Question about Maxtor Hard Drive Accessories

1 Answer

I need to remove the hard drive from a Maxtor personal storage 5000le case

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,061 Answers

Http:// instructions may be obtained here.richardm69

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

When i plug my USB Mass Storage device it says "there is no disk in Drive F:

The enclosure may not have a working drive inside, or the drive may not be formatted with NTFS or FAT 32.

Apr 08, 2011 | Sony USB2.0 Hotswap Removable Enclosure...

1 Answer

I had a problem with my charging cord on my adaptec 3.5 mobile drive .It reads that it finds it on the computer but dose not read the drive completely, nothing shows the drive is there so I took it to a...

You can physically remove the harddrive inside the case and connect it into another computer as a slave drive. There should be two cables - one for the data and the other for power - connect these two inside the computer next to the master harddrive.

Oct 31, 2010 | Adaptec 1 Bay ACS-100 (2177400) USB 2.0...

1 Answer

Bytecc BT-300 USB 2.0 drive mate problem : I am a PC user with WinXP O/S. My BT-300 worked fine when used along with 2.5 in laptop hard disk (power cable connected to drive mate). On the other hand, I am...

First is the "Drive" formatted? It will not work, if it is a new drive, until it is formatted. And/Or "Initialized"? If it has data on it already then it may be faulty? the only way to check that is to try it on another machine... also are you 100% sure you have it connected right way around, I have made exactly that mistake, before, I learnt whats what. Also try another USB port, this sometimes works. Try the setup on another PC to check it is actually OK.

Feb 22, 2010 | BYTECC USB2.0 to IDE Adapter Kit...

1 Answer

Need to open the case of a Mactor OneTouch III to

well i dont think we will be able to open the case of the hard drive commonly because a hard drive is the safe casing of the very expensive metal disc which is used to store the data on to it and it is done by using magnetic energy so normaly a hard drive cannot be dismantled by the user but may be the drive manufacturer can do this only in the extreme needs.

Good Luck.

Jan 07, 2010 | Hard Drive Accessories

1 Answer

I need drivers for imation odyssey 40G

you can download the driver from the internet

Dec 22, 2009 | Imation Corp. - Odyssey 40G Remov HDD...

1 Answer

Looking for best deal on DNS-323 + 3TB hard drive

My personal choice would be for Western Digital green series drives

7200 RPM drives with as large a CACHE as possible would be the main part of my specs.

Faster speeds are becoming available but they are still quite new technology so just for now you might want to cross them off the list too

Seagate has taken some hits recently with firmware issues so for the moment they would not be on my list either

SATA interface hard drives ar the only ones supported by this unit so other than what I have said the choice is quite large.

Aug 21, 2009 | D-Link DNS-323 2-Bay Network Storage...

1 Answer

Explorer does not see the hard drive

sounds like drivers are not installing correctly or you need software installed to see the drive go to there website or give me the make of drive

Aug 20, 2009 | Hard Drive Accessories

1 Answer

What 2nd "Slave" hard drive should I buy to match my "Master"?

Any size hard drive should be compatible, but you should get the same connection type and bus speen if possible (ATA/133). If you get one from a different manufacturer, you'll have to install the bios update that comes with it and set the jumper to slave per the instructions that invariably come with any "add-on" hard drive.

Dec 29, 2008 | Mobile Rack - 3.5 Inch Hot-swappable...

1 Answer

Power does not go to the hard drive.

Have you checked the voltage transformer leading from the electric outlet transformer to the external hard drive? It should be abotu 12 volts. If not , replace transformer.

Dec 25, 2008 | Maxtor USB 2.0 External Enclosure + Hard...

1 Answer

Maxtor one touch usb hard drive

I would remove the hard drive from the case and slave it to my primary drive inside the tower. If it is out of warranty then it is likely old and about to die. Maxtors do not exactly have a reputation for longevity. Your best bet would be to image it and restore the image on a new drive.

Mar 19, 2007 | Maxtor USB 2.0 External Enclosure + Hard...

Not finding what you are looking for?
Hard Drive Accessories Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maxtor Hard Drive Accessories Experts


Level 3 Expert

281 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

382 Answers

Are you a Maxtor Hard Drive Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides