Question about Janome Memory Craft 9000 Computerized Sewing Machine

1 Answer

Used/new motherboard for MC 9000

Does anyone know where i can get a used or new motherboard for A Janome MC 9000.. IMy husband is going to replace it if i can find one...

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 323 Answers

This can be ordered from a Janome dealer only and he will have to order it from The Janome Company. They are not cheap so get the price first. It will be better if you can get him to install it for $70-80 dollars more because there may be some adjustments which need to be made when he finishes. It should also be cleaned and lubricated.That being said, I have a few questions for you.
When you plug the machine in and turn it on, does it light up at all? If the answer is no, then you need to check the lead cord.If the lead cord is okay,Then you need to check the fuse wich is located in a black box inside the bottom of the machine. Be sure you diagram the way the wires are before you disconnect them. Disassemble the black box and you will find 2 fuses in it. Usually only one is bad and it will be a 3.0 slow burn fuse. You will probably not find this at Radio Shack but you can find a 3.15 slow burn which works very well.. Be sure to reassemble everything the way it came apart. While you have the bottom of the machine off, blow it out wih air and lubricate every part that moves and rubs with a good quality sewing machine oil (not 3 in 1)

Posted on Oct 13, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the bulb located on the MC 9000

You can find it inside the side cover (left hand side).

Dec 14, 2013 | Janome Memory Craft 9000 Computerized...

2 Answers

I want to sell my 1991 New Home memory Craft 8000 sewing machine

A good place to see what machines are selling for is Ebay. That's where I sold a sewing machine and an embroidery machine.

It helps to know your product and machine embroidery lingo.

What are cassettes? Floppy disks? These make the machine borderline obsolete.

Memory cards are still around, but most EM now have USB connectivity or USB flash drives.

Satin thread? Embroidery machines use Rayon or Polyester embroidery thread.

Having had the machine recently serviced is also a plus.

Mar 19, 2010 | Janome Memory Craft 9000 Computerized...

1 Answer

How do i install my el board in my janome mc 8000 sewing machine

Try this link for an affordable solution to repairing your Janome MC 8000 Display Back Light Janome Memory Craft 8000 LCD Backlight Replacement Kit. The kit comes with a custom repair manual specifically written for back light replacement.

Dec 28, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

Hi where can I get new screen for my MC 8000

Janome no longer supply this component, however they are available in Australia at this site .....just scroll down to find the LCD Backlight to suit the Janome MC 8000 and MC 5700 on this page...HERE
Instructions for installation are also sent in advance so you can decide whether you feel up to the task or would prefer it were done by a technician.
We can also advise your nearest Janome Tech if required, just ask.

Jun 23, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

I have a Janome MC9000. The touch screen is out of sync with the icon. I purchased on eBay so no dealer will touch it. Only one function on the extreme right hand (the instruction panel) works (the menu...

If you would like instructions on How To Reset the Touchscreen for the MC 9000 (or other model Janome) so that the icons re-align, please use the link below to contact me and just make sure to mention the specific request and model number (we get a LOT of mail).
Same Reset offer applies for other Janome Touchscreens, and we even even have a replacement LCD Backlight for any MC 8000 or MC 5700 that is growing dim.

Jun 19, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

Janome memory craft 9000 what type shank

If you contact Janome HQ in your country, they should be able to tell you which dealer is closest to you, and the part number of the ruffler foot to suit the MC 9000......

....the technicians and questioners on this site come from all over the planet, so the where to go will depend on where you are !!

Keep it local

Jun 02, 2008 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

191 Answers

Eva Hack

Level 1 Expert

25 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides