Question about Sharp Televison & Video

1 Answer

Lcd sharp tv model lc-26af3m it power on and after 10 to 12 hour it disply the picture and if we power off than again to takes same time to display the picture .pls help me on this problem .thanks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 99 Answers

I have solved a few of the sharp LCD tv problems. I might be able to help you with tht problem. If u from Maldives, U can reach me at Rifaa@hotmail.com

Posted on Nov 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am looking for base only for Sharp TV #LC65D93U. WHere I can find one?


Hello, the part # is CDAI-A368WJ01, and it's $233.00 everywhere I looked. If you will message me back on Tuesday, I'll see if I can locate a used on....tks

Sep 01, 2014 | Sharp LC-65D93U Refurbished AQUOS 1080p 65...

1 Answer

The tv goes off but there is audio.


If you have sound the inverter board has failed,or one of the ccl lamps has died .when you switch on the powersupply sends power but on receiving a fault condition from either of the two faults above will shut down power to the inverter board.

Len..

Apr 11, 2014 | Sharp LC-46SB54U LCD TV 46 inch Class,...

1 Answer

Power and OPC blinks, TV will not change Input modes


Try removing set and or a box if used from power for several minutes.

Dec 23, 2012 | Sharp LC-46SB54U LCD TV 46 inch Class,...

1 Answer

From 1 to 10 ten been the best how good are this tv 55PP9363H/17 1 TOSHIBA 6211M15 1 SONY KFSOWE620 1 MAXENT MX26X3 1 SAMSUNG LN32BS40P8D 1 MAXENT MX26X3 1 MAXENT MX42XM11 1 SONY KDLS2VLISO...


The Samsung LN40B540P8F I would rate a 9. Only God is 10.

All the DLP sets, you can throw out

All the Older Projection sets you can throw out

I would take the rest for scrap parts.

I hope this is helpful.

Dec 18, 2010 | Philips Magnavox 51MP392H Rear Projection...

2 Answers

Lcd tv loses picture, power lght flashes grn; picture return


It sounds lamp is weak in TV and requires replacement.
I would be in better position to help you out if you post model and brand of your TV.

Dec 31, 2009 | Televison & Video

1 Answer

RE: Sharp Aquos LCD TV, MODEL LC-37D40U Tried to switch the TV on via remote, and I hear the TV turning on, but then it automatically turns itself off again. Tried it several different ways using...


A component is shorting out, and the TV is auto turning itself off for protection. Usually it is a shorted out horizontal output transistor. Only a tech can fix this.

Nov 13, 2008 | Sharp Televison & Video

2 Answers

Sharp LC-32DA5U


sounds like youve had a pic tube go out,,probly just one and the other 2 are still good,,thats why it came bck on,,take it to a tv shop ,know ,,want be that much if its just one pic tube,,good luck

Oct 05, 2008 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Sharp model LC-20B6U-S now has no sound or picture. While watching TV yesterday everthing went out. Screem appears to come on but no picture or sound.


By this description it sounds like you have backlight to the picture which means the power supply in the set is working and the inverter board which powers the screen is working. Your problem may be on the main board if this is the case. I have repaired this set for the same symptom with two different problems. First it could be on the inverter board, and second it could be on the main pcb. Once on this model a piece of metal heatsink slid down due to operating temp. of set and touched bottom of main pcb causing a failure of the sound and picture. Either way, if you have no on-screen-display you will be replacing a circuit board. If you whine loud enough to the mfg. co. they may help you. But good luck.

May 29, 2008 | Sharp Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...