Question about Tripp Lite System Power Supplies

1 Answer

Flashing orange light on ups

Positive/negative slash icon symbol indictor lighted up and orange light flashing

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

What is the problem?

Posted on Oct 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Protection light flashing and alarm sounding, unit was running and the unit just quit and the flashing light and alarm came on


Will the unit power up without the cb radio? I would suggest a short somewhere in the system if the protection light continues to shine bright.

Mar 24, 2013 | Pyramid (PS36KX) 600-Watt Power Supply

1 Answer

It's an Acer Aspire One 110 running Windows XP. When battery is inserted or power supply plugged in, the green light on the power button comes on and as long as there is power going to the machine the...


Hi

Thank you for your query

It would seem you have a possible DCf jack problem, causing the mentioned issues

If the DC jack is faulty it can cause the problems mentioned above.

I would recommend that you book the laptop into a reputable PC shop for them to replace it

I hope this has been useful

Mar 16, 2010 | System Power Supplies

1 Answer

Flashing orange light on front of my dell 5150 desktop, will not turn on, even after unplugging for one hour. when plugged back in, flashes orange, no fan, no power. JK


So basically you cannot get the pc to POST. Meaning you have just a black screen when you power on the pc, right?

First off, did you attempt to update BIOS before this happened. 90% of the time this is caused by a corrupt bios.

If you did not try to update BIOS before the problem started then try these troubleshooting steps.

1. Full power down. Unplug the power cord from the Power supply. Then hold down the pc power button.
Try to boot the pc.

2. Open the case and reseat the graphics card, hard drive, and RAM.

3. Take out one of the RAM sticks if there is 2 or more. Swap the RAM sticks in different RAM slots.

4. Set the Cmos jumper to clear. Power up the pc. Power down the PC. Set the Cmos jumper back to normal position, power up the PC.

5. Unplug and replug all the power supply cables.

6. Check the powersupply function. Either by a powersupply voltage checker, put the powersupply in a different pc, or try a different powersupply in the problem computer.

Could be bad ram, motherboard, cpu, powersupply, videocard.

Jul 05, 2009 | Dell System Power Supplies

1 Answer

Mac Ibook Power supply problem


On Mac iBooks the orange light comes on when it charges the battery. Once the battery is charged it turns green. Im guessing the other powersupply was aftermarket or broken. EIther way, if it starts out green - recognizes the battery isnt full - turns orange for a while - then turns green when the battery is full, then the computer and powersupply are working perfectly. Enjoy your iBook!

Feb 27, 2009 | Apple System Power Supplies

1 Answer

My computer ps is not providing power to the mother board or any of the periphals. It is a Bestec ps the led on the back of the supply flashes very slowly. Any suggestions before I go out and replace it?


Disconnect the ATX main connector, bridge (with a wire clip) the green wire and any black (negative) wire, this should allow you to power up the PSU... now take a digital multimeter and measure the voltages on the 3.3v (orange), 5.0v (red) & 12v (yellow) lines, you will need to place the negative lead off the DMM on any black (negative) wire to achieve this...

If your PSU is off specification ie. more than 5% variance this IS your issue.

FWIW Don't waste your money on another Bestec PSU

Jan 18, 2009 | System Power Supplies

1 Answer

Bestec ATX-300-12EB3


There should be 12v coming from the yellow wire and 5v from red. Open PC and use a multimeter to check the voltage output connect negative probe to the power supply casing and the positive to the red and yellow wires from the molex connectors. If the readings are below the mentioned voltages then the PSU is faulty. Note if readings can be round off to the given values then the output is fine. cheers.

Nov 22, 2008 | Bestec (ATX-250-12E) 250-Watt Power Supply

1 Answer

Orange flashing lights


May be the power supply gor affected by the damage because the cd rom busted so better than trying to use the same power supply better get another new one because it may damage the other parts of the computer.......

Mar 18, 2008 | Gateway Emachine Bestec ATX-250-12E PS...

Not finding what you are looking for?
System Power Supplies Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tripp Lite System Power Supplies Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a Tripp Lite System Power Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...