I've had my camera for a few years and always worked fine. I charged my camera the other day and instead of removing from plug after 2 hours like I normally do, I fell asleep and overcharged it. When I turned it on, the screen image has lines and pictures are all out of focus and blurry. Any help is greatly appreciated!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please go to Setup menu and select Initialize option to reset camera to default settings that might solve blurry picture problem, if that does not help then its technician job to adjust focus of camera. Thanks.
Hello, yes a few suggestions "grainy" could be from an auto ISO setting the sensor speed high as in possibly ISO 400 even 800 or higher you get the pictures but it's grainy. On pocket point and shooters this is most often the case in full automatic modes and on your camera it's called "Intelligent ISO Mode" You should consult your manual and select a more user selectable ISO speed manually. Another feature with your camera is image stabilization this you can turn on or off preferably off when the camera is mounted to a tripod. Okay for the blurry part on the zoom the quickest way to explain this is every tiny movement you make holding the camera is magnified 10 times, this is where the image stabilizing feature would be handy. Jennifer in my younger days I could hold a 35mm camera with a 300mm lens steady at 1/60 of a second now I use only a 200mm lens with image stabilization "on" to get the same results. What you have is a full time auto everything camera if it's working for you it doesn't matter if it's 3.5 years old. You are still working with a 7.2meg camera with a print capability of 11x14. hope this answered some of your questions.
I had also the same problem with my Canon A430. Mainly this problem is due to stuck of the camera shutter, always in open mode, images are overexposed due to this.
I had the problem with lens flex cable, which was partially damaged due to movement of lens and one coil was not working, due to this one shutter was not working and remains always in open mode. There are two coils, which operates the 2 shutters. I purchased the lens flex cable from ebay and replaced it, now it is working fine. Your problem may be the same.
Its bad ccd imager problem in DSC-T1 and ccd imager will be replaced. Sony will repair your camera free of cost for same problem as per announced scheme.Only $20 for shipping charges. Click Sony CCD Support for details.
Defective ccd imager!! company will replace this ccd imager free of charge. Year 2002 up to 2005 released unit has a factry defect ccd imager. the company recalled these unit and replaced with a stronger version of ccd imager( they are still doing it). check it out.
you can repair your camera free of charge. Please check this link:
If you need more info please advice.