Air 24 in. JDB1080AW Built-in...

3 Answers

Hi i have a jenn-air dishwasher JDB8910AWW about 10 yrs oldand started to have problems that it wouldn't drain now I can't get it to turn on..any advice??

I have a Jenn air dishwasher JDB8910AWW It fills with water but will not wash also i hear a clicking sound and the control panel blinks

Nov 18, 2009 | Jenn-Air 24 in. JDB8910 Built-in...

1 Answer

LG Dishwasher

I can't say for sure, but it is possible this unit is deeper than previous units. The only way to tell for sure is to measure the previous unit and compare to this one.

I would be suspect there may be something simple preventing the dishwasher from going all the way back into the cavity of the cabinets. Maybe the water line is in the way, the power plug, etc. are in the way. You would have to pull the dishwasher out and look it all over to determine if his comments are true or not.

Jan 23, 2009 | LG LDF6810ST Stainless Steel Built-in...

1 Answer

Soap does not desolve

check that the spray arms are turning and that the holes in them are not clogged, if you line them up pointing towards the front let the machine fill then as it starts to wash open the door and you should see the arms slowing down, if they are okay then check the water level which should just lap the filter at the bottom

Jan 07, 2008 | Jenn-Air JDB6510 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Brad Brown

Level 3 Expert

13732 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides