Question about Computers & Internet

1 Answer

Manual for aopen ux945g

You have been so helpful in the past i hope you will again. the site you directed me to does not have my exact motherboard layout and i'm unable to find the proper directions to reattach everything needed to the board. what do you recommend??? thanks, steven

Posted by on

  • 1 more comment 
  • swwagner Oct 10, 2008

    these guys have gone above and beyond for me in the past. the fact the info i needed was not on the manufacturers site in no way effects the quality of service i received here. i am grateful for their assistance. steven

  • swwagner Oct 10, 2008

    thank you for all you are doing. this particular board has usb, firewire, spdif, front panel audio, mic, usb and firewire. it also includes remote sensor as well as full display. the board is so crowded and the abbreviations are such as to require the manual. it is an atx mini and the board itself measure 7.5x8.5 so you see my delema. once again i thank you for your assistance. i'd love to know all you have forgotten. steven

  • swwagner Oct 11, 2008

    thanks so much. i will download the manual for one of the 945 board schematics and zoom in on the pin config. you have been alot of help. i appreciate your efforts. steven


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

I am doing more research and trying to get the manual so please bare with me. I found a site but the manual is not downloading so I'm still looking for you. it seems there is a problem with getting your piticular motherboard manual but i will still be looking. one thing you could consider is looking at a motherboard manual that is simular to yours, because the pins and the RED FIREWIRE wire hook up will be the same, but I will continue on looking for It. also just a little hint on the pins , each set of pins on your board are very close to the intended connection , USB , AUDIO , ECT...

Posted on Oct 10, 2008

  • jason Oct 11, 2008

    Ok ,I've done some more research and you should be able to use any of the same models pin out configurations the pin assignments are the same I have looked at the pinout specs.from different ones and the pinouts are the same just not in the same place on the board. Each funktion has a ground- and a positive+5 like the power button the reset button , hdd led , pwr led , speaker. The remote sensor will be the same hook up as will the rest, In these manuals they will illustrate what each hook up, pinouts , connections on the board will look like and how they should be connected. you can zoom in on the illustration to see better what they look like and what each pin represents and what is supposed to be connected . if you are having a problem hooking some of them up just let me know and I'll explain the connection.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need a manual for the AOpen ax4pe motherboard

I've included a link to the manufacturer below. From the three drop-down boxes choose "motherboard" then the model "AXPE" and then "manual". The site is slow, so when making the first selection be patient and wait for the site to respond and fill the second box with the choices, and same with the third. You can download drivers from the same site. Just choose "drivers" instead of "manual".

Download Here

If you find this solution to be helpful, then please take a moment to rate this post. - Thanks.

Jun 21, 2010 | AOpen AX4PER (91.8AE10.001) Motherboard

1 Answer

Aopen mx4sgi-4dn2 manual

Here's a direct link to this motherboard's manual:

Dec 04, 2009 | AOpen Computers & Internet

1 Answer

Amd 2600+ doesnt work

Check your bios version and make sure it is correct bios. You can check the Aopen site to download the new bios and flash utility to install it. Be carefull and make sure that it is CORRECT bios for EXACT Motherboard. The bios can be flashed wrong and leave you with a paper weight. Good Luck

Nov 22, 2009 | AOpen AK77-8XN Motherboard

1 Answer asks Does the AOpen MX34-U


Yes it has onboard audio.

Here is a manual link:

You can go to the Aopen sit eto download the driver if it is not working.

Go to and Select Motherboards in the drop down Product Selector. Then select your MB model #. Then select the category...if you need the Audio driver, select Driver. (Manual, Bios, etc.)

Thanks for using Fixya.


(Note: The manual link is from Netherlands. Had trouble with US site.)

Jul 11, 2009 | AOpen MX34 (91.88510.101) Motherboard

1 Answer

Connecting wires on the board

Hi There.

I hope this will assist you in your problems:

This is the mainboard guide, this page will show you the exact locations of the connectors and which ones does which.

Hope this Helps

Oct 13, 2008 | AOpen AK77-600n Motherboard

1 Answer

Aopen ux945g motherboard

all the cables should only fit in one way , IDE1=hard drive , IDE2=disk drive , you need to look carefully at each one for notches that fit into slots. are there any specific cables that you are refering to?

Oct 08, 2008 | AOpen Computers & Internet

1 Answer

Aopen MX3W PRO MOTHERBOARD (-V) pin location for power on

Hi enoschan,
Download the pdf manual AOpen MX3W Pro motherboard. Click on this link:
Fill in the three drop down menu's as follows.
Choose, click on: English manual for MX3W Pro, MX3W Pro-E, MX3W Pro-V. 6200Kb, (They all share the same manual). A pop-up window will open. Under Mirror Sites click; USA, San Jose.
You may have to wait a few minutes before the pdf manual will open. Do not download this manual unless you already have Adobe's pdf reader installed. If you need the Adobe reader, download it for free from here:
Once the ftp: pdf manual opends go to Motherboard Map for the location of the pins you have in question. To connect your case LED's to the motherboard goto page 29 in the pdf manual.
I hope this information is whay you are looking for.
If you need more help with anything just let me know.

Good luck enoschan!

Aug 17, 2008 | AOpen MX3W Pro-E (91.88210.241)...

1 Answer

Manual for aopen mk77m11
contains the drivers, bios updates, manuals, and other assorted downloads for various Aopen motherboards. You will have to select your particular mainboard from a list, and once the mainboard is selected you may have to suffer a small delay before more pertinent data shows up. Info is coming from Taiwan and even here in Korea is was slow but then again Aopen had a large selection of systems last time I used them.... As always before updating any bios, pay attention to small print.

Jul 31, 2008 | AOpen AK77-8X Max (91.8A710.101)...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

912 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides