Question about Panasonic Lumix DMC-FZ8 Digital Camera

1 Answer

White screen (no image) on a Pansonic DMC- otherwise functions properly

I don't know....... I was taking pictures yesterday when suddenly the screen went white and there is no image on the screen. However, it takes pictures and I can download them on my computer. Yikes, I just don't know what I am taking pictures of. It is just point and guess..........

Thanks for any help you can give me with this - otherwise a new camera in in the near future.

Betty

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Hello Betty,

I am sure you have tried this but I will mention it again. Remove battery from camera, let it charge and pop it back in. That may clear up the problem.

Maybe the issue is due to EVF (Electronic View finder). Clicking the EVF button (Next to the viewfinder on the right) might put it right.

Incase I have misunderstood the situation, kindly explain it to me once again.

Regards
Satdeep

Posted on Oct 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lcd screen gone wonky


This sounds like the screen is damaged. When you are taking the photo, can you see the image clearly. If not, the screen is damaged and you need to replace the screen.
If you can, however, see the image clearly, then check that your settings aren't putting on any effects

Jan 08, 2014 | Panasonic Lumix DMC-TZ3 Digital Camera

1 Answer

Panasonic DMC-TZ3 Purchased in 2007, the camera has worked fine until now. It has not been dropped or anything. Suddenly now there is a very bad purple distortion both on the LCD and the pictures I...


Most likely this is either an issue with a custom white balance, color tone, or the image sensor is starting to go.

Set the white balance to AWB (menu -> W.Balance).

Try to adjust the color (usually has options like sepia, cyan, black and white normal, etc).

If these fail a lot of cameras have a reset to factory settings.

If none of these suggestions work, its probably the image sensor.

Please leave feedback if this was helpful. Thanks!

Mar 18, 2011 | Panasonic Lumix DMC-TZ3 Digital Camera

1 Answer

I have Panasonic Lumix DMC TZ3 camera and it suddenly stoped working when i switch on the lcd is black first i thought my lcd has problem but i can see images from my memory card very well only when i go...


Hello

First, if the camera turns on and the lens extends properly, toggle your "display" button until the screen image returns. (you can turn the display off via this button and is most likely the issue).

Otherwise, it would indicate a greater issue that would require the camera to be sent in for service.

Mar 10, 2011 | Cameras

1 Answer

Panasonic Lumix DMC-ZS3 When I focus the camera


hi
you have a problem wtih the photo shutter of camera
you must replace it
the cost of it is to high you better replace the camera

Jan 09, 2011 | Panasonic Lumix DMC-ZS3 Digital Camera

2 Answers

Screen shows no image for picture taking or playback


Is this Sony DSC-T1 camera or some other model? let me know to help you out.

Jun 15, 2009 | Sony Cyber-Shot DSC-T1 Digital Camera

2 Answers

Panasonic Lumix DMC-FX12 upsidedown screen


The issue is due to the data cable getting damaged due to the way of packing it inside the camera casing. The signal carrying traces on the edge of the felxible cable is getting damaged. Once the camera is opened and the cable is repositioned properly/replaced will solve this issue.

Rajeev Bose

May 14, 2009 | Panasonic Lumix DMC-FX12 Digital Camera

1 Answer

My camera does all the proper functions but when you look through the lense all I see is black it does not show images. I take the picture and all you see is black, because that is what is in the view...


1. lens cap. had to say it, you know that! i assume it's off.
2. settings. once i had my lumix set on a certain white balance (dial, manual, menus) , and it let in so much light that all my shots turned out completely white ( i wasnt reviewing the pictures at the time). make sure you didnt put your camera on some setting that's blocking out light. try automatic by turning the dial.
3. try to reset your camera to factory settings using the menu system. sometime you get lost on the menu system and change an important finction that completely changes what you get when you take pictures.

Jan 31, 2009 | Panasonic Lumix DMC-FZ50K Digital Camera

3 Answers

My DSC-T1 Camera only takes barely visible pictures


Its problem of ccd imager in your DSC-T1 camera and that part will be replaced.
Sony announced free of cost repair for subject problem. Click Sony CCD Support for details.

Oct 01, 2008 | Sony Cyber-Shot DSC-T1 Digital Camera

2 Answers

Hi i have connected up my wii to a samsung wide screen using the yellow red and white cable have got sound and picture but am unable to get colour after trying all combinations do you no how to sort this...


Why don't you just take it to Best Buy or where ever you got it from and then exchange it or you could return it and git your $ back!!!!!!!and rate this Fix Ya please!!!!!

Dec 25, 2007 | Nintendo Wii Console

1 Answer

When using the zoom button the cam stops working


This suggests the zoom motor has failed. As you only purchased it 2 weeks ago - it should be replaced under warranty

Aug 21, 2007 | Panasonic Lumix DMC-FX50 Digital Camera

Not finding what you are looking for?
Panasonic Lumix DMC-FZ8 Digital Camera Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Cameras Experts

kakima

Level 3 Expert

101554 Answers

The Knight
The Knight

Level 3 Expert

71672 Answers

Jay Plesset

Level 3 Expert

2821 Answers

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...