Question about Symphonic ST420FF 20" TV

1 Answer

Can't watch dvd

I have a RCA universal remote and a smyphonic tv. I was able to watch dvd before I switched to the tv channels. I programmed the rca remote for tv and now I can't get to game to watch dvd. What do I do to be able to watch dvd's?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

You need the original remote controller to be able to switch input modes.Universal ones don't work. If you don't have the original remote and can't find it ever then the only way to reach your tv is through coaxial antenna port. So you can buy an rf modulator ( very cheap) and connect your red yellow and white cables (rca cables from a dvd, game console etc) to the modulator then connect the modulator to your antenna with a coax cable. This worked for me. It placed the connection to channel 4 and other channels are still working,

You can buy the RF Modulator from: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180299245670

Posted on Oct 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I use an RCA universal Remote to pull up smart hub on my TV


RCA samsung smart hub Remote Controls Questions ...

www.fixya.com/tags/samsung_smart_hub/remote_controls/rca
RCA remote controls samsung smart hub related questions and answers. ... Pull upprevious . ... Set-up (Programming) procedure is too much to type in here, and is not ... How do i program my rca universal remote to my TCL 55 IN smart tv?

How to Program an RCA universal remote « TVs & Projectors

televisions.wonderhowto.com/.../program-rca-universal-remote-314361/
Mar 26, 2010 - If you just bought a new RCA universal remote and want to program it then this is for you. The first thing you have to do is hold down the TV button and tap and ... So do a little labor, pull out the remote, and kick your feet up on the table ... by step how to set up and work your remote control to enjoy carefree, ...

HOW TO PROGRAM TV Channel Button on CABLE Remote ...

? 3:20
https://www.youtube.com/watch?v=b7GjQVq1lnc

Jan 19, 2016 | RCA Televison & Video

1 Answer

I lost original RCA RTD155 remote and want to know where to get one,or can I use a universal one


I would recommend getting a Logitech Harmony remote. The benefit of this universal remote is that you can program macros to start all of your devices in whatever order you want them to turn on so you can have programs like "Watch DVD or Watch TV", the remote will switch your TV to the appropriate input and output channels.

 

The other good thing about this remote is that you can program buttons specific to your device. You simply plug this into your computer and type in your model number and it loads all of the codes automatically. The RTD155 is supported by the Harmony series.

 

Read more about them here:

http://www.logitech.com/en-us/remotes/universal-remotes

Mar 06, 2011 | RCA RTD155 System

2 Answers

I have a rca dvd recorder+vcr combo drc8320n i want to set up watching/changing cabletv channels on the dvd remote. i have tried buying universal remotes cheap& expensive but they no longer work on my


With cable input connected to "RF in"on rear of unit make sure vidoe input is set to "Tuner". This will show up on the TV screen. Change channels numerically or using up/down arrow keys on DVR remote. Note there is a slight pause between changing channels.You probably will have to "autoscan" for channel setup/etc. If you say your TV set is old; it probabaly is equiped with coax
connection only/set TV channel to "3" or "4". when yot opt to play vcr/dvd it will override your
cable channel selected. Hope this helps!

Apr 13, 2009 | RCA DRC8320 DVD Recorder/VCR

1 Answer

Direct tv on universal remote


For this type of problem you will need to call the RCA customer support at this telephone number 1-800-645-4994. Give them the model number of your remote control and ask them for assistance with your problem. Thank you for using FixYa and have a nice day!

Apr 04, 2009 | RCA 3-Device Universal Remote with...

1 Answer

Unable to get remote to switch to tv/video RCA remote tv is sanyo


It took me forever to figure it out. Press the input key, just below the 9. The TV channel should be on 3. Make sure you put your DVD in and press play manually, so you can see that it is on.

Hope that helps

Apr 03, 2009 | RCA 3-Device Universal Remote with...

1 Answer

Rca tv model f35673mb - lost remote.... switch to video ???/


I asume your game systems and dvd player are hooked up via the rca inputs.So all you would need to do is purchase a universal remote,program it for your tvand press ch00 which should be the video input.make sure your dvd or game system is on so you know if you are on the right channel

Nov 09, 2008 | RCA F35673MB 35" TV

1 Answer

My new universal remote


Jo have you plugged in the Audio and Video cable in correctly. You need to check that the Video cable is in the corresponding input on the TV

Jun 08, 2008 | RCA Universal Remote Control

3 Answers

Input Selection without a Remote


On either the front of the TV or a universal remote (which I assume you have already programmed) hit the MENU button. Go to option 4 "Channel". Go down to "List and Labels." Hit the CH up or down key until you see "FRNT" come up under the channel # heading. If your DVD is connected and playing, you'll see it playing now. Exit the menu to watch. You'll have to reverse the process to get back to watching TV, but there doesn't seem to be any way around this if you don't have your RCA remote. This process is guaranteed to work on an F27442 and will probably work on some other RCA models.

May 24, 2008 | RCA F27442 27" TV

2 Answers

RCA rcr311w remote won't change tv channel to Video 1 or Video 2 channel


my universal unit won't change the tv channels, everything else works except the channel changing. Does anyone have a solution., The company is only open during the week.

Feb 08, 2008 | RCA RCR311B Remote Control

9 Answers

Lost remote to 27in rca tv, how can i switch my tv to input/output mode so i can watch movies on my dvd playter? i have a rca univeral remote, but it will not change my tv to input or output.


using the menu button on the t.v. set an alarm for 1 min in the future. have the t.v change to channel 00 or the input channel @ that time. turn off the t.v and wait until the alarm turns the t.v on.

Aug 11, 2007 | RCA 27F534T TV

Not finding what you are looking for?
Symphonic ST420FF 20" TV Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symphonic Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2124 Answers

Are you a Symphonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...