Question about RCA 27V530T 27" TV

1 Answer

RCA tv with no picture

I have a RCA Entertainment series TV and the picture is non existant. The sound is on but no picture at all..

Posted by on

  • JuanoX
    JuanoX Oct 24, 2008

    Hello, i have the same problem, i have a RCA 27V510T, the tv turns on, the speakers will sound but there is no picture on the screen.
    I noticed that when you turn on the tv, white marks on the corners will appear on the screen (i think and looks a good sign) also I have read that if you touch the screen and you feel static energy, the flyback is sending high voltage to the CRT so is working (is it true?) but when I am going to discharge the CRT to ground (the red wire to the CRT) I don't see any spark, I also moved the brightness screw on the flyback but nothing happens, please help,

    thanks a lot for your help

  • bigchris1028 Feb 09, 2009

    I have the same problem characteristics as that of JuanoX, although mine don't have sound at all.... will the recommended solution be the same???

    karen_mc1 and JuanoX, have you resolve your problem w/ this solution? pls post a reply if it's aOK.

    thanks a lot.


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Problem fixed, check capacitor CV018 100uf between the pin 54 and 55 in the video chip, the capacitor was leaking, also check the board for cracks.

hope it works for you.

Posted on Nov 03, 2008

  • JuanoX
    JuanoX Feb 17, 2009

    Hello big-chris, This problem was caused because while i was fixing the video, replacing the capacitors i cracked the board and fixed it, but some contacts where loose, so, for the problem of the vertical black line i recommend that you check the board around the flyback for cracks and for old solders.
    Regarding the sound, I think it might be a leaking capacitor, In my tv I changed some capacitors that where old, even though the tv had normal sound, but now the sound is louder and crispier than before.

    here are the schematics for this tv and similars (mine is a 27V510T)

    Hope this works


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have pioneer plasma tv about 6 years old. I turned the power on, sound but no picture. Do you think it is worth fixing?

plasma tv units consume considerable power and the latest led units don't so for the extra cost of a new unit , there will be a power saving over the years

Jan 08, 2017 | Pioneer Televison & Video

2 Answers

I have a rca model led65g55r120q tv flickers and no sound

Check all cables for loose connection, try another input for picture (DVD, BLu-Ray, etc). If none of the other inputs work then it's a panel problem (display) If one or more of the others work then it's a problem with either the tuner or the signal.

Jan 02, 2017 | RCA Televison & Video

2 Answers

I have sound but no picture on my tv

This is a popular question. Most of the time you either need to make sure all connections are not loose or just need to turn off your tv and receiver and unplug. Wait for 1 minute then reboot.
I recommend this short video as it walks you through some diagnostics for other possible problems.
Repair TV With Sound But No Picture

Nov 24, 2015 | Luxor Televison & Video

1 Answer

How to attach vcr to a tv using cable

attaching a VCR to a TV using cable is done with an RF modulator costing about 30 bucks from Walmartyou take the cable out from the VCR into the RF modulator. this device has RCA outputs separate video and audio that will go to your TV

Jul 14, 2014 | Televison & Video

1 Answer

Troubleshooting tv

you need to buy tv converter box,

Jun 16, 2014 | Televison & Video

1 Answer

How could I connect a Daewoo 42sm TV?, I can't afford cable so I use a converter box(analog to digital w/rabbit antenna)on my other TV and I was given this Daewoo TV and would like to watch it;please

If your converter box only has RF outpit connectors "F" type screw on it looks like this my be more of a monitor then tv.I took a quick look at the manual and didn't see any RF inputs so it appears it doesn't have tuners built in Looks like you'll need a box that has RCA output connectors.or others that will match what the monitor has on it for input types

Mar 06, 2014 | Televison & Video

Not finding what you are looking for?
RCA 27V530T 27" TV Logo

Related Topics:

848 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71611 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2292 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides