Question about Heating & Cooling

Open Question

Digistat +2Rf I have a Digistat +2RF and since i have put it back on for the winter i find that the heating is coming on at the required time for the evening but the morning setting is not, i can't quiet understand what is happening as some mornings it come on and others it does not, i am not sure if this is the same days every week as it sometimes comes on a little later just as i am leaving for work at 7.45am.  please help me solve this problem, have tried reading the instruction but find i get lost with them.  what i would like is for it to revert to the factory settings,i have tried doing this with the instructions without success.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 16 Answers

SOURCE: iflo digistat+2RF remote control for combi boiler

there should be an overide button on reciever try checking if stat is still communicating with reciever when stat is turned up and down light should flash on reciever

Posted on Aug 17, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find post codes 59 cathcart rd rutherglen scotland


This is NOT a question about PC Desktops







However the answer is
Busby Glass
59 Cathcart Road
Rutherglen
GLASGOW
G73 2RF

(www.royalmail.com)

3.June.2014

May 09, 2014 | Computers & Internet

2 Answers

I need the operating manual for british gas wireless central heating thermostat control RC2, WR1, UP2.


These are Drayton Digistat controls re-badged. RC2 = Digistat2
WR1 = Digistat SCR
Cannot now find manual for Digistat2, but updated Digistat2+ can be found at http://www.draytoncontrols.co.uk/Digistat2RFProgrammableRoomThermostatWireless.aspx
The Commissioning Guide will show the SCR and now to reset it.

Sep 11, 2010 | Heating & Cooling

1 Answer

Drayton Digistat SCR thermostat not working.


Go online to www.cheapboilers.com who deal with this type of boiler. It would be very difficult to troubleshoot this boiler with the information supplied. I hope this will be of some help to you.
Sincerely, Shastalaker7
They should also be able to get you a manual for your thermostat.

Oct 27, 2009 | Heating & Cooling

2 Answers

How do you hook up the player to your television so you can get


UseRCA y's you can buy it in any walmart o Dollar store, to split the signal and use for both, also if you got a good one its a rca in orange (Dolby)on back of your dvd and your home theater.

Oct 17, 2009 | Televison & Video

2 Answers

Red alarm light on constantly and heating wont work unless over ride system


Have you tried turning one of the thermostats off.? They are both talking to the same unit and they may be arguing with each other.

May 21, 2009 | Dayton Water Heaters

1 Answer

I have a digistat scr with a flashing red light and no heating there is nothing wrong with the batteries, this only occured after a poweer cut.


Try this first before condeming the unit.

1. Turn off the power supply to the Digistat SCR (receiver unit)
and leave for 5 seconds.
2. Turn on power to SCR unit and check red light is on.
3. Press override button No.2 and check the green light comes
on and boiler fires.
4. Press & hold down button No.1 (Keep depressed), then
press No.2 and keep depressed. {The Red LED light will flash
a couple of times and then it will go out}
5. Now release both the buttons – {the two LED lights should
come back on}
6. Get the Digistat+2RF/+3RF unit and stand two metres away
from the SCR unit with the Digistat+2RF/+3RF unit in your hand.
7. Remove the battery cover and fit the batteries.
8. The Red LED light on the SCR will now flash for approx. 7
seconds.
9. This confirms that the radio signal is being sent and
received.
10. The Digistat+2RF/+3RF and the SCR are now successfully
linked by a dedicated RF address.

Mar 21, 2009 | Water Heaters

5 Answers

My Drayton Digistat RF3 boiler control is not working. The thermostat module indicates it is sending a signal, but the unit beside the boiler has a red alarm LED lit. I've removed the batteries and turned...


I found that this solved the problem hope it helps you too.

1. Turn off the power supply to the Digistat SCR (receiver unit)
and leave for 5 seconds.
2. Turn on power to SCR unit and check red light is on.
3. Press override button No.2 and check the green light comes
on and boiler fires.
4. Press & hold down button No.1 (Keep depressed), then
press No.2 and keep depressed. {The Red LED light will flash
a couple of times and then it will go out}
5. Now release both the buttons – {the two LED lights should
come back on}
6. Get the Digistat+2RF/+3RF unit and stand two metres away
from the SCR unit with the Digistat+2RF/+3RF unit in your hand.
7. Remove the battery cover and fit the batteries.
8. The Red LED light on the SCR will now flash for approx. 7
seconds.
9. This confirms that the radio signal is being sent and
received.
10. The Digistat+2RF/+3RF and the SCR are now successfully
linked by a dedicated RF address.

Nov 04, 2008 | Heating & Cooling

1 Answer

Iflo digistat+2RF remote control for combi boiler


there should be an overide button on reciever try checking if stat is still communicating with reciever when stat is turned up and down light should flash on reciever

Oct 23, 2008 | Lasko 5540 Ceramic Compact Heater

1 Answer

Boiler Thermostat


In desperation, I trawled the internet and am pretty sure that these are manufactured by Drayton, either a Drayton Digistat +2 or Digistat +3

Try this page http://www.gasapplianceguide.co.uk/drayton_central_heating_controls.htm

Good Luck!

Iain

Oct 02, 2008 | Hardware & Accessories

4 Answers

Problem with IFLO Digistat RF2 (Wireless System)


To reset the system:
1) Pull out the left & right draws from the bottom of the remote and remove the batteries. The screen will go blank after about 20 seconds.
2) Go to your control panel:
Press 1 once
Press 2 once
Press 1 & 2 together for about 5 seconds until you get a solid light (it doesn't matter which light) then release.
3) Put the right draw batteries back, then the left draw.
The system should start. If not, press 2 once.
It worked for me!

Jan 01, 2008 | Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2519 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...